When is the Cherry arriving?

Btw, any news on Ducky Year of Dragon?

Only you will want it. So you have to buy all to meet MOQ jk

PS/2 need to be plugged in when the PC is booting.
Otherwise the BIOS will turn it off.

That is ISO layout.
Looks like Scandinavian version

That's why you buy used(strip down) boards, they are cheap.
Maybe Rm50 for 100 switches.

PLUM, you get what you pay for. Ask lucidlts, he has a ton of PLUMs

I'd prefer the Pure, for the better layout.
LED i think only comes with the Alu version, standard version don't have. I can't confirm this however/

It's a personal preference.
But the Fn key is where i want it to be, similar to the HHKB. Together with the keys on the the Fn layer
YMMV

Last I heard, it was a once a month production run.
I think the tooling and stuff are focused on the KBT　Ｐｕｒｅ，　since they share the same casing and board size. I'm just guessing

I want acrylic top

The noise that the numpad makes is a little bit amplified due to the hollow structure.
In real use, it is not so noisy, especially the clacking sound.

And as always, if anyone wants to try the numpad out, shoot me a PM

Hehe. Faster let the Bulk meet MOQ

2nd person received the numpad.
Show me some pictures of Sabah please? I've never been to Sabah.

This post has been edited by kaiserreich: Mar 8 2012, 09:24 PM

Curly Fries 62g for Cherry MX modding
source: http://www.kbdmania.net/xe/index.php?mid=p...ent_srl=3741711
Comes in : 55g, 59g, 62g, 68g

Not selling it

EDIT: Fixed link

This post has been edited by kaiserreich: Mar 9 2012, 06:41 AM

Your mix is really generic. Imagine Ducky had to stop one production line just to make your custom switch keyboard
Ducky did made Mix switches before, but not in the way that you want.
Better off modding it yourself

Bumbung tak naik lagi.
So cheap, go support leh

Finally, an aluminum casing from the Western world
170 EUROs tentatively



SOS

This post has been edited by kaiserreich: Mar 10 2012, 02:08 PM

These are not Topre switch
BTC self design switch.

Layout looks like French ISO. You can do a key remap using "KeyTweak"

This post has been edited by kaiserreich: Mar 11 2012, 12:07 AM

If you want 80% similar to Realforce, the people at Geekhack had a long discussion about that, and they said a keytronic is close to a Realforce.
I tried a Keytronic before, and I'd say it probably is, but then I only press a few buttons, i did not try the whole keyboard out.

The target market for Topre is not in the crowd that wants backlit

Why do you even need stickers like those?
They would get sticky eventually and all the germs and bacteria on your fingers will stick on to those stickers.

Plus it looks terribly ugly.

200NTD to recoup the "$10 shipping worldwide)
Shipping from Taiwan to Malaysia for 1 keyboard via EMS is about 500-600 NTD

You can ask inpad to give you quoation via email, pretty hard to navigate their site
or to ask ArmyGroup to revise the shipping cost if you order a lot of small stuff.

Don't understand why 6gV2 and 7G has to have different layout, but you are possibly stuck with that set of keycaps for the 6gv2.
There are drop in replacement PBT keycaps for the 7G, but due to the right shift key, 6GV2 will have some keys that will look cacat.

http://item.taobao.com/item.htm?id=1014108...9_3z6_433362733

I know the picture shows 6gv2, but if you noticed, there are some keys that don't match.


Taobao is much safer than Mudah.
and while you can debate that ebay is better, I still find the payment with the Taobao system better.

Limiting to Keyboards via Taobao, it's pretty hard to get fake stuff, just extra shiny keycaps when you order double shots.

I'm glad that the keypad helped you make your decision.