This stuff fell into my wiper water tank, they charge me RM30 to take this out since they have to take apart the front bumper to remove the tank.



Moral of the story, be careful when refiling your wiper water tank and try not to let anything fall inside.

[/quote]

Wow bro..how did that big piece fall into ur tank man...haha..glad it came bak out or not sumbat kaokao..

What rims are u using bro? Standard Stock? Well 1st time i have seen people change 2 tyres at a time..if they do also is when its same dimension....well no harm but well logically u ride will be heavier and not that balance..and if u are using stock rims then it will look like "Donut"...haha but thats not the main issue...stock rims cant really handle 205...the Width of it wont hold it as stable so when even u change it wider it wont help in stability...rubber are flexible and the rims are to hold them in place yea?..in ur case the front set is lighter and will be dragging a heavet set at the rear...dats if u proceed..thats my opinion...no offence ya...if u did it already do drop the feedback here...i also wana know...=)

This post has been edited by takeshiru: Jul 9 2013, 01:22 AM

Go back to honda bro...it means there is something wrong with the eletrical current...not a good sign..

haha bro..nice man... im using City S-spec year 2010...max i did go is 160++km/h...maybe i need a heavier foot..

I assuming your small device is E-manage or Throtther controller?....if not those then let me know wat "demon" you got to offer!

This post has been edited by takeshiru: Jul 18 2013, 08:30 PM

Agreed ..had most UR bars for CIty09 installed also...worth it..u will definitely love it...but the feel is very rigit...so if u wan comfort then not advisable...

One thing about CITY's UR rear anti roll bar is that they dont have bush joints so your car will be rigit and when on bunpy roads your Plank B will make noise...then u have to go honda service center to adjust it..that was the issue i went tru...but i changed my UR arb 16mm to a Taiwan brand...got bush joint so ride more comfortable and its 25mm...Cun babe.....expensive but i think its worth it...

just my 2 cent...

This post has been edited by takeshiru: Jul 18 2013, 08:31 PM

Why not complain bro?

Brembo max? Or BBK? Haha pads that you are using also a factor...oem ones should not make so many noise...try changing to organic non asbestos base pads...

Hmm...sure bro...u can do that too...for me certain stuff i will try leaving it to honda...even tho warranty expired d...
Rat bitings? Where u park bro...the only reason why electronic or bulbs wear faster is due to in consistant voltage...

The brand is SUMMIT...the guy sold to me said the better upgrade u can get from this brand is the rear ARB...others same same only....i went crazy wana change all to summit...but not so much option...heard that for CRZ they have lots for them....so unfair..LOL cant say much afterall CRZ is a "track" car in japan....

Well bro the brand is hard to come by...got lucky only...try sticking to Rear antiroll bar by UR but dont go over 16mm unless you don't have sensitive ears like me who can hear any freaking vibration of the car...

thats just my experience...maybe different batch cars got different outcomes...

Yea man...now is the BEST time to get a new Car....most manufacture are slashing their prices.....

haha bro...got noise also i will use it...just wana upgrade....actually fixed the piller B before i change to summit...did solve the problem...i got all those noise figure out after installing new ARB...haha...

By the way bro...the foreman said its cracking noise...like an old chair when sat on..

Damn man...rattling noise still there?...go to a random workshop and ask them wats that noise la...maybe they know...

This post has been edited by takeshiru: Jul 20 2013, 07:31 PM

Just send it to honda...they will confirm settle it for u...yea i know its troublesome because need to leave car a few days...no choice..me also same...naik taxi balik...hahah

Duk duk? Absorber mounting?

Go for a new one...new city got 5 yrs warranty....better...i got mine for the same price the guy offer u..but too bad that was a year ago...if i knew i would go for the new one...2nd hand interest rate is very high too compare to new one...about 4% to new that goes about 2-3%?

haha bro...seems like we are on the same boat...S spec eh?....do let me know where u got the mirrors done too...but i heard its damn expensive...need to change the control panel at the driver side and it rewire...lots of thing need to be done....

go tyre shop and ask the tyre people...haha they know best then u can decide which brand and Spec u wan based on your budget....tyre heaven!!

just a word of reminder that now JPJ are going hard on wide rims.....u know la those type of rims which the trend now..."hella Flush"....no comfort and stability..LOL...funny why those guys go down that road for style...u screw up ur arm and bearings.....then kene tangkap lagi...

Tyre and rims are not suppose to be more than the body fender...thats the rule now...so just beware when getting new rims...

Stock rims even though its 16inch but the width is not the same as the sport rims u get outside...mine is 16inch 7jj....can use 205/50/16r....for stock 16inch cant go to that tyre width...if u force it...1st no benefit...2nd looks like donut...

This post has been edited by takeshiru: Jul 23 2013, 01:23 AM

yea its true i guess....well i dono whats the OEM rims JJ coz i got the car 2nd hand from my bro in law and he changed to 17inch...and when i got it i changed it back to 16inch...cheaper tyre and got a better brand...

Nope no mods needed...everything looks fine....no problem or whatsoever...increase in stability and handling is a definitely YES...form what i see is that For City the max u can go without jeopardizing the bearing and etc is 7jj...more than that u need to do some mod to make it usable without problems like other do...early premature wear of bearing and arms....

however do bear in mind that when u increase the width u get more stability but tires are heavier and more tyre surface contact compare to oem.. and in that sense your FC wont be as good as what you used in Oem...slight increase...also depend on the rims and tyre profile u get....heavy rims or thicker tire profile increase FC and vise versa... have to give and take...choice is up to u....


This post has been edited by takeshiru: Jul 23 2013, 11:54 PM

bro...go for tint and security tint 2in1...lumar...haha if got the budget...didnt do the security tint last time now cannot do it anymore as it needs to be directly on the glass...3M seems okie...

Haha same shoe bro....DAMN!!!!!

Did anyone tried engine decarbonisation before?....its different then engine flush right?....apparently it works like a charm restoring your power and FC to as when you got the car...

By the way you guys know who i can contact to get AUTOFOAM for a good price..i remember someone mentioning a guy in LYN that can offer a good price..

This post has been edited by takeshiru: Sep 25 2013, 08:18 AM

Hey guys...anyone interested in parts for honda city 5G?....im planning to demode my car...will consider another car soon so im starting to sell off performance parts...If interested do Pm me...

Parts are

1) Hot InaZma Hyper + hot grounding Cables...
2) Qmax Photo Conductor 2+1..\
3) Ultra Racing parts..