i would like to check with you guys, is the standard installation include the raceway to cover the fibre cable? (inside landed property)

Do u guys have a unsecured SSID named "maxis" when the router is turned on? So this is the Maxis hotspot thing?

suddenly i realise i might got huge problems here

you said for high rise is using current telephone port

my telephone port is in the living room... but my pc is in my bedroom and i want the equipment in the bedroom... can be done or not wo? i am in high rise oso leh

if cannot, die leh... my installation coming next week... please help!

no i cannot have long rj11 cable from living room to bedroom...

i live with my parent and they may trip and fall

rj11 cable is not a solution

understand, but still do not like that solution via RJ11... somemore too long for me... what is the maximum length?

not good at nailing etc, really

any other possibility?

if rj11 the only solution, most probably will cancel my installation

someone said in Thread1 can be done... not sure if it's meant for landed properties only... high rise can do or not?

If you insist putting in your room.
Better get RJ11 yourself. You can request them but tambah $$$ la.
Counted as non-standard installation.
Or you find yourself a contractor pull the telephone into your room lo.
As they calculate the cable length ma. 85:15 you can read faq. You bring measuring tape go measure yourself. Lol.

Then you find yourself a contractor shift the port into you room.

ha? so complicated!

can shift telephone port one ah?

how much to pay?

where got time? next monday my installation wo

i thought you already have streamyx in your home bro, how come you don't mind leaving the streamyx modem in the living room but you insist on having the maxis modem in your room?

how have you been connecting your pc to your streamyx all this while? i thought you're not using wifi?

yes, streamyx modem is at my bedroom lah, connected directly to my pc

i use wifi at living room... mainly for my ipad

for the phone, i've pull a long telephone cable from bedroom to living room

Since the modem is at your room. Maxis one shouldn't be a problem right.

then you already have the rj11 set up and ready to go laahhhh....

rj11 is the telephone cable!

yakah>? rj11 is the telephone cable?

the phone itself its cordless but the dock still need to be wired.
and the standby time is awful not 1 day battery finished.
and the range is not good.
I use back my panasonic dect phone from streamyx is better.

can.

i used my old Brother analog fax also can.

normal phone oso can ah? good leh like that... save electricity

but i dun have any phone leh... the tm phone must give back wo during termination

both port can use.
but if call come in if u hang up on line one, line two will go haywire.( means cannot angkat both phones at the same time)

dunno. maybe need splitter. maybe you can try urself.

how about the thomson router?

do you use the thomson router given by maxis or you change to other router?

any problem on the thomson router for you? u on the router 24/7 ah?

yes still using the thomson router coz need the voip service.

using it 24/7. only once a week do manual reboot.

just put a cooler pad below the router and there will be no overheat and it will run fine.

Agree. Digged out one old cheapo cooling pad and router becomes much more.. stable.

Anyway, Thomson Router seems to be limited in terms of configuration.. can't find MAC Filtering or I'm missing out things

If I want to hard-reset the router, what are the things I need to take note / reconfigure later?

1) Maxis account id
2) Maxis account password (+1 behind)
3) Telephone number.
4) What else? Appreciate help if I missed out things.. don't wanna screw up things after a hard reset (just in case)

so you get exact 10Mbps doing speedtest. any improvements? how about access to sites in USA ok ke?

another thing when tm do fiber cabling. you know the value of ?dBm on your fiber line. the highest the value your connection may not be stable in long run. or in optimal state can get 90% speed benchmark.

the password is user ID +1

User ID: 12345
password: 123451

for dBm you need to pujuk the tm fellas. nice to them give them drinks. then they tell you hehe..

1.25 is norminal. if you get 10+ below 11. it be slighly >1.25 with IDM.

above 20dBm is ok. you get 90%+ speedtest.

but if above 25dBM, your ONT takes very long to online. tm keep quiet and advice users leave it ON. hehee. while in between u have many many probs. this is classified info.

i had try unifi 20mbps, download from rapidshare get around 100kbps, speed very unstable, sometimes drop until 10kbps...
i had tested download from filesonic with maxis fiber 10mbps, only get around 120kbps...is it normal?

below got few link, you can try

Rapidshare
Netlod

Ammon Share

Default username & Password for Thomson Router
Username : MaxisBB
Password : <blank> (No characters, leave it blank, just press log-in)
Username : Administrator
Password : <access key on a sticker at the bottom of the router>

Note: Be warned that it is case sensitive

installed yesterday
930 appointment maxis and tm total 3 guys reached like 950
tm settled the line by 11
maxis configured till 12 as only 4M instead of 10M (still remain 4M for the moment)

tried rapidshare as well and also crashed/terminated like 1sec once it starts
mediafire is fine