QUOTE(zerohunter @ Sep 10 2012, 03:28 PM)
http://www.bit-tech.net/hardware/cases/201...e-600t-review/2check this
and this casing cant do a push and pull unless moded
This post has been edited by cloud8992: Sep 10 2012, 02:38 PM
[Official] Rig Suggestion Thread V1, Hardware Q&A RRG™
|
|
Sep 10 2012, 02:37 PM
|
![]() ![]()
Junior Member
139 posts Joined: Jan 2011 |
QUOTE(zerohunter @ Sep 10 2012, 03:28 PM) http://www.bit-tech.net/hardware/cases/201...e-600t-review/2check this and this casing cant do a push and pull unless moded This post has been edited by cloud8992: Sep 10 2012, 02:38 PM |
|
|
|
|
|
Sep 10 2012, 02:39 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,996 posts Joined: Apr 2008 From: Bolehland |
QUOTE(cloud8992 @ Sep 10 2012, 02:37 PM) http://www.bit-tech.net/hardware/cases/201...e-600t-review/2 only this?check this and this casing cant do a push and pull unless moded |
|
|
Sep 10 2012, 02:42 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,733 posts Joined: Jan 2012 |
QUOTE(cloud8992 @ Sep 10 2012, 02:37 PM) http://www.bit-tech.net/hardware/cases/201...e-600t-review/2 based on one comparison you make an assumption 600t not good for cooling ? Check out other reviews. Many of them give decent reviews bout this chassis. I don't think its that bad. Based on the other cooling performance of other chassis from the url you stated the 600t performs at average and is somewhat still okay ! check this and this casing cant do a push and pull unless moded |
|
|
Sep 10 2012, 02:43 PM
|
![]() ![]()
Junior Member
139 posts Joined: Jan 2011 |
even CyntrixTech said do so i believe its true ??
|
|
|
Sep 10 2012, 02:45 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,996 posts Joined: Apr 2008 From: Bolehland |
QUOTE(cloud8992 @ Sep 10 2012, 02:43 PM) then u should tell him all your requirement for the new rig, why bother asking here? not only he can give advice, he sell stuffs, he does overclcok, he does cable management, everything u want, everything u need This post has been edited by zerohunter: Sep 10 2012, 02:49 PM |
|
|
Sep 10 2012, 02:51 PM
|
![]() ![]()
Junior Member
139 posts Joined: Jan 2011 |
i am doing researches and see for everything casing mobo gpu and everything else and i want to know others opinion i cant just go buy blindly i want to know and make sure it true and i spends hours to look up. he seem giving good service and good feedback as well but still i would like to know for sure it is true that why asking .
|
|
|
|
|
|
Sep 10 2012, 03:00 PM
|
![]() ![]() ![]() ![]() ![]()
Senior Member
998 posts Joined: May 2009 From: Bangi & Kuala Terengganu |
QUOTE(cloud8992 @ Sep 10 2012, 03:51 PM) i am doing researches and see for everything casing mobo gpu and everything else and i want to know others opinion i cant just go buy blindly i want to know and make sure it true and i spends hours to look up. he seem giving good service and good feedback as well but still i would like to know for sure it is true that why asking . actually 600t quite good for wc..you can expand your research at OCN..lots of users there own 600t with wc..mostly with 240mm rad on top and 200mm rad in front. if your looking for 360mm rad, just buy nzxt switch or bitfenix shinobi xl. just my opinion though. |
|
|
Sep 10 2012, 03:14 PM
|
![]() ![]()
Junior Member
139 posts Joined: Jan 2011 |
thanks for you advice i do watch their video review and i get most info from .nzxt switch is good for both air cool and water cool but some say too much plastic and ugly design will try to see the real thing soon.the 600t i like it a lot but some thing just put me off i need the spend a lot to improve air flow which also make it more noisy.
|
|
|
Sep 10 2012, 03:22 PM
|
![]() ![]() ![]()
Senior Member
499 posts Joined: May 2012 From: Cheras, Kajang |
|
|
|
Sep 10 2012, 03:27 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,628 posts Joined: Mar 2008 From: Sitiawan |
IMO, any of those properly designed case would have decent airflow.
