r3apers, try search for

LIEBE by Ayla from album NIRWANA

Washed twice ady don't wanto read my post ar

Drag me down water do what? I drive sensually, just like any other gentlemen ok The other day during TT, they start drag I also went far far away jor

T25 LED BULB x 2pcs (BULK)




Spec: Single contact T25
Power: 12V
LED: 18 SMT
Dimension: L49 x W15mm
Price: RM26/pair
Closing date: 17th January, 2013
Payment method: Cash before order(maybank2u,cimb) to avoid FFK/disappointment
Delivery method: TT delivery ONLY. Not available for oustation sorry.

Since I'm ordering for Unker Choy, might as well make a bulk. Size is T25, suitable for signal lamp. Take note these are not ordinary SMD, its bigger size LED. It should last better than the normal small SMD.

Bulk list:
1) C2KBAS2005
2) C2KBAS2005
3) davidke20
4)
5)

This post has been edited by davidke20: Jan 15 2013, 11:59 PM

Your Persoga is old model or LED model? If LED no need to mod liao. According to ZEN, can't change voltage or ECU will confuse thing got shock circuit

I dunno, mind me dissect your car or not?

In case those who missed this video previously

And by the way, yesterday someone was talking about FLX topped out at 150kmh, and here's SOMEONE at the attempt of 200kmh

3MAX factory lunch TT, anyone

Boringing sendiri @ opposite of 3MAX factory sent Shawie for checkup. Fuel indicator rosak kot, won't cum down very scary. 400km still got 2 bars left

just got out from clinic Shawie, Willia said the fuel indicator no rosak, engine rosak. Too seb petrol, need to repair it back will take 1 full day! 9:30am send car, 7pm take car wor Will have to consult Marhaihai when I make appointment to send in

U guys so mean! Pple car rosak u guys sumore make fun I hope u guys all engine rosak then my car is currently running on AFO(air+fuel+oil mixture) that's why seb petrol lar need to take out the head & see where leak, intake manifold also need to cumout.

chester_85
Tofu beam problem. Anyway, send for alignment check & see whether camber ran out more than -1. If yes need to fix, cause by default Plotong set it up as -1 left & -1 right. And its supposed to looked like

/-----\

U can leave it run even camber is out, but the problem is your rear tayar will eat faster than usual. As for why Plotong set it as -1, that's bcoz for handling purpose. As & when u tarik corner, your rear wheel will have more tayar surface contact to the ground. If u hv more -ve value meaning better cornering handling. Previously my Shawie & GaGa both ran out of shape kaw-kaw. GaGa due to too much henbrek drift, until 1 side ran -4.5. Worst case I've heard is Marhaihai's BLM, ran -32.

I've sent both my Shawie & GaGa to repair rear camber, currently both cars both side set to -0.5. To save tayar rather than speed cornering.

Those who wish their engine rosak

Many possibilities. Could be head gasket, could be valve seat. Best to wish PCV sumbat, after clean will back to normal. Ofcoz worst case will be everything happened the same time lor. As zeone suggested, nowadays quality so bad, god knows when ur car will rosak like mine I hope u guys all engine rosak & seb petrol like mine

chester_85

Can be fix no need to change, but troublesome. I sent mine to fixed at Jln Bukit Kemuning Toyo Tyre Teoh Brothers. Change tofu beam will cost a bomb. Tofu beam alone cost RM1150, u think about it first la

iska

Tofu beam alenmen not same as macpherson. Need to dismantle whole rear brakes to do in other word, more expansib than normal alenmen

Chester_85

Tofu beam not cover under warranty, wear & tear item

This post has been edited by davidke20: Jan 16 2013, 03:31 PM

Engine rosak community

cum lar, u will like it geh




500km/tank no plobrem

Engine rosak fuel seb bulk:
1) dared
2) iska
3) r3apers
4) gpmm
5)
6)
7)
8)
9)
10)

Hurry! While stock last

This post has been edited by davidke20: Jan 16 2013, 03:37 PM

Refer to pointer 8. That's where exactly the experienced tyre shop need to fix. They'll have to unload the brake hub, add washer to the top mounting space so your tyres can be straight. In order to make sure washer added doesn't cause your camber outward(+ve value), each washer goes in will have to put back everything and check alignment again. If still off, will have to unload everything and redo adding washer until it's straight. Therefore it's slightly more expansive. However, some shop willing to do at decent price. As for the shop I've recommended, they charge RM130 if not mistaken. Going up and down from the machine, taking off brake hubs like 10 times. I see ady also think well worth the money I've spent.

In bulk list ady

This post has been edited by davidke20: Jan 16 2013, 03:48 PM

Thanks for the effort

see whether your tank of petrol can last until 450km

Glad u understand mang. Despite not major issue, but still felt butthurt. Anyway, next week when I send Gabby for repair, will start March project at Marhaihai. If got time do drop by

Bless you to have 600km/tank then

Sorry to hear that too. Sounds more expansib than mine If not worth repair ma change to 4G93 full transplant lor. Or 4G63T anywya, my boss sent his Wigra 1.5 semi overhaul his 3AT for RM250 oni. So, if need be I go ask for contact

It WAS rosak, now fixed jor

http://www.fuelly.com/driver/lhwj/saga