if i order filament from web.qwikfab.com do i need to pay tax to sarawak? what service do they use for deliver their item to malaysia?
Repraps and DIY 3D Printing!, Open source hardware~
|
|
 Feb 21 2015, 01:07 PM
Return to original view | Post
#1
|
 
Newbie
0 posts Joined: Feb 2015 
|
|
Quote|
|
|
|
|
Feb 21 2015, 03:26 PM
Return to original view | Post
#2
|
|
Newbie
0 posts Joined: Feb 2015
|
anything else beside facebook? i didnt use facebook, their didnt has any account here?
|
|
|
Feb 25 2015, 08:11 PM
Return to original view | Post
#3
|
|
Newbie
0 posts Joined: Feb 2015
|
for autobed leveling which one is better? servo or proximity sensor? i already know how to setup servo but for the sensor i didnt understand in the thomas video on youtube, positive and negative from the sensor connect with positive(RED) and negative(BLACK) from the power supply directly or on the ramps terminal block?
and the signal wire from the sensor will connect into the z end stop signal pin? so there will only be 1 wire connect to the z endstop which is the signal from the sensor. am i right or wrong here  |
|
|
Feb 26 2015, 05:00 PM
Return to original view | Post
#4
|
|
Newbie
0 posts Joined: Feb 2015
|
your local hardware shop should got sell nut and screw, if not try ask at motorcycle repair shop near you, their should got screws and nuts.
|
|
|
Mar 10 2015, 02:57 PM
Return to original view | Post
#5
|
|
Newbie
0 posts Joined: Feb 2015
|
yumeprinter.com. im just received their filament yesterday, and so far the thing i print with these filament is good and the color also good. im printing it with 180 -190 with each layer stick pretty well. Their support also seems really good, their mail me to ask do i already received my parcel yesterday and call gdex for inquiry about my parcel without i even ask them to do so
Definitely will order from them again. |
|
|
Mar 12 2015, 06:07 PM
Return to original view | Post
#6
|
|
Newbie
0 posts Joined: Feb 2015
|
may i ask which ones is prefer for calibration print? Calibration cube like 10x10 or Calibration sticks like this ones https://www.youmagine.com/designs/calibrati...ign-information
|
|
|
|
|
|
Mar 12 2015, 08:04 PM
Return to original view | Post
#7
|
|
Newbie
0 posts Joined: Feb 2015
|
print it and is this ok? if i push my caliper with little pressure the cube measurement is around 4.9mm and then when i let go the caliper and let it without any pressure the cube measurement is 5mm. This is on each axis
Do i need to adjust my setting again and when i measure the cube with pressure or without pressure with the caliper it will fix on 5mm. |
|
|
Mar 25 2015, 03:48 PM
Return to original view | Post
#8
|
|
Newbie
0 posts Joined: Feb 2015
|
i also had problem with z wobble and i remix this http://www.thingiverse.com/thing:141479 design to fit my m8 threaded rods and i can say that the wobble on printed parts all gone now and it look nice and neat also really happy with the result
|
|
|
Mar 25 2015, 06:37 PM
Return to original view | Post
#9
|
|
Newbie
0 posts Joined: Feb 2015
|
QUOTE(zarul90 @ Mar 25 2015, 02:22 PM) what the thickness are suitable for the glass ? you should be ok with heated pcb > glassso the setup like this. heated pcb>aluminiumplate > glass ?  no need aluminium plate anymore if it was bend |
|
|
Mar 26 2015, 12:17 PM
Return to original view | Post
#10
|
|
Newbie
0 posts Joined: Feb 2015
|
QUOTE(zarul90 @ Mar 26 2015, 12:51 AM) yeah.. i think its better.. i forgot pcb heatbed also got hole for leveling screw.. haha lol, sorry i think i used wrong word some silly question.. how to remix it and fit M8 stud ?  i mean i redesign it in freecad to fit with my threaded rods and nuts |
|
|
Mar 26 2015, 12:30 PM
Return to original view | Post
#11
|
|
Newbie
0 posts Joined: Feb 2015
|
QUOTE(eehtsitna @ Mar 26 2015, 10:17 AM) Guys! Maybe you can try freecad, it can edit stl files that you downloaded from webI am exploring the software side of 3D printing. Trying to learn how to draw my own 3D object. Is there any good program which you would recommend for a beginner like me? Tried using Sketchup but all the measurement does not seems to add up once i export the file out as *.obj. |
|
|
Mar 26 2015, 06:09 PM
Return to original view | Post
#12
|
|
Newbie
0 posts Joined: Feb 2015
|
QUOTE(zarul90 @ Mar 26 2015, 05:31 PM) Hi solidwork also easy 3d software.. before this im using autodesk inventor.. when i try solidwork.. more easier.. This is what i create from copying the thingverse design so that it will fit my rods and screws ooo.. ok i tot can edit from the web hehe.. i edit the stl file.. the object full of mesh  
