Just got memory with samsung UCCC and BP PCB. SPD timing @200 MHz 3-4-4-8.



Brain Power PCB



little test @2.54volt 272 MHz 3-4-4-8 1T MemTest



This post has been edited by Benny Lodewijk: Jan 29 2006, 09:28 AM

what brand are ur rams?

good performance there dude..........

This post has been edited by borneo: Jan 29 2006, 09:22 AM

NOT DUAL CHANNEL KIT. Sold separately..

huh bro ur review weird

i found UCCC on apacer ram..it's so good???

WOAH~ 272MHZ? On Value RAMS somemore? 1T timing? 544DDR?? O.o... That's high...

Your result more better than this one > Corsair Value Select 2 x 1GB DDR400 @ DDR510

waiting more result on you.

nice result.. i always love to see value ram par with performance ram.. even sometime smoked 'em..

UCCC overclocks best on BrainPower p.c.b.

Actually, it's just the 1GB version of TCCC.

what weird bro ?

lol i oso dunno

looking for more Window based benchmark and testing.

how much you got these baby ?

lol value ram price lo

what if not using BrainPower PCB??

about 190 US$ for 2 x 1 GB

USD190 ? How much is that in RM?

Less than RM730 at current exchange rates.

from the picture its not prime stable, u hv to run test 5 for at leat 100 loops

anyway it looks promising

RM730? wah... can oledi buy 1gb high perf one...

1GB performance ram won't do squat if your games requires more than 1GB. I'd take slower but larger memory modules any time.

For heavy applications such as gaming, larger ram makes more difference.

Safe to say that, in this situation... quantity wins.

even in AMD systems? so far i heard in AMD systems, the clock speed is important. is this true? if thats the case which one would bring more benefit to an AMD system? tight timings or high mem freqs?

Some bench with superpi

There's no point if you have 1GB of superfast memory with supertight timings if your applications uses more than 1GB of ram; causing your hard disk to swap disk.

You will encounter better experience with more ram in this case. It all depends on how much ram you're using in your daily applications and games.

wow, nice clocks there..

cant wait to power up my uccc on this neo2....
gosh, where should i get good psu in jB?

Super PI 8M @ 280 MHz 3-4-4-8 1T

nice, up to 280MHz

thanks... now trying to stabilize it at 290 MHz.

apacer 512MB ddr400 with UCCC attached found at viewnet lyp today..
i didnt bring enough cash to grab 2 stick.. sigh

4 more stick left..

Check the PCB before you snap them.

yeah...lucky like me...my apacer using bp pcb on chip dt-d43.

look for other chips for 1GB kits.. there are better ones for 1GB..

just grab two stick today to try out..
its a BP pcb..
as babyelf said, not much can it do tho.. 260Mhz @ 3-4-4-8-1T @ 2.8Vdimm(2.9V will be the same result)..
coz of the single sided maybe..
neway the corsair VS 1gb stick with UCCC+BP pcb also got there at LYP..

This post has been edited by newbieockids: Feb 14 2006, 07:50 PM

OT:

any other nforce3 user here with uccc pc4000, but cant push it beyond ddr520??
for some reason, im stuck at ddr510.. test with a venice also same..
but i can tighten to 3-4-3-8 @ 2.6v
i need a solid proof, if its nforce3 limitation, coz getting a nf4 board means i need new GC too

nforce3 with bt-d43.... masuk book ke?

if it's nforce3 limitation, then i'm in the same boat as u.... pengsan la nak upgrade mobo n gc

using venice?
tried sideeffect's 1.c std, tccd, ballistix, no go..
borrowed e6 venice also a no go..
but at least u r on 2.5-3-3-x , while im looser at 3-4-4-x @__@
2T wont help either..
and i dont think switching to nf3 ultra-D is a wise idea

-------------

any secrets to burn-in low voltage rams?

This post has been edited by e-jump: Feb 15 2006, 07:59 PM

mine's a winnie, but since u've said u borrowed an E6 Venice also no go, then i just assume that i wont have better luck other than changing both mobo and proc..... and also the video card. AArrrkkkk..... well at least i can run my ram at 240Mhz @ 2.5-3-3-8

at last this apacer UCCC perform a little bit better..


2.5-3-3-7-1T maxed out at DDR 500..
superPI 1M successfull at DDR 490..


3-4-3-7-1T maxed out at DDR 570..
superPI 1M successfull at DDR 560..

bro beli mobo , cpu n gfx aku la.. lolz.. bess2

high speed uccc users, do u use active cooling for em?
im loosing faith with my sticks

what is the highest u can get with urs e-jump?..

