Ok lar. The rim spacer around rm70-100 std price. Alluminium one haaa. Dun put plastic

Dat one Taiwan imitation rims... i wouldnt rec 18" if you going for it...

imitation rim easier bent... somemore if u take 18 ... rubber sure low profile one... more easier lai ye.

18 imitation... even u use 45 also easy lai ye.... u can have a try first ... if bent trade in then go for 17 lo....

There is stuff liek Lenso, Advanti, etc if you dont want imitation... i would liek to think they are atleast more dependable.

Imitation 18", then you have to go for 45 profile atleast... 40 is too thin. Safer would be 17", but then again it also depends on driving style, I;m used to avoiding potholes and slowing down on bumps... some people just plough thru them and then complaint rims bent 

sometimes the porthole hard to see and hard to avoid ma...

sometimes the porthole hard to see and hard to avoid ma...

bbs for evo is forged rim.... tahan and light . but expensive and too width for our car .... and offset outwards

as for the link you show... rota is branded replica ..... original is this work emotion cr kai

save up more budget a bit to get a better one

turboja using 17 and 50 profile rate

JS will have the Falken 912 promotion lah.... a few of us using that

no la. Previously I was saying , saw bump must drive slow ma, tak kan we drive fast fast or fly over bump?

So now I drive slower than Myvi over bump and pothole. Rims are cheap, but tyre expensive....Imitation rim cheaper ma..I cheapskate.

But rublik original 18 also bend........2 somemore....

yesterday cant avoid a sewer cover hole which i think got almost 1.5inch and running at 100km/h but so far the 18" lft rims still good

kok fu seng....
he eat 1500 u apa macam mau lagi...

u go other shop see... eat u 1200 u also rugi.
gip ppl untung sikit lah....

If u think so you mah go try lor..... just curious which shop give/take u get a better deal? Pls share with the forum so other bros can get a good deal lah

Aron Crok...

try Lenso or Avanti there...
ori and beter bargain...

xai, me were lenso
metoo HSK were avanti

---

Added on February 7, 2012, 10:10 am

one thing is...
those Enkei cant repair..

but "ENKAI" can repair..

i strongly recommend AVANTI with MAT technology...

~.~ pls stair at HSK cheapo rims.

Har? KK? I live here wor.. which shop i can drop by see see.

As for the tyres... er... I think its 225/45/18... JS have promotion at RM450 each

If you're taking 18" better go for 45 Series tyres....

40 Series is just too risky considering the road conditions we have....

I took up JS's Falken promo at RM450 for 225/45/18 - serving me very well thus far, no complaints.....

How to determine the actual speed is 105?
Btw, aaron, no nd worry thr meter run la... If really will run, ppl won't use or recommend u use the tire dy right?

do you think JS only offer u the aluminium ring and nut?

you go KK change no need nut and ring?
maybe u could try welding... hehehhehhehe

if you pretty sure KK shop offer RM200 cheaper then JS, then u Tekan JS a bit lah, maybe discount another 100~150....
negotiable.... pls call HSK and learn Dummies Nego skill 123..

u stay stock pls...

LoL

Pretty honest... cause usually dun need new nut wan.... oh well...

I paid RM100 for the allu cone + full set lock nut (20 pieces...)

Some people have 1 locknut per wheel, the rest is normal ones... JS gave full set 5 per wheel locknut lor... plus the allu bits.. total RM100 lor

u know the price..

so if worth, then trade in KK then..

don forget the hub pls dont get plastic one..
actually the HUB thingy is to con ppl money one.

last time the camber nut, JS also try to con Xai with RM250++
sure they will try to gorek money from you one lah.

---

Added on February 7, 2012, 3:34 pm

对你爱爱爱不完....