So in other words, cannot open la is it?
Coz if got way to open it then seal it back, i want to modify some LED inside.
Well, I think I will just buy a new set, then this damage set I will use as guinea pig for that LED project.

This is a common problem for the earlier batch of LMST cars. My recommendation is to change both your rear lights to the newer 2007 LMST model lights. Confirm the lights won't have water leaking in anymore. Owner of both 2004 & 2007 LMST here. The grey rear lights will always have water masuk, no matter if you change to new one.

If you want ideas on how to DIY your LED lights, join 4G1 Series forum on Facebook, there got one member did LED lights for his rear lights, quite nice but pricey.

Yes he DIY mod led into LMST backlamp... fitted into his old saga... not LMST ... he's here in forum too but not so active... forum nick stasis21 ... in facebook... Ali Jim...

http://www.facebook.com/photo.php?fbid=101...&type=1&theater



Final preparation 2mrw kasi kao tim all... btw... this layout freaking many corners... need lots or torque to get out of it fast 

http://twitpic.com/8sueki At MRR 2 highway.seems that after I gotten this S flow exhaust setup, I lost 10km/h from my max top speed of 165 km/h (+3.4%)

and btw,
maddriver's custom shock absorbers + IMPROVE brake disc rotors + Rapidstop 550 degrees brake pads = BEST f***ING BRAKING SYSTEM I'VE EVER EXPERIENCED!

i will be putting out a review on my website hopefully by tonight later on after work XD

Bros, can give me link or not? Cannot find la at facebook. takut salah orang.

Which is why even i upgraded to bigger brakes i still go back to Rapid Stop    my previous Proride brake disc rotor cross drill slotted + rapid stop 550 degres brake pad also veli nice... too bad im too greedy  and erk.. your car milage only 29k? 

god damn the brake pads are so godlike rofl.
the bites are so precise... and even after brake fade during yesterday's bedding in, in around a minute it f***ing recovers
though it isnt so great at the end of the day cuz the rear drum brake is still pretty f***ing dead ROFL!

anyways a rough calculation (or even minor documenting) on the spending thus far (in rough/rounded figures):
- exhaust: 800 (high 700's)

- LCP 500

- absorbers/mountings & o-ring/aircon tensioner bearings/rstop pads: 1100+

- semi-slick tires + rotors + workmanship (rotor/brake fluid flush/drum cleaning and adjusting) + steel rims: 1600

- misc. track: helmet and entry = 200

pending:
OCI + gearbox OCI + RCL/octane booster + gearbox gasket/oil filter change estimated between 400-600 (ill take 600 top figure)

total so far including pending = 4.8k.
called bank and will be arranging on a transaction's flexi payment. 3% up front interest (im re-financing the absorber charges of 1.1k, so im feeding bank about rm30-40ish /sigh)

Don't think so man... Just curious, why want to mod to BLM dashboard?

Coz it got nicer look ma + already built in double-din + differ air-cond system.
Actually bcoz of the look la. Hehehe.

---

Added on March 7, 2012, 2:26 pmOne more thing, what is other belt in our engine?
I just change my timing belt then my mechanic said rather change other belt too for safety.
So what I want to know is, what are the name of other belt so that I can look for it @ I can ask spare part shop to buy it.
Huhuhu...

Yah, the design is definately more modern. However, there's a lot of things to be considered.
1) Air cond ventilation connection points
2) Length & width of the BLM dashboard against LMST
3) Can the two front doors close properly against the BLM dashboards?
4) Will it affect the firewall / soundproofing effect?
5) Will your meters & buttons be compatible?
5) Costs involved

If you want a double din player, just get those DVD 1-Din units that can retract the screen in and out.
Would cost you RM2k - RM3k for a good branded unit, and you can transfer it no problem next time to other cars.
Looks wise, if you wipe & maintain your dashboard every month with a nice dashboard / leather / vinyl protector, your dashboard will look new and berkilat all the time. I do this and I'm satisfied with the dashboard dy.
Now just waiting to upgrade my ICE + headunit to better ones.

You can also check out Codyx's ride. He did some nice updates to his LMST dashboard which makes it very cool.