Just bought MF61 but my handphone unable to connect it using wifi. password followed as indicate in the MF61. (i din do any setting or setup).

what have i missing now.


anyone can tell me?

ps. user manual NO IN ENGLISH..............

Why don't try E353 since it's just support 2100Mhz

already tested E353, "die" in my area,.. after overnight same symptom, it jump from UMTS2100MHz HSPA+ -> UMTS2100MHz WCDMA

that's why i say bigger device is perform better than usb modem and stable never DC in 48 ~72 hour straight

This post has been edited by chuahcs79: Mar 22 2012, 12:08 AM

Then stuck at WCDMA?

yea, that is the main problems.but i tested with maxis postpaid sim, prepaid sim, prepaid broadband sim, multisim and hotlink sim,. all is like that,. once go down WCDMA stucl there whole night..

no matter which device also same.. and i though if i run online radio or CMD pinger, it wil stay HSPA+, still end up switch to WCDMA anytime...

My will change to WCDMA when not using but once I use back it will change to HSPA+

that's why i am very glad i am moving to new area end of this month, tested in new area that is exactly like yours,..

That means don't get new modem first..
After moving that area test the network for few days baru only decide where need buy new modem or not

got a question here, the transmit power of the modem should more negative or less negative better? (e.g -3, -15 and -39)

edited: nvm, i found out more on RSSI and CINR
thx

This post has been edited by renishi: Mar 22 2012, 11:18 AM

yea check the RSSI, if RSSI bad signal, i think using more power and your modem is hotter,.

Want to ask?
Umg 1831 or icon 505 , which 1 has a nice ping?

in most cases, icon 505 will get lower ping than UMG1831,.. unless u are in perfect direction and connected to less congested nearer base station,..

Anybody using QXDM the Qualcomm eXtensible Diagnostic Monitor with GSM 3G modem ?

try to install from hhere

and it keep saying need IE 5 above,zzzzzz which i am using window 8 IE 10,...

---

Added on March 27, 2012, 5:05 amSomething to Boost your USB MODEM signal & speed:

Stainless Steel item Better effect than Past Strainer
Like mug with cover ( in the photo ) , or 100+ can drinks,

there is a few more tricks,



Tips :

some new experiments i just done for improve my USB modem signal,.

u need 1 stainless steel mug with cover & 1 usb extension cable

PLace it like the photo shown, and up side down the mug cover , place your USB modem on top of it and slow turn it a bit by bit to find perfect direction,.. it work amazing for me and my speed stabilize easily,. remember try to download a very big huge file when u tweak your stainless steel cover around to find best direction,

Note: sometimes best signal not guarantee you best speed,. best direction is more important than best signal,..



Stainless Steel Mug Cover + 100+ can

remember download big file in IDM while u tweak,.. u will see result on the spot when direction is perfect ^^, u will be amaze on how much these few cheap item can do for u

This post has been edited by chuahcs79: Mar 27 2012, 05:05 AM

Wow should try this sometime!

Want to ask if Icon 505M has any serious heat problems?

Both Icon 505 and Icon 505m is confirm Hotter than any other modem Due to using more power to gain better signal and Lower Ping,..

Stainless steel plate can ah?

---

Added on March 29, 2012, 12:54 amYahoo no need spend 100+ 4 external antenna.

This post has been edited by wkkm007: Mar 29 2012, 12:54 AM

any stainless steel item,.. it will really reflect the signal and concentrate it, try it when u download a big file,.. when the direction is correct, u will see higher + stable speed,.

haha it sure works could get stable -69 RSSI on my old E160.

glad to know

Remember to share this method to all your frens,.. anywireless, 3G, 4G, wifi,. all can use this stainless steel method