Tp LInk TL-MR3420 Owner CLub V2
|
|
 Nov 22 2012, 09:51 PM
Return to original view | Post
#21
|
 
Senior Member
3,158 posts Joined: Apr 2005 From: -Butterworth, Penang-   
|
Ok... Now seem solve my problem!
I using usb extension to move away my modem from the router.. Now speed back to minimum 8mbps ... I suspect the wifi signal interfere the 3g signal.... Will monitor 1 more day for the result This post has been edited by stevenlee: Nov 22 2012, 09:52 PM |
|
|
|
|
|
Nov 22 2012, 10:01 PM
Return to original view | Post
#22
|
|
Senior Member
3,158 posts Joined: Apr 2005 From: -Butterworth, Penang-
|
QUOTE(chuahcs79 @ Nov 22 2012, 09:53 PM) best just plug your zte mf680 directly into router and move together with the router to best spot,.. bro,router + modem need good fenshui too  wifi speed & ping is sometimes lower than lan cable connection plus wifi have more interferences  no it doesnt work.... same spot modem + router = speed suck same spot as before but 3g modem remain same spot and move away my router....speed bump up... i duno why  might be the wifi signal and 3g signal interference problem i suspected.... Added on November 22, 2012, 10:08 pmi already ask digilife test my previous TD8968 modem as he also get crappy result...i ask him to use usb extension to move away the router while 3g modem remain same spot.. if result boast up...then i suspect signal interference problem... This post has been edited by stevenlee: Nov 22 2012, 10:08 PM |
|
|
Nov 23 2012, 07:05 AM
Return to original view | Post
#23
|
|
Senior Member
3,158 posts Joined: Apr 2005 From: -Butterworth, Penang-
|
somehow i still ok with below speed after using usb extension
speed double compare to direct plug in to router    This post has been edited by stevenlee: Nov 23 2012, 07:08 AM |
|
|
Nov 24 2012, 07:18 PM
Return to original view | Post
#24
|
|
Senior Member
3,158 posts Joined: Apr 2005 From: -Butterworth, Penang-
|
QUOTE(digilife @ Nov 24 2012, 09:04 AM) the Active Connections increased so much after 9am not sure what it is...[attachmentid=3171957] now 10.27am, lagi banyak [attachmentid=3171993]  last time i use this DDWRT on my 3020 i did not even pay attention on this  it look like it can detect how many connection connected to a tower  but i not sure it is detect total connection to the tower... by the way..DDWRT is more user friendly compare to open wrt.. i still looking for DDWRT support for my TL 3420  |
|
|
Nov 26 2012, 07:36 AM
Return to original view | Post
#25
|
|
Senior Member
3,158 posts Joined: Apr 2005 From: -Butterworth, Penang-
|
QUOTE(EnegueWeil @ Nov 26 2012, 01:04 AM) nvm lah, still getting 3mbps after restating 3 times~ ><! give up d~ have u try move away the 3g modem from the router?thanks tho~ D: use usb extension and move away the 3g from the router.. dont too long the usb extension, roughly 1 meter is enough..and test it out  i face same problem like you, after i use usb extension move away the 3g modem..my speed went up to 5mbps stable This post has been edited by stevenlee: Nov 26 2012, 07:37 AM |
|
|
Nov 29 2012, 07:02 AM
Return to original view | Post
#26
|
|
Senior Member
3,158 posts Joined: Apr 2005 From: -Butterworth, Penang-
|
chuahcs,
if upgrading the openwrt firmware from old openwrt...do i need to install the package again? |
|
|
Nov 29 2012, 04:00 PM
Return to original view | Post
#27
|
|
Senior Member
3,158 posts Joined: Apr 2005 From: -Butterworth, Penang-
|
QUOTE(chuahcs79 @ Nov 29 2012, 03:40 PM) my ZTE MF680 already wrongly flash to swedish firmware under 3 last time so no more purple LED, only blue Led all the way chuahcs make sure the lan cable plug in yellow lan port in first router and plug lan cable in blue lan port in second router then u go to second router GUI sign in and select DHCP Protocol ( in openwrt ) or Wan only ( in stock firmware ) then open another Tab window sign in first router Gui, due to V1 = 192.168.1.1 & V2 = 192.168.0.1 then both can combine  Added on November 29, 2012, 3:44 pm yes packages always need to re install after flashing/upgrade done the link at first post is old firmware right? not the AA RC1 right? |
|
|
Dec 1 2012, 09:22 AM
Return to original view | Post
#28
|
|
Senior Member
3,158 posts Joined: Apr 2005 From: -Butterworth, Penang-
|
with latest AA firmware...my 3gmodem can direct plug in to the router usb and getting 5mbps at average compare to previous openwrt firmware..
i think they might have fix the signal issue in thier beta firmware... |
|
Topic ClosedOptions
|
| Change to: |  0.0313sec
 0.44
 7 queries
 GZIP Disabled
Time is now: 8th December 2025 - 09:40 AM |
Quote