bro .. urs also kena ???
i can actually detune the knocking.. some members kena .. but very rare case...

this happens only when i pump ron95. Ron97 no problem. When i reach 40km/h with second gear, i let go the throttle pedal and immediately press to accelerate, i can hear a short "kreeeek" sound. I when proton check, they advise me to use ron97, they told me that there are already a few cars have this problem, but they dont know what is wrong. So i send to my mechanic, he said it is engine knocking.

http://en.wikipedia.org/wiki/Engine_knocking

confuse....
Confuse again.....
omg... Potato play sifat till dunno how to differentiate guys n gal Liao.. @@

LAAAARIIIIII!!

this happens only when i pump ron95. Ron97 no problem. When i reach 40km/h with second gear, i let go the throttle pedal and immediately press to accelerate, i can hear a short "kreeeek" sound. I when proton check, they advise me to use ron97, they told me that there are already a few cars have this problem, but they dont know what is wrong. So i send to my mechanic, he said it is engine knocking.

http://en.wikipedia.org/wiki/Engine_knocking

bro .. urs also kena ???
i can actually detune the knocking.. some members kena .. but very rare case...

You're welcome Bro. Next will be reverse camera.

yes bro, i got. I think the problem comes with the car, but i only noticed after 1-2 months.

yes bro, i got. I think the problem comes with the car, but i only noticed after 1-2 months.

4B10 will have higher possible kena.. as we have 10.5:1 compression rate..

Adrian's car.. even before remap .. kena knocking d ..

i just check on the map .. yes.. from 2250rpm to 2500 .. the ignition timing is suddenly much more aggressive.. i think that causes the knock (some cars) ..

see which day u free.. come over my place (must be i free also la) .. then i retune that part we go have a ride.. until the knocking sound not there anymore... then we name it version 1.5 ... ... COPYCAT will tell u .. it is NORMAL ge la ..

very nice. I see what you mean regarding CF sticker. I'd prolly go for matte black, does it match with the other black linings of our car?
Calling all bros and sifus I need help

This is the other Inspira in my house, Silver 1.8 CVT.

Reversed into a lorry parked behind, apparently sensor didn't beep and driver didn't notice.

Damn damn damn siong wei.

As you can see from pic, Boot and Back bumper needs replacing.

I need recommendation on where to go, hopefully can get it done at an affordable price.

   

Please help. Thank you very much!!!

mijilin.... my car pelan chaio sound also got.... bila tune to 1.9 v..... now 1.1 very fucuk.

later i need to check 1 gear by 1 gear. usually low speed only kena?

Have you remaped and what version if you have? Please send the info the K3.

So far i use ron95 and dont have this issue even i'm running very aggressive mapping. Different car will have different character so might need to re-tune (i'm assuming you have remapped your car).

Best just come TT and the let macgyver test drive.

go for carbon rear hood straight la.. then Evo x rear bumper.. good to go..

You pergi cari dyno shop dulu la 

Upload now.

Pic taken during evening so the sun light not so bright.

---

Added on February 7, 2012, 11:56 pm

Thx bro for ur New Year Gift ^^  

mostly while i accelerate at 2.5k RPM. The most obvious is 2nd gear at 40km/h, as what i described, you let go the throttle pedal and immediately press to accelerate.
It has nothing to do with K3 mapping, i got this even before the mapping as what i remember.

4B10 will have higher possible kena.. as we have 10.5:1 compression rate..

Adrian's car.. even before remap .. kena knocking d ..

i just check on the map .. yes.. from 2250rpm to 2500 .. the ignition timing is suddenly much more aggressive.. i think that causes the knock (some cars) ..

see which day u free.. come over my place (must be i free also la) .. then i retune that part we go have a ride.. until the knocking sound not there anymore... then we name it version 1.5 ... ... COPYCAT will tell u .. it is NORMAL ge la ..

4B10 will have higher possible kena.. as we have 10.5:1 compression rate..

Adrian's car.. even before remap .. kena knocking d ..

i just check on the map .. yes.. from 2250rpm to 2500 .. the ignition timing is suddenly much more aggressive.. i think that causes the knock (some cars) ..

see which day u free.. come over my place (must be i free also la) .. then i retune that part we go have a ride.. until the knocking sound not there anymore... then we name it version 1.5 ... ... COPYCAT will tell u .. it is NORMAL ge la ..

yea, i also have, but only during jam when clutch and declutched a lot, actually i'm suspecting is because our car is too damn heavy and when you running on low speed not enuff torque to compensate hence the knocking, well at least thats what i think, usually if cruising and high speed not an issue...

mostly while i accelerate at 2.5k RPM. The most obvious is 2nd gear at 40km/h, as what i described, you let go the throttle pedal and immediately press to accelerate.
It has nothing to do with K3 mapping, i got this even before the mapping as what i remember.

ya ya, thats y i always only will kena when jam and 1st gear stop & go, when i hit around 2k+ rpm then suddently kena like engine nak jerk and nak mati engine...( is that also consider knocking)

but after remap actually much much less jor, i guess only if i hit certain rpm and conditions it will happen kua.....

where u guys bought the grill last time??