wobbleZ_fixed.stl.7z ( 6.97k )
Number of downloads: 2 |
|
|
Mar 27 2015, 12:17 PM
Return to original view | Post
#13
|
|
Newbie
0 posts Joined: Feb 2015
|
Guys, someone ask me to print i3 rework parts, how much should i charge
|
|
|
|
|
|
Mar 28 2015, 01:53 PM
Return to original view | Post
#14
|
|
Newbie
0 posts Joined: Feb 2015
|
QUOTE(altan @ Mar 27 2015, 02:47 PM) You could charge based on time, weight, or volume of print. ok thanks, i dont know how to charge them based on what you told so i just charge them according to prize on ebay  maybe you can give some example  This post has been edited by Prosperer: Mar 28 2015, 01:53 PM |
|
|
Apr 3 2015, 12:34 PM
Return to original view | Post
#15
|
|
Newbie
0 posts Joined: Feb 2015
|
QUOTE(boon96 @ Apr 1 2015, 12:37 AM) Hey guys, I'm sorry I tak sempat read all the previous posts but can someone guide me through how to get a cheap printer? i bought mine from aliexpress prusa i3 kit , or you can follow the BOM and source parts and vitamins locally. For acrylic frame, it will give some problem but dont know when it will happend it like time bomb  i think i want to convert my i3 to wilson ts for rigidity cause i saw my acrylic frame got a little bend on parts that hold the y axis. if you type of person that love to modified and tweaking thing find kit that come with controller that we can modified and upload the firmware to the controller, usually aliexpress kit that come with melzi board we can't upload or modified the firmware |
|
|
Apr 3 2015, 06:48 PM
Return to original view | Post
#16
|
|
Newbie
0 posts Joined: Feb 2015
|
QUOTE(KLKS @ Apr 3 2015, 05:05 PM) you can actually reflash the firmware on the melzi board, the isp headers are broken out. I helped a friend flash his melzi's firmware to repetier host 0.91 interest in this, can you tell me how cause my board i can't upload merlin into it, and the seller also tell me that dont touch the firmware 1 week with the melzi and change it to ramps1.4 already |
|
|
Apr 4 2015, 10:11 PM
Return to original view | Post
#17
|
|
Newbie
0 posts Joined: Feb 2015
|
QUOTE(KLKS @ Apr 4 2015, 09:37 PM) From memory, I didnt use the ICSP, just used the usb, my buddy's melzi from china had the rrp or something firmware and we use repetier firmware. The steps i did to flash is Thanks for the step, do your friend melzi come with the printer or he buy the melzi board only?1. Download the repetier firmware (http://www.repetier.com/firmware/v091/index.html) 2. Download the arduino IDE 3. Download the sanguino board information for arduino from https://code.google.com/p/sanguino/downloads/list 4. Load the repetier firmware in Arduino, do the configuration.h changes, select the sanguino board (since melzi uses the atmega 1284p chip) 5. Upload firmware 6. Make sure everything works using repetier host 7. Copy eeprom settings from an existing melzi thats running repetier host to the newly flashed board read more at http://reprap.org/wiki/Melzi I dont use marlin so cant help u there |
|
|
Apr 5 2015, 11:56 AM
Return to original view | Post
#18
|
|
Newbie
0 posts Joined: Feb 2015
|
QUOTE(KLKS @ Apr 4 2015, 10:21 PM) He bought the melzi board only for his 2nd printer. i read somewhere that melzi you bought from aliexpress just as single board we can upload firmware into it and melzi that come with the printer kit most of them we can't upload firmware into it, because developer did something to the board already |
|
|
Apr 5 2015, 04:37 PM
Return to original view | Post
#19
|
|
Newbie
0 posts Joined: Feb 2015
|
QUOTE(KLKS @ Apr 5 2015, 04:06 PM) I've never tried to flash one that came with the printer. It may be possible they set the AVR fuse to disable re-programming, but i didn't see that as a fuse option for the atmeta1284p. Maybe try flashing via the isp headers? Thanks, i dont know what the site says LOL http://www.ladyada.net/learn/avr/fuses.html  |
|
|
Apr 8 2015, 08:34 PM
Return to original view | Post
#20
|
|
Newbie
0 posts Joined: Feb 2015
|
guys, do 200C decent temperature range for PLA cause before this i can print nicely without any problem to extrude the filament with 185C, but today new filament new color 185C seem not enough for the new filament to extrude without my motor skipped steps.
Are filament color will effect the temperature range? |
| Change to: |  0.0551sec
 0.49
 7 queries
 GZIP Disabled
Time is now: 26th November 2025 - 02:43 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.