Puchong SC.. they will do only when u ask for it.. even when ur car chassis number is affected (based on service bulletin) 
done serviced my abby for 10k yesterday... things that i complained: -
1. seat "krekk krekk" at backrest - they only apply grease, summore saying that other preve also the same..
2. RH wiper touching body frame - adjusted.
3. headlamp settings - adjusted
4. power window switch sometimes malfunction on driver power window only - they only reaffix the socket only, last time reaffix socket still the same..
5. air-cond whistling sound when in medium speed - they say campro engine air-cond will always got that whistling sound??? do nothing..

forgot about the ECU remapping until 1 hour later then telling him to do it.. if not, they simply just keep quiet only.. 

Bro, what pants you wear to work sampai driver seat berbulu eh?  

Anyway, the seat quality of Preve is not really good.

I just went for 3rd 10k service few days ago, used Shell helix ultra 5w40 fully synthetic. FYI, most SC dun have the 5w30/5w40, must check with SC or bring your own engine oil before go to service. Have ur car update the latest ECU/TCU?

I also whack the engine 160km/h before 1k service, top speed 180km/h....hope not getting any summon 

mat79 contribution on the driver seat could be useful, it could be that due to cost cutting measure, Leather Seat or premium seat are sacrificed.....

Someone said got update at Puchong SC but i checked with COSE, the SA told me no such update le 

As they said, "be careful of what u wish for.." Ahahaha

Me as well actually.. hehe.. Touchwood nothing will catch my White Knight in the cam! hehe

So far what I observed after ECU/TCU updated:
- stop at D mode around 1000rpm
- feel no more jerking at 10-20km/h low speed
- engine now very responsive like inspira and vios, have to adapt to it again, feel too fast hard to brake
- FC dun know yet
myeg not update their system on time...may be once a week.
Touchwood also hehe

can go for Eneos 5-30? it selling RM105 at some spare part shop...
i guess it should better than Petronas semi sync if the Eneos's oil groups higher than Petronas...
bcos no matter mineral, semi syc or fully syc category, there have have the oil groups for different category...
we even can get fully syc around RM120-RM150 easily, but oil groups are questionable...
i considering to wrap a leather seat instead... maybe go for PU leather instead for better protection...
anyone wrapped the preve seat yet so far?

Haiyo you guys ar...when sluggish complen sluggish, now got new tuning for more power, worried FC also 

Me never complaint as well. Just really afraid it will cap the top speed as sometime i do travel from KL to Terengganu..

He already got the 'conti' force    with him stargate, its Ford Fiesta btw. hehehe

side air bag inside the front seat?
doubt can do the wrapping as the fabric must fragile enough to break...

anyones preve has blinking headlights occasionally?

sometimes my car will 'kelip-kelip' -.-"

actually i thinking wrap without remove the original fabric, just simply "plug and play" with leather cover... is it possible?

I'm a bit confused by the power window recall. When I read the bulletin, it says .. "Symptom - 1. Possible malfunction Front LH, Rear LH, Rear RH power window assembly."

By my understanding, 'possible' doesn't make it a mandatory recall. So, if it ain't broken, why fix it? Furthermore, their suggested recourse/fix is to simply apply grease to the coil spring to eliminate/diminish power window 'klak klak' noise during operation caused by the rubbing of the coil spring. No mention of replacing the motor unit. Also no mention of the driver's door bulging outwards.

when will a special edition be released for preve?

Haha.. LOL..

Of course it shouldn't. But u can always try ask the SC next time whether they are able to adjust that.
IMHO If the PnP one got side explode-able stitch sure, why not.
Uiks, thought the c pillar wind noise is a known issue and they have instructed SC to replace the rubber strip edy?

  thanks

My driver side power window motor was quite powerful when the car was new. Not long after that, I started getting the rubber 'ketat' symptom leading to 'klak klak' sound when winding the window midway up. That was easily fixed with a quick spray of silicon lube but motor is no longer as powerful as it once was. I can live with that so long as window 'janji' to go all the way up.
Bulletin did mention it only affects chassis numbers ranging from 274 to 11391. Then again, if the windows for the 2nd batch aren't misbehaving, why would anyone require to have that looked into? As for me, I'm not comfortable with the unnecessary stripping of my doors' trimmings.

Btw, car is indeed more responsive after ecu/tcu remap. Don't be expecting a huge improvement but the change is noticeable. I strongly recommend those that haven't done it yet to head towards the SC to make their appointments. The upgrade is free and it takes approximately an hour to do so. Did mine at SC Cheras behind Connaught.

If problem persist after applying silicon lube, then I recommend a visit to nearest SC (in your case, the Cheras SC behind Connaught). No need to go all the way to COSE and waste an entire day waiting there.

Huhuhu.. Damn..

Unless it's like this ar?