What the timing for UCCC ? I got myself a pair today..but..seem my timing not very good. I already set 8-4-4-3.0 and 1T timing..the Row Cycle time ,Row Cycle Refresh time? Write to read delay time..put wat value is optimal for UCCC?

UCCC is normally designed for high speed with high latencies; at least from the sticks that I have. The best I can get is 3-4-4-8 @ 275Mhz. Not too bad for a 1GB stick module but my board dictates that it must run 2T.

mmm how about TCCC? SAMSUNG 515
K4-H560838F-TCCC

bulk order by moderno one
http://forum.lowyat.net/index.php?showtopic=257589

This is UCCC thread. I believe there's a TCCD/TCCC thread somewhere. Kindly post your query there, thanks.

I am pinning this thread up as official UCCC thread.

guys, do ur UCCC rams get very hot with 2.6v?
mine damn hot..
juz got AllnGaps cooler, manage to squeeze more mhz..
now doing 260 memtest stable
but the ram still hot...@2.65v.. even with cooler

----------------
WTF... im still suffering random reboots when rams beyond 255
its not BSOD, but reboot..
feed vcore 1.5v also a no go..
damnit, its memtest stable >__>
could it be seriously shitty mem controller??

This post has been edited by e-jump: Mar 8 2006, 02:57 PM

im running it at 2.8V.. not hot at all..

I have a KVR with UCCC chips, but dont know how good they are as i am using 478 3.2GHz,

They are 512mb X 2, But i believe they can do high speed.

Yeah it can get a bit hot especially if both of them are placed next to each other in your mobo. However, in my case, I am using a 12cm fan to blow at it directly and the placing is having a huge gap, so no temp issues. It is rock solid at 270-275mhz.

what about their pcb?..

woot..
manage to revive my epox \o\ \o/ /o/
now blent test the rams at 260 ...
i guess its my psu is the culprit, having weak 3.3v rails [fluctuate like hell]

my epox is using 5v rails for ram, so currently doing good

-----------------------
its weird, my epox cant memtest error free like my neo2 in dos at 260.
but, my epox can prime in windows at 270 while my neo2 fails even at 255


for now, to hell goes with memtest, as long its prime/superpi stable, im fine with it



lookin good
blend while irc'ing n downloading n surfing

This post has been edited by e-jump: Mar 19 2006, 01:49 AM

My G.Skill HZ.

This post has been edited by kianwee: Mar 19 2006, 12:12 AM

nice ram kianwee

look like this chip can push very high speed with very loose timing..

so can anyone tell me what is more importance..high speed with loose timing

or moderate speed with moderate timing?

I will always go for highest speed possible.

i took.. tight timing and high possible (moderate) speed...
reduce high temp and high voltage...
high speed and loose timing not pretty good for me...

Just noticed there's a UCCC thread

Here's my result with Apacer Value Rams (Brainpower PCB), stable
DDR512, 3-4-4-8 @ 1T, 2.65V


This post has been edited by Dreamworks: Mar 30 2006, 12:29 PM

Why don't you get another stick and run it together. I would love to see how far these sticks can go in dual channel.

i have a samsung UCCC ram;
if i set the memory to the ram default timing 3-4-3-8 250mhz 1T, means i also OC my processor at the same time ?

What is your cpu? What is the multiplier you set when you set your RAM to that timing? It's better to list your hardware spec here to enable others to better help you.

CPU = athlon64 2800+ (clawhammer 9x multiplier)
mobo = foxconn 754 (nf4 pci-e x16)
ram = ocz pc4000 ddr500
GC = galaxy 6600gt zalman
casing = icute + 450w psu

juz curious if i happen to set the HTT from 200Mhz to 250Mhz, this will also OC my cpu core speed?
can my cpu stock fan cooler support the OC to par with my ram?

thnx

Wow..those Samsung chip on Value select RAMs make my hands itchy to get one...

But i never seen the Corsair VS using the UCCc chip before...mine using corsair chip

This post has been edited by kurikuraX: Apr 23 2006, 02:10 PM

You can get it at Navotech @ The Summit JB. Search for Kainos, tell him Uzairi asked u to find him a good psu.

Dont look at the SuperPI speed .. cos i enabled auto throttle on the Asus bios thus the CPU speed fluctuate ..

Didn't have proper cooling yet. Gonna super Air cool this bloodie hot prescooots down when got time. heh ...

