Prolimatech Genesis or SuperMega worth to buy? Significant diff compare with Noctua NH-D14? Seriously, i like its design as well

Will do. But lupa the timing setting already. also lupa to do stress test for 2400 speed yesterday but i can say, 2200 C10 smoother than 2400 C11 or C12 IINM but the correct figure must be find out first. I think my ram chip not smoothly 2400 capable. Can I run PI with 8M calculation instead 32M? Got any significant diff bench setting?

-EDITED-

My bad luck, 2400 cant boot up my system anymore even at C12 and 1.65 vdimm. Roll back to 2200 C10 then



This post has been edited by lat_lonelyboyz: Nov 20 2012, 12:19 AM

Balik Penang roger aku weh. Tlg aku delid cpu aku nih. Hahaha...aku dh x tahan dgn temp dia. Skali hampot btoi

Previously run my ex hyperX 1600 @ 2000 with CL10. Cant go any higher very limit oc for my hyper rams chip.
Wanna try pair with my Sammy Green with same timing C10 @ 2000 tonite Run speed 1866 with timing 10-10-10-24 @ 1.5v (tightest timing and speed that make its stable) but cant boot up at 2000 speed and beyond even loosen a bit its timing. Might be not compatible voltage as Sammy run only used as low as 1.55v at 2200 but HyperX 1600 run at 1.65v. Set 1.65v also cant boot my system.

Any news when ur 'green' chip will be arrived bro?

Edited - If bought ASRock Z77 Extreme3 from Newegg, will get RipjawX 1600 CL9 2x4GB for free

http://www.newegg.com/Product/Product.aspx...N82E16813157330

This post has been edited by lat_lonelyboyz: Nov 21 2012, 01:29 AM

Better test ur chip for stability bro. gaming INMM, not cpu incentive.

IDK about max vdimm for each ram either but normally DDR3 powered by using 1.65v vdimm

Got 'gold' stuff offer bro?

Sudah ada tp budget yg xda...wahahah..

Bro, bila nk delid chip tu? cant wait to see ur chip 4.8GHz on air

Penang which area bro?

Ur chip not really suck bro as long as it can be run on 4.4GHz without any prob. Anyway, how much ur exactly vCore?


Dia ni mmg pure Penang...x caya tnya aku

This post has been edited by lat_lonelyboyz: Nov 23 2012, 09:40 PM

On Formula OC, 5.0GHz used same vCore as M5E bro? what about temp accuracy?

Means ASRock used a bit less vCore setting than Asus and didnt accurate?

Delid done. run naked but core temp higher than before delid. 32-47-40-35 figure something like that. core 1 and 4 running ok with low temp but core 2 and 3 seems like overheat

Might be. Tigher the screws but still can goyang2 the cooler as long as can wake up after delid, should be ok. But seems like got another prob

Mount IHS back + MX4 and 4.5GHz hit 100°c max. Totally my chip cant run too high as hot temp. Replacing higher performance cooling system might be solve this prob

Mine not stable 2200 at CL10 vDimm 1.55v but stable if bump a bit its vDIMM to 1.6v with same timing and speed even 9-10-10-28

But now just running at 2000 9-10-10-24 at 1.5v for safe used and 24/7. Found 2000 CL9 smoother than 2200 CL10 while running Photoshop CS5

Tried before with timing 11-12-12-28 at 1.6v but didnt tried any bench and stability test. Dont know it cant be stable or not with this timing

Bro, have try bump a bit ur ram vDimm at 2200 CL10?

This post has been edited by lat_lonelyboyz: Dec 10 2012, 06:44 AM

You may try its on other mobo like z77 exreme4 to see whether ur ram can push more or not.

Ur fren using z77 extreme4?

Might be compatibility prob. Try update ur P8P67 board to new BIOS.