The DDR2 make this card faster than the 9550 with DDR. And of course, the higher memory clock speed.

hahah how much is that?

maybe i'll be selling my 9550 to someone else and spend a lil cash to get a new one..

my 9550 is only 3 months old... bought from Compuzone.

i bought it for RM335 from forumer storm88's bulk. AFAIK he doesnt sell them anymore... now only PCIE cards.

but if u wanna buy a good 9550 that the GeCube 9550 Extreme Edition is the way to go.

but if u can find the Grandmars 9550 Infinite even better.

but i suggest u get a 6200 128bit. make sure its 128bit. its better than the 9550. once again..make sure its 128bit. coz the 64bit versions are crap....9550 can easily spank the 64bit 6200

hmm.. madman,,,

i'm planning to get myself a zalman VF700-cu to see if it can go further....

i check modernopc.com , they are out of Vf700-cu already.... i think fatality is a lilttle expensive... they are left with vf-700-cu-LED 9Extra 10 bucks for the LED which i don't need.......

PROs and SIFUS..... if i purchase Zalman vf-700 , do you all think i can achieve

410/260(CORE/MEM=520mhz) on stock voltage?


what do you think?

..

i don't think 6200 can.. because out of my budget..

the reason i opted for normal 9550 is because i'm VERY very tight on budget...

and my parents REfuse to give me more money to upgrade my GC.,.,....

previously i was only using a gf2mx for 4 years....................

i want to squeeze every bit i can from my 9550.......

maybe i'll let shah81 do vmod on it..

This post has been edited by fillet: Feb 24 2006, 05:18 PM

yeah.... go for the voltmod and also go for the vf700cu from moderno...dun care ler led or not... its the only place u can get it for now. its a good cooler....but better check ur card compatible or not at zalmans website.

voltmod + zamman v7700cu =

i myself got the fatality fits perfectly on my card

CSS at

1024 X 768

GOT ARTIFACT./..

300/240(CORE/MEM=480)
where to find the compatibility??



i only see ATI radeon 9XXX series... but never specify??

This post has been edited by fillet: Feb 24 2006, 07:47 PM

if you thing you are able to do the mods yourself, just post the picture of your card like i told you and i'll try to pin-point where to mod

thx shah81...


i have the tools... but no knowledge... lol


BTW.. what are the differences between a VF700, and a fatality(difference of RM35 you know!!!!)?

is the pic good enough?? or the FLASH reflection is bothering?

This post has been edited by fillet: Feb 24 2006, 08:15 PM

oooohh....black PCB...nice

anyway...fatality is slightly 'bigger' (forgot the term liao) and the fan spins faster oso than the VF700

EDIT: im pretty sure shah will ask u to take pix again....coz i oso cannot see hehheh

best to meet up with him or send him ur card..dun worry...he can be trusted

This post has been edited by mADmAN: Feb 24 2006, 09:04 PM

studying the pictures right now....i more request, take a picture with the heatsink off

edit: already seen a spot for gpu core mod but need a pic without the heatsink to be sure. the mem mod is some what tricky....maybe better if you send me the card.

This post has been edited by Shah81: Feb 24 2006, 09:24 PM

hmm.... the HSF plastic pin wasn't design that well.... it's not easy to push it thorugh the hole....

i tried to get it out... but very difficult.. i'm afraid i'll have to break the two plastic pins to get the HSF out..

BTW ...

if i order from moderna using CC, how long ah the stuff will be delivered>??

i have a big problem...

i check my PSU...

i've used up all the connectors!!!.....

1 for dvd

1 for cd

1 for HDD1

1 for HDD2


i'm left weith none... even if i get VF700 or fatal1ty... i won't have enough connector to power up the FAN

This post has been edited by fillet: Feb 24 2006, 09:27 PM

CC??? i dunno if moderno accepts credit card man...best u check with him....

but usually if he has stock ull get in 2 or 3 days depending on when he ships out and when poslaju feeling rajin

if u can COD with him might as well go and COD with him....hes in subang.

my fatality i COD with him.... he responds quite fast

fillet....where u located dude?

EDIT: DO NOT break the pins man...u might need it later on... sure can take out one and its not tricky.... those pins are very common....

use a 'playar muncung tirus'...cover it with a piece of cloth.....clip on the pins on the back of the card and push it out...gently...

This post has been edited by mADmAN: Feb 24 2006, 09:28 PM

i am living in tmn midah..

i cannot COD.... lol.... don't have so much CASH in hand..... and i cannot find a CITIbank ATM where i can withdraw cash with the CC

tmn midah?? is that in cheras? shah oso in cheras, i think near bdr tun razak...i think...i damn bad in cheras one...hehhee...go meet up with the feller la... and if u guys meet up.....

NAK IKUT!!!!!

BDR tun razak??

beside tmn midah only loh.. jhahahhahaha


BTW... COD?? i can go subang.. no problem.. but does he have retail outlet or something??

if he has, i hope he accepts CC... hahha

This post has been edited by fillet: Feb 24 2006, 09:31 PM

no he doesnt....at least not that i know of.... met him up in subang once and in asiajaya PJ once (he wa on his way to kepong)

try PM him and see if he accepts CC or not.... and citibank atm only got in jln ampang laaaaaaaaaaaa

hahaha... Jalan AMpang ah? near the HQ??


BTW...

MADMAN.. my PSU got not enough connector for the ZALMAN fan... lol.. no hope of adding in vf700

the zalman comes with a 3pin connector and a molex multi-connector...

u can use the 3-pin to plug into ur mobo. is still no space....

can get a Y-splitter oso.

and citibank jln ampang isnt near the HQ....it IS the HQ

This post has been edited by mADmAN: Feb 24 2006, 09:41 PM

yo fillet...send your psu to me.....i'll add extra molex to it...
btw i'm staying at Tmn Desa Baiduri...very close to Plaza Phoenix.



see that 8 legged IC in the yellow square?? give me the markings on the chip. other instructions will follow.

This post has been edited by Shah81: Feb 24 2006, 10:02 PM

oh the marking ah.. hahha lucky i got hi res picture with me
?


i think gettting a y-splitter is easier... anywhere selling this?

This post has been edited by fillet: Feb 25 2006, 11:11 AM