DDR 500, 2.5, 3,3,7 @ 2.75vdimm .. powa

hy there, i just bought Samsung UCCC but its 2x512MB Kingston KVR not sure wat PCB they use



i tried to overclock with 1:1 paired wif Venice 3000+ but couldnt pass beyond 240HTT, but after using memory divider 5:6, i can get all the way up to 300 (with clockgen) 280 bootable... can u guys gimm advise about how to make it 1:1 with DDR500?
i'm using Asus A8N-SLI Premium 1009

@uglyvamp
Nice clocks there, seldom see a UCCC hitting DDR500 @ 2.5-3-3-7

@sniper69
I thought you wanted to get performance RAMs? What timings did you use when you got stuck at DDR480? Most UCCC will top out around DDR480 @ 2.5-3-3-7, but for 3-4-4-8 it's a different story ... DDR550

This post has been edited by Dreamworks: May 7 2006, 09:16 PM

yeah sure, currently looking for it, now stuck to valueram since my budget wor...,now i increase my timing to 3-4-4-8 n manage to get even 290HTT 1:1 until it turns to blue screen...i guess it reached the limit?owh...no wonder lor...3-4-4-8 can get at least DDR550...here, my screenie


@275HTT 1:1


@280HTT 1:1

Sniper, got A64 screenie?

thought i submit the pix here...got rite? u mean processor cpuid? CPUz?

ehh i mean A64tweaker........

ewww...A64Tweaker...me myself dunno how to use it lor...

Then learn to use lor Managed to squeeze about another 700MB/s of memory bandwidth on my setup

whoah thats good...700MBps increased...

erm...just wan ask.got some 1 wan let go UCCC ram...looking for a pair 512x2 here.DDR400.who wan sell can pm me asap.thanx

my UCCC can hit 2.8v 250@2-3-3-6....

i will sell mine but with highest offer...this ram performs well ok... i lov ethis module anyway...good price, i'll let go
2.8VDimm@250@2-3-3-6? 1GB module or 512MB module? jelousla camni...

[quote=sniper69,Jun 7 2006, 07:05 PM]
i will sell mine but with highest offer...this ram performs well ok... i lov ethis module anyway...good price, i'll let go

wat is the price u willing to go??hehehe

I think his are performance RAMs, that's why can hit such nice clocks I doubt UCCCs on value RAMs can do the same

haih....may i know where still can get value series UCCC?

no, is Corsair Value Select.....

tonight i post up print screen....

Woa ... You serious? DDR500 @ 2-3-3-6 is very good for UCCC based RAMs

manyak jelesla ini macam...ok, i'll try mine at DDR500, can or not at 2-3-3-6, pretty low la for VS punya ram, anyway, mine now at DDR500 3-4-4-8 1T @2.6VDimm oni.

hahaa...sms u so many time dunwan sell uccc for me.no choice grad corsair pro series.nop bad.can do 275 3/4/3/7 at 1 T timing.

nah, i love my UCCC,only sell it to who willing to pay more...RM350 onwards (i hope no one).
u get urself pro series, how much n wat version?

i get rm350 pro series it is led version brand new.1024 512x2.it is ver 5.3...promoschip i think.i love this ram 2

anyone using GSKILL F1-4000USU2-2GBHZ PC4000 (2 X 1GB)??

i can only push it to 255Mhz at 3-4-3-8, 2.6 VDIMM.
i cant go higher than that.



some one said to me tat i have to burn in first.. is it true?
how to burn in? using PRIME is it?


thnx~!!

mine can get 260Mhz, 3-4-4-8, 2.6V, 1T

just now i changed the ref clock to 250 Mhz.
but when i do the Memtest it says.. the ref clock is still 201 Mhz.. y is that happen?
also said the same thing in cpu-z/.. aiseh

load setup default, save and exit, shutdown, turn on, place ur setting back..

I saw only 1 Intel platform here using the UCCC RAM.Erm...is it that UCCC is not really prefer by Intel platform due to their chip ?Guess UCCC and TCCD also not really popular ifor Intel mobos.

I need some help here regarding a new RAM tat i get to fit in my DFI Nforce 4 Ultra D.

My ram is exactly the same as the pic in the first post, the only different it is APACER brand.

Ram details : APACER 1GB PC3200 CL3 double sided (with Samsung K4H510838C chip on it)

My present computer already got Corsair 2x512MB PC3200 CL2.5 RAM.
But when i plug in this single stick on my board it seems cant boot.
I already tried put this APACER ram on board stand alone on every slot ( means i took all both of my Corsair ram) but it still cant boot up.
And i tried it too put it in any of the ram slot while both of my corsair ram is already plug in too.

3rd test, i tried it with slot 1 512MB corsair n 3rd slot with 1GB apacer or even do it opposite way. but still cant boot up

Both way also cant boot up, the question is
is it bcos of dual channel matter? As i dont hv another 1 GB ram to test it.
or is it bcos of APACER 1GB this ram is not compatible with DFI Nforce 4 Ultra D motherboard?

Hope some sifu out there can help me. Thank you