Guys,

Can someone help to provide guide step by step on how to configure Alcatel Lucent BTU to output  VLAN 621 to port 2 and other VLAN (i.e VOIP) to other port

I have my own router with DD-WRT; however it doesnt really support VLAN tagging

Note Alcatel Lucent only works using command prompt; hence the guide in this page is not gonna work

Hi any chance you can post some screen shots of your vlan setup in the tomato interface itself rather than the ones that are up? I have just installed one of the tomato variants onto my wrt54GL which has vlans so I can use with maxis but its very confusing if you havent done it before.

much thanks

seem like maxis operator (or hacked?!) changed your huawei onu configuration

Been using Asus RT N66U as my custom router foor the last 6 years I was on Maxis fiber.  On Monday, I suddenly lost all Internet and had to make multiple reports to Maxis.

But somehow I fixed it today by changing the WAN port connection from LAN2 on the TM Huawei ONU to LAN3 port, does anyone know why this happening? It's always been on LAN2 all this time. Somehow suddenly only works on LAN3.

Hi all, have just signed hi Maxis home fibre 30mbps. But the connection is very unstable
Not sure what’s the cause?

and because it’s a 3 storey house, the signal is weak in other floor.

Anyone has similar problem ? Any recommendation if we wan to change to a stronger router?

Hi guys,

My current situation is that my 10mbps line frequently has problems (not sure if its the line itself or router) where the connections is really slow (won't even load a page), but it gets back to normal after rebooting the router. It also disconnects/reconnects every 20-30 mins. (not a problem, but is annoying at times). For the first year or so, there wasn't any issues like this however.

I'm planning to upgrade to the 50mbps plan and also upgrading the router to perhaps make the connection speed more reliable and consistent. Any potential advice on what I can do in my current situation and/or recommendation of any router upgrade? Also, perhaps a guide to show me what it takes to set it up?

At most, there is 6-8 devices in a 1000sqft double storey. So I don't need extra coverage, but is 6-8 too many for the default Maxis router?

I have read through several posts through searches, and am still confused which router would best suit my need. Thanks in advance!