Get an Dual USB router to try

btw, wat modem were u using before this and how high you can DL with the use of antenna ?

are you using antenna with this E398?

thanks

OK people, just got the modem from blacktubi.
Sitting downstairs, no open windows and no external antennas



Tested in Puchong, will test again when I'm in Penang next month lol.

For single modem, maximum speed using E372 with antenna was 5-7Mbps. Now, E398 with dual antenna, it's the result you see in my earlier post. Note that I have to use antenna in my area due to lousy signal (<10-20%).

On another note, I'm using two 3G routers for the load balancing via ZeroShell. With multiple E398s, I'll need to find a cheaper solution to address my antenna issue. Still trying to source around for some RP-SMA splitters. Blacktubi, if you come across any, please let me know.

---

Added on December 12, 2012, 3:55 pmNice speed!! How I wish I can get the same as well.

This post has been edited by maxcheam: Dec 12 2012, 03:55 PM

Buy another Panel, kautim

btw, any iPhone users here, i got a Msg from maxis that there is an update for my Network (my iP is a Maxis set)

wat could that mean? Network Settings Update ? better speed ~ no rite ?

item received.....

i have planning to use 2 x E398 leh, buy 4 panels ar?

Didn't get any message from Maxis. my ip also from Maxis.

SMA Splitter



btw, how you setup the 2 routers ?

care to tell and can use different routers?

I already mentioned SMA splitter earlier mar.. you asked me to buy additional panel antenna pulak.

For the 2 routers, I mentioned before also:
http://forum.lowyat.net/index.php?showtopi...post&p=56044174

can use any 3G routers.

What i meant was SMA splitter is a good choice since you are using 2# E398

From the previous drawings, 2# 3G routers will dial in and how will these 2 connection connect to the PC as it only have one wifi adaptor and one RJ45 ?

use both , then use the SW in the PC to do load balancing ?

why dun you buy a load balancer ( Hardware )

looks like we're hijacking blacktubi's sales thread.

One RJ45/WiFi is good enough to connect the 2 routers as they are on the same subnet. Eg (simplified version of what I have):
Router #1 - 192.168.1.251
Router #2 - 192.168.1.252
Zeroshell WiFi - 192.168.1.250 (NAT will be enabled here)
Zeroshell RJ45 - 192.168.2.250
Other clients in the house - 192.168.2.0/24

I don't want to spend extra money to buy additional hardware since the software can handle basically the same thing with the same or more features. Plus it's FREE!

CLEVER CLEVER

just paid.should receive tomorrow but pay late , will get friday

Tomato firmware got native 3G ability but not compatible with many router
Else it is a very good firmware for beginner

SMA splitter indeed got stuff like this
But seriously speaking, I not sure it works or not

---

Added on
Thanks for the feedback from everyone

Appreciated

pm me best price

pm best price too. tq

Item received br0. tested it and speed is increase alot. Usual its 3-5mb. Thx br0

pm me best price..

hi,.. pls pm me best price. thx

Item received..

Nice nice.

Everybody received their E398, i still waiting...............

Waiting to pay him,