In WRT54GL WDS key in the BEFW11S4 wireless MAC address. Both set to the same wireless channel & test it out without any WEP encryptions. If i remember correctly it won't work with WEP/WPA encryptions. That is the reason i sold my old BEFW11S4 & got my self the WRT54GSv4.

unnamed, DD-WRT support pptp server & client, OpenVPN server & client running in the Linksys WRT54G/GL/GS router. I am using the pptp server in my clients office network so that i can access & trouble shoot the LAN PC from any location that has internet connection. The best is use the OpenVPN , the speed is faster compare to PPTP server.

This post has been edited by ldragon: Jan 31 2007, 06:22 PM

scorps, signal for WRT54G, GL, GS all are the same. WRT300N have 20% stronger signal compare to that 3 units. I owned one model each

MX510, P2P with Protocol encryption will not work for DD-WRT.

honkit, try the 30 sec reset. Hold the reset button & power up the router wait for 30sec then release the reset. Hope this can fix your router.

Any one have WRT54GL for sale?

Welcome to the club goolias,

Just want to share this patch with DD-WRT users.
Mystery reset to defaults out of no-where!
Patch is available : release 0.5
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=74532#74532

This is my setting:
Global maximum number of connections: 300
Maximum number of connected peers per torrent: 50
Number of upload slot per torrent: 4

Downloading 6 torrent @ 80KB/s (QoS) Active connection = <400

Check your DD-WRT setting:
Maximum Port : 4096
TCP & UDP Timeout = either 120 or 90

need more RAM? look for WRT300N or WRT350N

WRT54G v5 can ref to this URL , upgrade guides.
http://www.scorpiontek.org/portal/content/view/27/36/

If you switch off the linksys. Do not turn it on immediately (coz of error checking & it will revert to default settings). Switch on after 30 - 60 sec.
If you are brave enough, you can try this patch:
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=74532#74532

I have been using this patch for quite sometime, solved most of the problem (power tripped, switch on too fast..etc)

azmihamzah,
Sri Computers (Lowyat)
Buffalo WHR-G54S (same spec as WRT54GLv1.1)=RM170
Buffalo WHR-HP-G54 (same spec as WRT54GSv4)= RM220
The best part is it came with wall mount, the antenna is using RP-SMA connector!! ideal for high gain antenna upgrade & it's powered on DV 5v 2.6A only!!

chiafoo
I have tested the WHR-G54S & WHR-HP-G54 both are very good device & easy to upgrade to DD-WRT. Recommended to use DD-WRTv23SP2 Generic Standard
Installation guide:
http://www.dd-wrt.com/wiki/index.php/Insta...54_and_WHR-G125

This post has been edited by ldragon: Jul 29 2007, 12:36 AM

Eithanius , i flash the WRT54Gv5 b4.
Read & understand the instruction:
http://www.bitsum.com/openwiking/owbase/ow.asp?WRT54G5%5FCFE

riku2replica, no worry, what u can do is sell it off in Garage Sale Section

azmihamzah,
I bought a few units last Sat (Sri Computer @ Lowyat). They still have a lot of stocks.
"Better firmware"? pass a copy to me.

Update:
Today i bought another 2 units.
WHR-G54S = RM160.00
WHR-HP-G54 = RM210.00
They still have plenty of stocks.

This post has been edited by ldragon: Aug 2 2007, 10:07 PM

azmihamzah,
lolz, router eater? i am a hotspot installer

i am using Squid, PublicIP, CoovAP, smoothwall, sometime using the 64-BIT WEP

WOW!! Great bargain!!!

gsan, the Buffalo wireless signal is better than Linksys.

azmihamzah,
WHR-HP-G54 & WHR-G54S = 200MHz & 16MB Flash Memory

Signal from the Buffalo Router is far superior compare to Linksys WRT54GL

I am testing if from my computer room which is in the middle of the house. Buffalo signal is very strong on transmit & receive. If i using linksys, totally no signal or i have to add in a WDS unit in order to get the signal.

This post has been edited by ldragon: Sep 8 2007, 10:36 PM