Guys, when i'm playing game, it freeze and speaker has buzzing sound after 10-15minutes,
3570k clocked to 4.5.

But when i set back to 4.2, the problem gone, so i try and increase the voltage at 4.5? Currently running 1.255 for 4.5, some people here need 1.38.

But i tried to run prime95 2 hours+ no problem, but after that, when i'm playing Diablo 3, it hangs and BLIZZZZZZZZZZZ sound comes from speaker and dafuq, the long dungeon i explored and need to explore again.

This post has been edited by JeffreyYap: May 20 2012, 07:31 PM

Your Load-line calibration(LLC) set to 100% maximum power to CPU right? So now yours 1.41 stable? No crash?

Testing with prime95? tested for how long already.
And by the way, your Cinebench what mark.
Edit: Just checked page 17, your mark is 7.51

This post has been edited by JeffreyYap: May 20 2012, 07:52 PM

So before you set to 1.42, you play BF3 system crash? So now ok already? (So far)

k i try to overclock to 4.6 later and post some benchmark

Asrock z77 extreme 4 with 1600 c9 Vengeance.

Woot, my Cinebench 7.64 at 4.7Ghz @1.400

That's impossible to get 9, i read review, review 5.0 only 8.13. Mine now 7.6x with 4.7GHz, so far no crash, weird.
4.5 @ 1.400 crash when imma playing Diablo3, then i tried
4.7 @ 1.390 no crash, i will try a little bit longer more and check the stability.

Edited.

This post has been edited by JeffreyYap: May 21 2012, 11:22 AM

Yea, edited.

Wah? 1066 stock and you oc to 1600?? Possible? Water cooled?

Er, how come? That's impossible, unless your ram is golden batch.
Even last time i used the Dominator, from 1600 to 1866 cannot even stable, DOMINATOR HEATSINK.

Ya i know, but he said his rams are "naked". So i made some comparison here.

Oh? Last time used AMD, 1600 to 1700 quite difficult already.
So by the way, if i want to make my Vengeance 1600c9 1.5v to 2000c9, what is the require voltage do you guys think?

X boleh la, tried OC my ram, not stable no matter how i tweak, maybe i need to do more researches first hehe.
So far my processor is stable only at 4.6Ghz @ 1.395 LLC 100% @89c temp.
Cinnebench 7.43pts

This post has been edited by JeffreyYap: May 23 2012, 07:51 PM

I tot yours 4.7 @ 1.425? Actually keep on crashing since 1.390, now 1.405 seems ok, will update u.

---

Added on May 23, 2012, 11:57 pm owikh84 ,
internal PLL voltage disable or enable?
Spread spectrum: Disabled
Intel speedstep: enable or disable?
For 4.6Ghz

I googled, usually people can get 1.3- 1.35 24hours stable for 3570k, wonder mine why need 1.405 .

This post has been edited by JeffreyYap: May 24 2012, 12:19 AM

But H100 conside a good water cooling also .
So Internal PLL voltage enable or disable?

Should have got that 3770k, i went to Digital Mall and searched the whole stores for 3770k, none of them have stock. After i bought 3570k, then yoongkeen pmed me, he has 3 units on hands aww.. Diablo on 15 May , urgently to build a comp that time.
1.405 for 4.6 is a lot, i cannot pass prime 95 after one hour because of the temperature 104c, unless i set my fan to maximum which the sound db will like a hairdryer, then temperature is 84c.

This post has been edited by JeffreyYap: May 24 2012, 11:00 AM

may i know some of your settings in Bios?
IGPU Load-Line Calibration you set Auto or 100% load.
Load-Line Calibration for voltage 100% load?
Internal PLL voltage enable or disable? Thank.

The intergrated GPU(iGPU) voltage's LLC auto or 100%?