no problem here

i will do a full review of zte mf680 + panel + ts-9 when it arrive on monday.

---

Added on November 10, 2012, 9:46 pmMaxis is fine tonight though



This post has been edited by chuahcs79: Nov 10 2012, 09:46 PM

bro chuahcs, seem really happy to receive the item and poisoning people here, hehe

---

Added on November 10, 2012, 10:30 pmHey is this consider good? Huawei E172



direct plug -93 dbm

This post has been edited by wavezard: Nov 10 2012, 10:30 PM

just wated to share on those tips to improve your wireless broadband connection & how to make it stable and consistent as wired broadband,..

How to used this sim inside smart phone?

can some1 tell me setting?

anyone can share the mdma with me?
seem like the download link inside the webpage at the 1st page is no longer valid alr.

For Android

Settings > Mobile Network > Access Point Name

Create a new one
APN unet
USERNAME maxis
PASSWORD wap

---

Added on November 10, 2012, 11:05 pmhttp://www.mediafire.com/?5z935dmlgd4qiez

This post has been edited by blacktubi: Nov 10 2012, 11:05 PM

Thanks blacktubi

thanks bro....

different only no access number rite..

here is the current small experiment i am doing and researching

ZTE MF680
[attachmentid=3149623]

E372 Maxis set
[attachmentid=3149624]

Those line is highlight is one of the internal Signal antenna attach to the cover,

See that E372 have much longer zig zag silver than ZTE MF680 which have only tiny bit ?


ZTE MF680
[attachmentid=3149628]

E372
[attachmentid=3149629]


As you can see from 2 photo above, see how the heatsink in ZTE MF680 is 2 divide piece and E372 is one whole big long piece of heatsink ?
This is the main reason why you guys feel ZTE MF680 is hotter than E372 because the heatsink too small compare to E372 can't hardly tame the whole heat , and the zte mf680 cover will get much more warm and need a cooling method or else performances is drop. on the other hand E372 doesn't need any cooling method and will still be fine and performances a lot better and much stable when heat raise,..


now you guys have the answer of why E372 is much stable and less heat in overall than ZTE MF680 & why ZTE MF680 performances drop tremendous when heat raise

i hope this post benefit you all who having these modem and also for you all who is choosing between which one to have,..

new experiment coming up ^^,
so stay tunes,

This post has been edited by chuahcs79: Nov 11 2012, 01:04 AM

so, need to change the heatsink? isnt e372 and mf689 covermade of plastic...why zte much hotter?

As you can see from 2 photo above, see how the heatsink in ZTE MF680 is 2 divide piece and E372 is one whole big long piece of heatsink ?
This is the main reason why you guys feel ZTE MF680 is hotter than E372 because the heatsink too small compare to E372 can't hardly tame the whole heat , and the zte mf680 cover will get much more warm and need a cooling method or else performances is drop. on the other hand E372 doesn't need any cooling method and will still be fine and performances a lot better and much stable when heat raise,..

just change the heatsink from zte?

how to u open up the MF680 ? by brute force ?

see here

---

Added on November 11, 2012, 1:28 ami try open the ZTE MF680 but the silver thing apart from the board, signal and speed drop tremendously,

so now i am working on new project,..

on shift the silver zig zag thing from my spoil E372 maxis set on to my ZTE MF680 board, and manually add more heatsink on the ZTE MF680 front heat sink part,..

then after will add TS-9 convertor and plug in Panel antenna as well

hopefully result is high speed + stable

This post has been edited by chuahcs79: Nov 11 2012, 01:28 AM

My so called " Death E372 Maxis Set" is ALIVE again

i open the both cover to take photo just now,

and then i leave the back cover close and plug in router tl-mr3420 v1 and insert sim card then plug in CRC9 convertor + panel,..

and my maxis set E372 is working amazing with this antenna + CRC9 convertor

and it is never switch to Auto band like my E372 huawei set , it is still on UMTS2100 with Full signal;


[attachmentid=3149689]
look at the signal 31,99 & ping

[attachmentid=3149690]
see the result ?

[attachmentid=3149691]
see the top piece broken from the board

[attachmentid=3149692]
the stable IDM speed between 1.35 ~ 1.45MB/s


This all result is amazing for a so called "Death Modem" WOW
the Maxis set is working amazingly with the back cover zig zag silver thing as second antenna and Panel antenna through the CRC9 convertor. even modem is broken and connect it together with external and internal antenna will still get it going,..

i plan to strip naked the MF680 once I have the Panel antenna later on..the internal antenna "silver thing" on the plastic cover is not dependent anymore right if using ext. antenna?

i dont have the TS-9 convertor yet, so i am not yet tested without the cover silver thing,

but for now i know if i take off the cover, signal & speed all drop

My speedtest at hometown (Sg.Petani) without any tweak


I wish my apartment (Bkt.Jambul) speed also like this

oo. u want to change the antenna and the heatsink...WOW, if it works, definetely u can do service or sell the
ZTE MF680 | Chuahcs Edition