ya, look at their current series,
carbide, graphite, obsidian
sounds weird if named godzilla
maybe to match their size, almost like ultra tower cosmos ii

This post has been edited by unequalteck: Aug 24 2012, 06:46 PM

That thing is as big as cosmos 2.

hey guys

if im using standard atx size mobo(non micro or what.. just standard). and i want to use CM hyper 212 p/p or mayb CM 612(big size cooler)
i believe i need to choose the Dram(corsair ofcuz ) wisely as some of the DRAM (high heatsink) might block the cooler?

if yes , then normally which ram best for as if i want to use CPU cooler as i mentioned above?

Value RAM or if you want Vengeance then get the LP (low profile), same specs, value and price just with no high heatsink, so it wont black ur HSF installation.

by the way,why F12 no demand? compare to GT,its cheaper rite? pls correct me if my fact is outdated. plus,if i want to replace my 500R front fan,which fan should i choose?bitfenix ?

perhaps F12 is going to be replaced?? haha..seeing that many other fans are popping out lately, anyone got contacts to noiseblockers?

Try A.P.E.S.

New Corsair rig add to the league.

Intel i5 3570K
Corsair Vengeance 16GG RAM
Corsair 120G SSD
WD 1TB Black HDD
ASUS DVD/RW
Corsair C70 Black
Asus Maximus V Formula
Asus GTX680
Corsair AX750 PSU
Corsair H100 CPU Cooler

Added red led strip.




Try to do Push Pull on my H100, but not enough space.

C70 Watercooled by Cyntrix Technologies!
https://www.facebook.com/photo.php?fbid=431...&type=1&theater



This post has been edited by CyntrixTech: Sep 11 2012, 11:50 PM

looks awesome.but first,get a bigger table.your pc is seriously in danger of falling off.lol...

my 400r
just add 2 xigmatek 140mm fans at side panel


btw, kai5183 ur rig look very nice, i think around 4-5k right?

really nice, simple and good cable management.

@ bro legend86, can u order this for me? thx

superb, this case can support 2x 240mm radiator out of the box without any mod, recommended for watercooler

It's hard to get a 240mm on the roof without lots of adapters. The radiator in/out if placed towards the bay will be blocked by some internal hardware. The distance between the in/out to the bay is too close to even route a tubing + having enough tubing to push the bay res out for drainage. This casing can only support 2 x 240mm if you go with cylindrical reservoir or use a lot of adapters. Sadly, it's not an elegant solution, not what I thought it would be compared to 692A.

how if using the 2nd and 3rd bay for bay res+pump? sacrifice internal odd lo, use usb odd, like me

You still need several adapters. But with the bay on 2nd and 3rd slot, there's no need to push the bay out to refill/drain.

What do you mean by "lots of adapters"?

i think he's referring to 45' and 90' rotaries?