Hmmm....want to comment about some paint issue here.
My genetic silver looks very nice.but at certain angle at my side passenger door can see three very blur patch of silver. I sent to Sierra Glow again. They assure me its already applied with Sierra Glow sealant i ask Mr Chong to help me again see if it is really because of the paint so they inspect again. by using light and water. they say if water don't stick at the door panel and come down very fast plus forming a small water droplets that is already been applied with sierra glow.
They use some very light compound to perform it again. Then clean it with their shampoo rinse with water then apply again the glass glow liquid on the surface. it is still the same. So when u guys receive your car. Please look at all angle. usually 20 degree to 15 degree angle you will be able to see it with help of some light. luckily only three very light small like 2 inch wide patch. blurish. base on Mr Chong, this is during production the color applied they did not wait it to dry properly or apply unevenly then straight away put clear coat that is why it become like that. But the surface is very flat no dirt or anything is just the color a bit blurish behind the clear coat.
and already got two small super small stone chips on the right hand side of passenger door. no matter how hard they try to restore cannot be restore...around 1mm to 2 mm deep scratch but not deep until the second coat. I think only the glassglow coat and the clear coat plus a bit of silver color chip off. they also try to use another compound to try smooth-en it out then applied sierra glow again but they cannot restore it.
So overall they already tried but not able to restore the chip off paint. The person handle this already got 5 to 6 years experience. Working with Mr Chong. Since Sierra Glow start operating he is already there. forget to get his name. I think not Malaysian..maybe Indonesian... not sure..
So check properly. Near to the paint and angle watch properly. check for stain or mark.
This post has been edited by K2002: May 2 2012, 10:36 PM
Proton Prevé V6, ► Official Discussions for Proton Prevé
May 2 2012, 10:34 PM
Quote

0.0280sec
0.41
6 queries
GZIP Disabled