just pick the one that suits your budget, your future plan and aesthetics. btw, Cyntrix is experienced, he sure will clear your doubts if you tell him what you want, and what you don't want. maybe I've break out from that paranoid feeling of gaining that extra degree Celsius. Why make life so hard? lol This post has been edited by JohnDiew0107: Sep 10 2012, 03:28 PM |
|
|
Sep 10 2012, 03:40 PM
|
![]() ![]()
Junior Member
139 posts Joined: Jan 2011 |
thanks i am actually thinking about more on mobo +GPU
becasue Cyntrix keep telling me mobo doesnt matter you will max out oc with ivy.B before mobo take effect ?? gpu 670 reference or 680 reference ? i dont plan to upgrade it for a while until the price down like crazy so can afford sli XD. |
|
|
Sep 10 2012, 03:52 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,628 posts Joined: Mar 2008 From: Sitiawan |
QUOTE(cloud8992 @ Sep 10 2012, 03:40 PM) thanks i am actually thinking about more on mobo +GPU indeed, even P8Z77-M could OC ivyB nicely.becasue Cyntrix keep telling me mobo doesnt matter you will max out oc with ivy.B before mobo take effect ?? gpu 670 reference or 680 reference ? i dont plan to upgrade it for a while until the price down like crazy so can afford sli XD. though, I personally wouldn't recommend SLI route since not much game would really take the advantage of SLI, not to mention certain potential issues might occur because of SLI. by the way, even 670 could max out a lot of games ald. but if got moolah for 680, then I no comment |
|
|
Sep 10 2012, 04:01 PM
|
![]() ![]()
Junior Member
139 posts Joined: Jan 2011 |
ok thanks sticking with 670 XD .i dont want m-atx mobo becasue i plan on getting full tower so if will look out of place XD
|
|
|
|
|
|
Sep 10 2012, 04:04 PM
|
![]() ![]()
Junior Member
139 posts Joined: May 2009 |
want good looking board? can take
sabertooth m5f mpower sniper |
|
|
Sep 10 2012, 04:15 PM
|
![]() ![]()
Junior Member
139 posts Joined: Jan 2011 |
all 3 mobo indeed look great but need sponsor for that and love msi XD
|
|
|
Sep 10 2012, 04:17 PM
|
![]() ![]()
Junior Member
139 posts Joined: May 2009 |
|
|
|
Sep 10 2012, 04:30 PM
|
![]() ![]() ![]()
Junior Member
420 posts Joined: Sep 2012 |
I am planning to build a PC rig from the scratch and the desktop computer I would use as mid end gaming machine. But as for the budget, I still could not determined it as I planned on buying part per part because I don't have enough money to buy all the parts.
Maybe I will buy for example processor first (Intel core i5 3570 popped to mind), then motherboard and RAM, and graphic card would be last to buy. The period of this to be completed maybe around 5-6 months. What I need? Processor (prefer Intel i5 siries) Motherboard (any good motherboard with SLI capabilities) GPU (I don't know what suit for what I want but any good and money effective want would be appreciated) Casing PSU Monitor 20-23 inches Ram Mouse and keyboard (I want Razer brand) Any part missing? It's from scratch and I never build PC rig before but I want to try it with the guide maybe only here and the internet. I don't want suggestions from salesman. Actually I buy part per part by monthly for one or two part. Owh, the overall budget I hoped not exceeded RM3,500. And the games I played ranged from Bioshock, Dragon Age, Modern Warefare, HON, with sedap mata memandang setting. ANY SUGGESTION for me? This post has been edited by gruntz99: Sep 10 2012, 04:38 PM |
|
|
Sep 10 2012, 04:33 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,996 posts Joined: Apr 2008 From: Bolehland |
QUOTE(gruntz99 @ Sep 10 2012, 04:30 PM) I am planning to build a PC rig from the scratch and the desktop computer I would use as mid end gaming machine. But as for the budget, I still could not determined it as I planned on buying part per part because I don't have enough money to buy all the parts. the best is u keep your money and buy one shot. the road of upgrading is endlessMaybe I will buy for example processor first (Intel core i5 3570 popped to mind), then motherboard and RAM, and graphic card would be last to buy. The period of this to be completed maybe around 5-6 months. Actually I buy part per part by monthly for one or two part. Owh, the overall budget I hoped not exceeded RM3,500. And the games I played ranged from Bioshock, Dragon Age, Modern Warefare, HON, with sedap mata memandang setting. ANY SUGGESTION for me? |
|
|
Sep 10 2012, 04:41 PM
|
![]() ![]() ![]()
Junior Member
420 posts Joined: Sep 2012 |
QUOTE(gruntz99 @ Sep 10 2012, 04:30 PM) I am planning to build a PC rig from the scratch and the desktop computer I would use as mid end gaming machine. But as for the budget, I still could not determined it as I planned on buying part per part because I don't have enough money to buy all the parts. zeronehza, what do you mean by endless? Isn't it more cheaper build your own PC than buy one shot?tqMaybe I will buy for example processor first (Intel core i5 3570 popped to mind), then motherboard and RAM, and graphic card would be last to buy. The period of this to be completed maybe around 5-6 months. What I need? Processor (prefer Intel i5 siries) Motherboard (any good motherboard with SLI capabilities) GPU (I don't know what suit for what I want but any good and money effective want would be appreciated) Casing PSU Monitor 20-23 inches Ram Mouse and keyboard (I want Razer brand) Any part missing? It's from scratch and I never build PC rig before but I want to try it with the guide maybe only here and the internet. I don't want suggestions from salesman. Actually I buy part per part by monthly for one or two part. Owh, the overall budget I hoped not exceeded RM3,500. And the games I played ranged from Bioshock, Dragon Age, Modern Warefare, HON, with sedap mata memandang setting. ANY SUGGESTION for me? |
|
|
Sep 10 2012, 04:44 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,996 posts Joined: Apr 2008 From: Bolehland |
|
|
Topic ClosedOptions
|
| Change to: | 0.0167sec
1.46
6 queries
GZIP Disabled
Time is now: 21st December 2025 - 08:22 PM |