Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Using lower-viscosity engine-oil in old engine, How to prevent white/blue smoke issue?

views
     
frankor
post Feb 26 2016, 10:31 AM

New Member
*
Junior Member
38 posts

Joined: Oct 2010


QUOTE(junfu1988 @ Feb 6 2015, 05:12 PM)
im having engine rod knocking noise and foreman say use thicker engine oil will solve that... is that true?
*
May I know what car you are driving?

If use Petron Blaze Ron 95 it will reduce knocking tremendously.

On the other hand if your car is using old Japanese engine (80s to 90s JDM type) than you may wish to give a try to Caltex Techron Ron 95.

If either Petron Blaze Ron 95 and Caltex Techron Ron 95 cannot solve your knocking problem then you may need to use Ron 97 petrol.

I believe (maybe I am wrong) it has nothing to do with thinner or thicker engine oil.

I owned 2 modded cars one is Satria with Mivec engine and the other Accord with H22A engine which both are high compression engine and it was suppose to to use higher Ron petrol eg Ron 97.

My Satria is currently filled with Caltex Techron Ron 95 and the engine oil is Hi-Rev 15W-50 (Semi Synthetic) so far so good no knocking but it need to change engine oil at 4,000 km interval.

As for the Honda is currently filled with Petron Blaze Ron 95 and the engine oil is Qmax 5W-50 (Fully Synthetic) so far there is no knocking and the engine oil will never dry-up or evaporate therefore I only change the oil at 8,000 km interval.

Pls see file attachment of the pics of the engine oils that I am using for my Satria and Honda.


thumbup.gif







Attached File(s)
Attached File  Lowyat_Hirev_Qmax.doc ( 325k ) Number of downloads: 15
frankor
post Feb 26 2016, 02:47 PM

New Member
*
Junior Member
38 posts

Joined: Oct 2010


QUOTE(TOMEI-R @ Feb 26 2016, 10:50 AM)
I concur to that. We have to admit it, for high compression engines like the honda B, H, F and K series, you would definately feel the difference on using 97 Ron engines. Lesser so for non performance cars. The feel would be different in terms of knocking (as discussed), a more smooter and quieter engine and better performance. My friends on the K series type R engines swear by Caltex Ron95. They said that the Caltex 95 is the best alternative when there is no Ron97. I am a ardent supporter of Shell fuel but whenever I pumped Shell Fuelsave 95 on my SSS, the engine knocks. So after recommendation of my friends, I tried fuelling up with Caltex 95 and it does make a lot of difference. There is still knocking, but much much lesser compared to Shell 95. Only issue is there are not many Caltex stations to begin with. I have not tried Petron yet. Maybe I should try once and see if there is any difference.
*
If you wish to pump Caltex Ron 95 (by using credit card) pls avoid Caltex (LDP) heading to Sungai Buloh/Kepong after the toll because there is a word "ofline" appeared in the receipt of the credit card transaction.

I wonder whether the points earned via Caltex Journey card will be recorded or accounted.

The problem with Caltex Journey card it will not shows the total points you earned after each pump.

If any of the forumer here is attached to Caltex pls bring this issue up to the Management.

icon_question.gif
frankor
post Feb 27 2016, 12:35 PM

New Member
*
Junior Member
38 posts

Joined: Oct 2010


QUOTE(junfu1988 @ Feb 26 2016, 05:17 PM)
Im driving an old toyota altis 06. the knocking is more like low pitch dek,dek,dek,dek that the the ratio increase due to heavier pedal. i assume it call engine whining sound.
*
I may be wrong and it look like the sound is not engine knocking or pinging but is either the ignition coil is mal-functioning or you are using the wrong spark plugs.

thumbup.gif

frankor
post Mar 1 2016, 05:00 PM

New Member
*
Junior Member
38 posts

Joined: Oct 2010


QUOTE(khairilyazit @ Feb 27 2016, 06:00 PM)
The Petronas Syntium 1000 is a Fully Synthetic 15w50 engine oil.
*
I wish to share about Petronas Syntium 1000 Fully-Synthetic (15W-50) and Petronas newer engine oil Syntium 300 Cool Tech (5W-40).

I have a Suprima (apart from Satria and Accord) and every morning I will warm up the engine until the temprature reaches 3 levels/bars in the speedometer before I drive the car.

Surprisingly when I used Syntium 1000 (15W-50) the car will reached 3 bars quicker as compared to Syntium 3000 (5W-40).

In short, my view (maybe I am wrong) that Syntium 3000 can take better heat than Syntium 1000.


cool2.gif


 

Change to:
| Lo-Fi Version
0.0208sec    0.45    7 queries    GZIP Disabled
Time is now: 17th December 2025 - 06:47 PM