2.2-2.5k.

Fuiyoh not cheap

later plus engine+interior Fuuuuuuuuu new paint!

yerp..imagine:

l2s frotn bonet = RM450-500
l2s front bumber = RM450-500
L2s fender =RM150
l2s side skirt =RM150
L2s rear bonet =rm300
L2s Rear bumper = RM250-300
L2s tail lamp =RM100-120
L2s chromax headlamp = not sure the price...but more than 350..

survey from kcar forum n facebook kcar group.

maybe change the high voltage ignition coil...
service the carburator....
change the starter electric motor....
just some suggestion.

---

Added on May 22, 2012, 8:28 pmNo air filter!, the piston and piston ring will finish very fast.
It is better to use an original air filter (buy from the perodua service center , RM30 compare to RM15-non-original).
When after long use the air filter become dirty, clean it with Air Blow Gun.(blow the air jet from the filter's opposite side)



This post has been edited by tanhks: May 22 2012, 08:30 PM

---

Added on May 22, 2012, 8:28 pm
No air filter!, the piston and piston ring will finish very fast.
It is better to use an original air filter (buy from the perodua service center , RM30 compare to RM15-non-original).
When after long use the air filter become dirty, clean it with Air Blow Gun.(blow the air jet from the filter's opposite side)


i run the engine for 6 years oredi.. the turbine also dont have problem.. hahaha.. but i think i want to put some mushroom later on.
dont want any creature buat sarang if i park too long..

how to pakai ori from perodua if the engine already change to efi daihatsu engine? mane fit....
i'm currently also running without air filter after changing to td025l... ori hose from airbox cannot fit....

no air filter create louder surge sound.. hahaha..

hello,guys need help a bit,i want to rendahkan my kancil,front side,the mechanic told me to potong the spring,no need to change new,lowered one because got no difference, whats your guys opinion bout this?thanks in advance.

how much he charge for labour...??and is he good at doing so if yes then just do it....

better don't potong spring.... it will break ur back... how low u wanna get... stock spring around 4jari...
mine with proride sport spring n sport abs can get 2jari infront n 1jari at the back... i put 1" bushing at the back to make it even 2jari at the back... still comfort but not as comfort as standard... (with 14" rims ofcoz..)

agreed.. cut spring will lowered the car but still at the soft side.. better change. i use adjustable at the front and monroe at the back. keras mcm batu..

hi all..

new slk folk here..my kancil is 660cc 5-6 years ago..

i love my slk cuz petrol tank smal n save petrol..

he charge around 60,brand new around 130 he said.want a bit low only,to make it look sporty ,now using 13inch rims . Seriously if tukar springs there will be no comfort at all ka?

wokey thanx..gonna start with changing the spark plug first

This post has been edited by leftist: May 24 2012, 02:40 PM

Do not cut your springs. You will regret.

I advice L5 front springs. Slightly lowered, looks good, feels good, handles better than stock, not expensive. RM50 front only.

If you have budget of RM900 - RM1k.
I'm currently using HWL set. Serviceable. Adjustable front only. Feels great and not too stiff.

I've tried these 2 on my Kancil.
L5 before engine conversion is great. After engine conversion feels soft due to heavier L5 engine. So i opted for the adjustable HWL.


Cheers,
Jason

L5 absorbers for 50 only?wow,but where to find bro me not very good at finding 2nd items..

anyone wanna order parts? i go to chop shop today..

not preorder but can check for me got l5 front bumper white colour..??and the price...tq

in my checklist.. will help u to get the price.. i go to halfcut only for cuci mata only.. not specifically looking for parts.. hahaha