seem the splitter used connect to alarm system at another location via the wall socket, right?

Yes alarm has cable in the telco box at car porch and patched to the phone cable.

do you need more info before you can make recommendation? i will probably need 1 set that has RJ11, power & maybe data protection while the other one just for power protection.

This post has been edited by jutamind: Nov 2 2015, 08:36 AM

I use unifi fibre optic at my condo. Do I need to protect the telephone wire outlet?

Ops haha okok... Can u pls pm me the best price for TRM-NIF-AV BU+PE?

for your case, 2 units of MDSC0039 and SP9201DAF or SP9201ARD with RJ11 splitter will sufficient.
Do let me know by tomorrow so can i collect stock within this few days...

as long as the telephone located side by side with Unifi BTU, protection not required for tel cable...

Thank you very much sir. cheers

Hi,

Does MDSC0039-FC support Astro cable connection, ie cable from dish connect to MDSC0039-FC and from MDSC0039-FC to decoder?

For SP9201ARD, do i connect the RJ 11 from wall phone socket to this device (From Cable port) and use another RJ 11 cable to connect this device to DSL splitter (in my case)?

If yes for both questions, then i would like to order:

1. 1 unit of MDSC0039-FC (just in case next time want to subscribe to Astro)
2. 1 unit of MDSC0039
3. 1 unit of SP9201ARD

yes, MDSC0039FC can connect 1x Satellite Astro dish

basically alarm system and DECT phone are analog based, you dont need ADSL spliter filter for this case...
just a usual 1-2 RJ11 splitter will do...

What's the difference between SP9201DAF and SP9201ARD? If i use SP9201DAF for my device configuration, does it mean i plug my RJ 11 from wall phone socket into one of the port and plug the cable from DECT phone into the 2nd port and plug this device to BTU? Is it supposed to be connected this way? I cant visualize how the connection between this device, my RJ 11 cable from wall phone socket, DECT phone and connection to BTU.

Please PM your phone number so that i can whatsapp you for faster response.

This post has been edited by jutamind: Nov 3 2015, 12:49 PM

Just got my 3rd MD-PLC-3 from TS. Great service as always.

Highly recommended if you use a powerline system in your house. I don't have exact benchmarks, but there's a noticable difference in stability and quality when using it.

Could I used Cal-Lab with UPS? Coz my place also got electricity outage problem which cause data lose of my hard drive , and I've been thinking about using UPS for my storage.

gkl83
Hi, I have purchased the SFTV9622FC (power+astro+telephone+antenna) to protect my TV which is connected to the Astro Decoder connecting to the astro dish.

Yesterday, lightning strike my Astro Dish and it gets toasted but somehow my Astro Decoder and TV did not get black out. Astro decoder seems working fine, however my TV is unable to display any video signal (blue screen) except for outputting audio signal.

I have tested on another new TV and video is working fine from Astro Decoder. Does this mean SFTV9622FC has failed to fully protect my TV?

My SFTV9622FC is still able to pass electric through (the fuse seems not to blow up after receiving the lightning strike).

====

UPDATE: 2015-12-04
The Astro man came to repair our Astro Satellite Dish, he told us that the Astro Receiver (black box placed beside TV) is also spoilt even though it can show the Astro menu (It can't connect to the satellite dish on the roof).

This post has been edited by asunakirito: Dec 4 2015, 07:18 AM

Please drop an email to callabkl@gmail.com & callabhq@gmail.com as i'm not working direct under Cal-Lab
Please provide your equipment diagram connectivity while you sending email for inquiry.

Anyhow, Cal-Lab cannot predict how the surge sources come from and caused equipment damages and highly subject how user perform the installation methods. Any surge can over air easily and the partial unprotected cable for astro dish may too near with your TV signal cable.
We always recommended to isolate the protected cables & unprotected cable with a distance as surge can "jump'' across different media easily.

Hi guys..new to this clli sf9512. Currently just plug and play..plug an extension to the sf9512.wandering if it can support my fridge which is connected thru the xtension.need some advice ..thanks..where does the green wire
go

gkl83
Whats the difference between SF9512DSL and (MDSC0039 + SP9201DAF) if I were to use it to protect phone line + internet (Streamyx)?

I noticed that this SF9512DSL has a green wire coming out. What is that for?


This post has been edited by asunakirito: Nov 16 2015, 08:42 AM

hi , so do advise for protect , 1 x cpu , 1 x lcd and printer and lan network , which should 1 buy ? so many model number make me confuse

My setup mainly consists of TV with antenna, amplifier, DVD player and HD media set top box. No Astro & UniFi connected.

Which model is more suitable? sftv9622-FC or -MS3?
MS3 stands for 2 UK outlest + 1 US outlet according to Buy-Guide Table from official website. Correct me if i have misundererstood.

Please recommend other models which might apply to my setup. Thanks.

What is the difference in the electronic component between this Surge Protector and Bekin Surge Protector ?

Hi gkl83,

I'm looking at protecting my household appliances from lightning catastrophe :-). I'm a little confuse on the model and type of cab lab protector to use. Hence need professional advice from you. Below are the type of appliances I wish to protect.

Kitchen Area
====================
1) Fridge
2) Washing Machine
3) Cooking Hood (not sure if need to be protected ;P)

Living Room
====================
1) TV
2) Unify Fiber Internet
3) Entertainment System

Bed Room x 4
====================
1) Ethernet LAN point
2) TV

Attic
====================
1) TV
2) Ethernet LAN point
3) Entertainment System

Please pm me the model, number of protector and the pricing. Last but not least, does cab lab deliver to JB as well?

It can support Fridge but SC9512DSL maximum can support up to 1000 watt only


MDSC0039 + SP9201DAF can support ADSL modem and Analog Telephone
SF9512DSL only supported to ADSL Modem only, not for Analog Telephone. Your ADSL Modem may instable if 9512 connect with Analog Telephone.

You can use SD-4C as the entry level but only support 100mbit speed only


Your HD Media set top box connected with any LAN Cable?


Belkin using conventional arrestor components.
Cal-Lab using patented isolator design and the design cannot be manufacture by Belkin and others.