hi, when i tried to set my external hard disk to media server, the media server status remained in "idle".

Is it normal?

And i yet to see the media server available.

do i need to wait for days until the indexing is done?

yes, connecting the USB at router using AiDisk.

Scanning now.

guess it is indexing as well.
but how long normally it takes to do so?
it's been hours.

no idea why in my case it's taking so long.

i am using ORICO SATA to USB3.0 HDD Enclosure High Speed 5Gpbs Transparent 3.5 inch Hard Disk Case
https://shopee.com.my/product/113963244/6303442075

Plus WD purple 2TB sata 3.5" hard drive.

after i set the media server again. it will take hours until it show up.

is it because i used a 5400rpm hard drive?

no, only bought 1 HDD.

nowaday using laptop, no more invest in Sata HDD.

when the HDD go to sleep, do you able to wake it up?

This post has been edited by wailing81: Nov 29 2020, 09:55 AM

i left it overnight.

however the USB seem like gone in the morning.
i need to repower the casing to get it work again.

don't know what faulty is this now

i am ok with my previous portable seagate HDD.

Do a health scan and get the following. what should i do? reformat the HDD?

Checking cluster allocation bitmap ...
Cluster accounting failed at 102692610 - 102692612 (0x61ef702 - 0x61ef704): 3 missing cluster in $Bitmap
Cluster accounting failed at 104062681 - 104062683 (0x633ded9 - 0x633dedb): 3 missing cluster in $Bitmap
Cluster accounting failed at 104062732 - 104062733 (0x633df0c - 0x633df0d): 2 missing cluster in $Bitmap
Cluster accounting failed at 104062748 - 104062753 (0x633df1c - 0x633df21): 6 missing cluster in $Bitmap
Cluster accounting failed at 107526123 - 107526127 (0x668b7eb - 0x668b7ef): 5 missing cluster in $Bitmap
Cluster accounting failed at 107526139 - 107526155 (0x668b7fb - 0x668b80b): 17 missing cluster in $Bitmap
Cluster accounting failed at 107526171 - 107526188 (0x668b81b - 0x668b82c): 18 missing cluster in $Bitmap
Cluster accounting failed at 107526203 - 107526220 (0x668b83b - 0x668b84c): 18 missing cluster in $Bitmap
Cluster accounting failed at 107526236 - 108207848 (0x668b85c - 0x6731ee8): 681613 missing cluster in $Bitmap
Cluster accounting failed at 108207864 - 108207880 (0x6731ef8 - 0x6731f08): 17 missing cluster in $Bitmap
Cluster accounting failed at 108207896 - 108207912 (0x6731f18 - 0x6731f28): 17 missing cluster in $Bitmap
Cluster accounting failed at 108207928 - 108207944 (0x6731f38 - 0x6731f48): 17 missing cluster in $Bitmap
Cluster accounting failed at 108207960 - 109029149 (0x6731f58 - 0x67fa71d): 821190 missing cluster in $Bitmap
Cluster accounting failed at 109029165 - 109029181 (0x67fa72d - 0x67fa73d): 17 missing cluster in $Bitmap

ya, will try to investigate the HDD more first..

might just do a deep format again.

doing a throughout format now..
took quite long time for that.

probably i just quick format the new HDD and quickly insert movie into it.
will try after format done.

i had been told to update firmware then do factory reset..

oh, i had the same issue. but never suspect it was due to this ax3000. thanks for the information.
occasionally will disconnect.

hi @asus, if i bought a new asus router, can the new asus router read and use back the old setting.CFG from my old asus router? or i need to reset everything again one bye one?

previously i had same issue with cat7 cable bought online. I rotated the connection, then it's back to 1gbps.

pulled the trigger, even without the 3k coins.


This post has been edited by wailing81: Oct 10 2023, 03:49 PM

seem like the seller keep re-stock. it's 10 now.

mine also just arrived.