geezer mah

for me the only monoeye i like is Sazabi & Sinanju
and i prefer Zaku II(especially FZ) over Marasai
and oh, include Blaze Zaku Phantom too

well they do give u the 2.0 hands, just without the pegs to hold the weapons

This post has been edited by General_Nic: Jun 23 2012, 09:49 PM

If it ain't spinnin' it ain't a gatling.

Overboard... Katoki san, just plain overboard.

Bandai should just stop mucking around with MG manipulators. The detachable ones used for W gundams are not practical despite their original intentions, whereas the Marasai ones don't seem to be any better than the 2.0s.

Just bloody stick with the 2.0 ones please.

MG Marasai looks sweet, but I'm actually more keen on the HGUC Unicorn version... olive green looks more military-like than bright orange, and there's the better-looking Feyandeen rifle in addition to the puny pew pew pistol.

gotta agree with u on the MG manipulators lol, the separate ones from B-Club are useless and way expensive lol =..=;;
but indeed the Marasai's color scheme from Unicorn series is awesome, but the feyadeen rifle is from Hambrabi lol ;p
or prolly i'll just scratch-build one


This post has been edited by golbeza: Jun 23 2012, 11:04 PM

Turn A is HG?

apparently not, can see with the holes for holding the shield at the arm there and also the clear yellow eyes ;D

MG Blitz Gundam is out on zgmfxg yaww, it's decals are gooding too
more here >>> http://zgmfxg.web.fc2.com/MG/SEED/BLITZ/1/BLITZ1_1.html

oh yeah, must be Damashii figure
btw Seed HG is now getting better.. dont you think?



http://blog.livedoor.jp/hacchaka/archives/51828085.html

This post has been edited by nazrul90: Jun 23 2012, 11:49 PM

MG Marasai wields the MG Sazabi's beam rifle is way better than the puny rifle lololol

hi guys need help...

has anyone created gundam unicorn destroy mode HGUC version before?

I m stuck at step 10... where i need to attach part C7 (part of the wrist) into part 9. It seems that the part C7 is too small for part 9 to enter. i tried pushing it in but its just too tight...i m afraid i might break it.

i hope someone can help asap.. if anyone still has the instruction manual as reference it will be great..else i will post up some photos here soon...thanks!!

Did anyone manage to collect all 8 RG model? can u guys upload it here? i've just start to collect 2 and 6 more to go.. ^^
Is there any other RG model on market that cant be found in store?

This post has been edited by ejoeflizzow: Jun 24 2012, 04:43 AM

Make sure you've trimmed the leftover nubs from the psychoframe parts E14-15. There are two nubs at the distal end of the pieces (near where PC6 goes) which could obstruct C7 as you slide the former into the latter.

Also check the polycap piece PC9 as it might displaced if you couldn't clip E14-15 together tightly.

And since we're on the topic of the Unicorn's forearm, be cautious of the beam tonfa holder. It's held loosely in place between C2 and the tip of C7 solely by friction, and a little nudge is enough to dislodge it especially when it's extended forwards. You might accidentally flick it off if you're not paying attention.

http://imgur.com/xiiud,EZ4RJ,6QhIb

I finally got started on my personal mobile suit project that I talked about ages ago, using a combination of MG Ground GM and GM Custom. This is actually doable now that I got my hands on some spray paint. I just sprayed the inner frame, and the shield/leg armor needs another coat of black before i'll be satisfied with it. It wasn't my intention, but with the colors i'm gonna use(black and dark blue), this will definitely have a TITANS vibe I think. Of course, the big change is I modified the legs so now they are more like 00 Gundam kits, complete with limbo legs and hip rotation. Suggestions and criticisms wanted.

This post has been edited by TaurusOxford: Jun 24 2012, 07:42 AM

wow what kind of paint you use ? looks quite thick and cover entire detail with it too.

anyway guess what is my new project is?



seem quite easy to spot on with the answer.

This post has been edited by chriswoo: Jun 24 2012, 07:53 AM

The grey paint JUST got sprayed on so it's still wet.

I see, are you using local Spray CAN to paint it? the kit was great but if it too wet and too thick it might cause problem in fitting and also hinderer to any articulation movement, was it your 1st time attempt on painting?

Yeah, it's spray cans. I'm new to using spray cans so if you got any basic techniques to give me, i'd like them.

the legs, the ankles, and that huge thing on the right gave it out. it's the 00 Gundam Seven Swords

Yeah. Damn easy.
MG 00 Seven Sword.

Hi thx for the reply. But i have checked and removed all the nubs. It is just that C7 could not enter into the combined E14-15 (which is tight and accurate). Can i send some photos into your email? PM me as I could not attach the photos here.

EDIT: Kindly ignore this post. I manage to attach both components by pushing them in very very hard LOL. I m not sure this is the right procedure but as long the parts are at the right place and didn't broke, LOL. Thx alot guys.

This post has been edited by dead_psycho: Jun 24 2012, 04:37 PM

mobile suits shown in novel is always awesome

You could try sliding in the c7 before you tighten the e14/15 parts... Improvise, bro