i see, i couldnt found the info about the mobo. Maybe i will try to check again later.

alright, tell me when u know k! thanks ya!!!

If I plug DDR2 RAM into DDR1 slot, will it work?

Will the DDR2 RAM's performance be push down to only the highest of DDR1 OR it won't actually work at all?

i won't even fit... the notch are different to prevent genius from do something weird...

agree here. the slot is differ.
Please do not force to put it to the slot. It will damage and void the warranty as well.

Hi, i recently bought a Corsair 1gb DDR2 PC667 Ram, and after i plugged in the ram, my comp will auto reboot after like 20 minutes or so.

for you information my mobo is T-force 550 and there's a 512 ram in it... plz some one help me!

your ram timing in BIOS? the vdimm? what's your other ram (512MB) timing and speed?

guys i am looking for the type of chip used by the following ram :-

Apacer 1 gb ddr pc3200 and this is wriiten on the RAM :-

AM3A5708FEK-5B

This post has been edited by iman_210: Jun 11 2007, 03:17 PM

i couldn't get the timing in my bios , hope this could help...

perhaps the timing is not suited with your mobo. As my brother faced problem before, the timing cause the whole system unstable when running application.

You can check timing in BIOS from the DRAM configuration. Beside auto, try to set manually.

@kai27
weird. both ram running with same timing, shouldn't cause any confusion. moreover, that timing are pretty loose. have u try different slot? btw, both won't run in dual channel, so don't bother running the in same color slot. try different slot.

Woooooooooooooooo

Thanks for your precious information!!!!

I'm interested in such kinda info



LIke that

any info on this guys?

I just upgrade my ram from 512mb to 1.5gb.
Old ram - Corsair 512mb 533 DDR2
New ram - Kingston 1GB KVR667 DDR2
Both ram with different freq. My Asus P5PL2 mobo can only support up to 533mhz. I check the freq and it show only 267.6mhz. Is it normal? So far my pc is running ok. Here are my CPU-Z for your reference...Thanks!


This post has been edited by yeeck06: Jun 12 2007, 08:56 PM

@yeeck06
533/2=266. it's normal. nothing wrong

just realize mine 1GDDR2667 CVS when reading iusing CPUz doesn't even hv serial number or manufacturing date...

i found the timing in BIOS, but i hav no knowledge in tuning the timing. so i better don't do anything bout it. Thx 4 the info

hey , running the ram in differ slot didn't cause my pc to auto restart again , i think this is the solution huh?? thx man, for all the help...

Thanks! I got one more question here....There are 4 ram sockets on the mobo......Channel A - Yellow and black sockets and Channel B - Yellow and black sockets. 512mb ram inserted into Channel A yellow socket and 1gb ram inserted into Channel B yellow socket. Initially, the 1gb ram was inserted into channel A black socket but when I turned on my pc, it cannot boot up. Anyone can explain this?

@yeeck06
mobo very picky. sometimes it won't run at all if use certain ram.

btw, 1GB and 512MB won't run in dual channel.

Try to get RAMs of the same memory capacity next time.