Hi all,

I want review for the following memory which I can use for Virtulization in Windows Server Hyper-V

The TR3X6G2000C7GTF is a 6144MByte kit of DDR3 SDRAM DIMMs based upon Corsair’s ultra perfo-rmance
DOMINATOR family of memory which includes Intel’s Extreme Memory Profiles (XMP 1.2). This
enables a robust, profile based high performance DDR3 over-clocking solution for Intel X58 platforms
targeted for enthusiasts, gamers and overclockers who want to extract maximum performance from
their platforms. Built using Corsair’s Dual-path Heat Xchange (DHX) technology coupled with a Corsair
Airflow Fan, this part delivers outstanding performance in the latest generation of X58 DDR3-based
motherboards. This memory has been verified to operate at 2000MHz at low latencies of 7-8-7-20 at
1.65V VDIMM.

Test spec:
Each three module set is tested at 2000MHz
Packaged together immediately following
system test
 Tested together at 2000MHz, Vdimm = 1.65V, at latency settings of 7-8-7-20 on X58-based motherboards.
 SP D programmed at:
XMP 7-8-7-20 values at 2000MHz at 1.65V Vdimm JEDEC standard 9-9-9-24 values at 1333MHz.
Features:
6144 Megabytes of DDR3 memory

Three 2GB modules

100% tested at 2000MHz in X58-based DDR3
Motherboards
Lifetime warranty
DHX technology provides maximum cooling

Review invited about this memory.


Yogesh K
IIHT Malaysia
[Attaching wings to your career]
3G Infocom Training Sdn Bhd
Unit W-03A-0 & W-03A-1 West Wing
Business Park Subang Square
Jalan SS 15/4B, 47500 Subang Jaya, Selangor DE
Toll Free: 1-300-80-IIHT
Tel: +6(03) 5638 1036 Fax: +6(03) 5638 8036

Seems like my second pair of crucial had broken down again. First pair was sent back to warranty, received it and months later, seem to have broken down again. Giving me BSOD problem etc. I wonder are they really this bad.

4gb kit? If u get D9GSV then shd be better, probably u got D9HNL on hand which is the worst 2GB dimm.

It is good for us known the ram handbook .....

Thanks for sharing the knowledge.......

Sushil Kumar

XP Series DDR2

996562 DDR2 XP2-8500 1066MHz DDR2 PC8500 4GB Kit CL 5-5-4-12 2.3V D9GSV

996561 DDR2 XP2-6400 800MHz DDR2 PC6400 4GB Kit CL 4-3-3-10 2.2 - 2.25V D9GSV

HP Series DDR2

996564 DDR2 HP2-6400 800MHz DDR2 PC6400 4GB Kit CL 5-5-4-12 2.0-2.2V D9HBD, D9GSV

EM Series DDR2

996557 DDR2 EM2-6400 800MHz DDR2 PC6400 4GB Kit CL 5-5-5-18 1.8V D9HBD, D9GSV

Value Series DDR2

996558 DDR2 PC2-6400 800MHz DDR2 PC6400 4GB Kit CL 5-5-5-18 1.8V ?????

Guys, if I need a 2x2GB High Performance RAM kit, which top 2 would be your choices?

corsair XMS3 1333Mhz 1.5V 4Gb kit or team Elite 4Gb ? .. which one better ? Price almost the same ..

This 1, elpida chips with black PCB. Mushkin FTW.

http://www.techpowerup.com/index.php?66776

thx dude..

---

Added on August 31, 2009, 2:57 pm[WTS] WALKIE TALKIE KENWOOD TK 1118 (NEW)(NEGO)

This post has been edited by h_n_s: Aug 31 2009, 02:57 PM

hi ppl,
i am currently using dell inspiron 1520,
i think i am having some problems with my ram, wonder if anyone would guide me with what kinda ram or brand to buy?
thanks...

Well, no idea on what the chips are being used but my experience so far with Crucial had been really bad. Gotten the 2 * 1GB Ballistix, sold them and was told that it went kaput after that. Gotten the 2 * 2GB, dead within a few months. RMAed, came back, then died again in a few months. They are just sitting handsomely on my table, thinking whether should i warranty them or not

guys
need opinion here
which of this is good

Kingston HyperX 4GB 800MHZ DDR2 CL5 (5-5-5-15) Kit of 2
Kingston HyperX 4GB 800MHZ DDR2 Low-Latency CL4 (4-4-4-12) Kit of 2
OCZ 4GB Dual Channel DDR2 800Mhz PC2-6400 SLI-READY 5-4-4-15 kit of 2

or if u guys have any other choice of 2x2gb do state it here

Hey guys wanna ask...Im planning to get an i7 system...choosing ram is difficult 4 me...im confused whether to get a kingston value ram or OCZ platinum...I understand that the 8-8-8-27(just as an example...dunno if it exists) thing but i still dun understand how much performance difference will there b between 1333 and 1600...thanx man...

Another question...i7 supports triple channel...Is it necessary to fill it with minimum 3 slots or i can use a single ram piece...

I got the Corsair XMS3 1333Mhz.. did not compare it with others...

If price almost the same, go with a more reputable brand....or brand with more shops that carries it

Sometimes it also depend on yr experience with that brand.... mine was either Corsair or Kingston...

Somehow I made my personal decision that Corsair is a much better brand for higher speed memory..

Read user reviews on amazon or some other website..

i need help... i got problems on my laptop... i was using my original 1GB ram... then i buy a Kingmax Ram 2gb and add it till 3GB.. i felt like... nothing has changed and perform slower than usual.... and the Kingmax i bought is second hand... 667Mhz de.... if i wana change the lappy rams.. which brand shud i get..

ram is good

ill go for Kingston HyperX 4GB 800MHZ DDR2 Low-Latency CL4 (4-4-4-12) Kit of 2

lower latency better

hi i got a question here, currently im running 2 x 2gb @ dual channel can i add another 2 x 1gb to make another dual channel and make it faster?

nice handbook by the way, thanks for sharing.

yeah can, means 3X3Gb = 6Gb dual channel, but then if you are using 32bits O.S , no point cause 32bits only support max 3.25GB Rams, unless u running on 64bits O.S

need help in some troubleshooting.

my friend just got another peice of 2gb kingston 667MHz rams, to pair up with his current 2x1gb corsair value select running on dual channel.

i tried on whichever remaining slots, on one of the slots, the pc will start and hang at the BIOS screen, the other slot, the pc will just start, and no display.

whichever combination with the pair of corsair rams wouldn't work, but it works if i run 1 piece of corsair with the kingston. is this caused by the different brand and chipsets of the rams? how do i solve it?