Yep, 30Mbps and 20Mbps UniFi WAN Load Balancing with mikrotik 

Currently using CCR1016-12G, use powerline and place another router on different floor.
Your area crowded with wireless AP ?

Btw, what do you want to achieve? 

Just got my Unifi 30mb activated. RB2011UAS. Speedtest from dining room, middle of the house downstairs,. Router is located at the back room upstairs next to the back window. Distance about 25 feet diagonally through floor and walls. House is 20x67 terrace intermediate. Not too bad, I guess. Hopefully it'll give you an idea of the Mikrotik's wifi performance but if you're living in a mansion then all bets are off. :-)


Dining Room

And a few more tests.

Living Room (Sitting on sofa, it's faster if I stand up)


At the gate outside the house.

Haven't speedtested upstairs but the worst is the front toilet which has 3 walls between the router and where I sit. :-)

Surrounded by wifi. Back of the house is not the best place to locate an access point. The -54 is my neighbour's router which is practically right next to my router but on the ground floor.

Mine's the other way round, router upstairs to downstairs, 30mb no prob. I think mine would be better if I had located the router in a more central position but as things are, it's at the back of the house. The RB2011 that I'm using has external antennas though I don't know how much of a difference that actually makes. You're using RB951 right?

I'm using 500mbps Powerline from Aztech to run HyppTV from my router down to the TV. If your house is single phase electricity, should be no prob. I did a speedtest for the powerline when I first set it up and the speeds were very good. I didn't save the test results but I think I got around 300mbps.

Mikrotik just launch their hap ac Lite

http://routerboard.com/RB952Ui-5ac2nD

Size of RAM 64 MB
10/100 Ethernet ports 5
Wireless standards 802.11a/n/ac
no wireless g...

waiting for hAp AC (not ac lite  )
don't worry, its still support wireless b/g

+- rm 200 good as repeater

There're a few WTS here for the Xiaomi Mini at RM120 but its LAN port is only fast ethernet.

IMHo, the best option for now with a Gigabit ethernet port is the DLink DAP-1665 RM278 on gemfive.com.my with a 30% discount = RM195.

Xiaomi Mini is good value. I was considering it when I was looking for an AC AP but the fast Ethernet port is no good if you're planning to transfer stuff from a PC. Same goes for the RB952U-5ac2nd.

The RB3000 series looks awesome 10xGb ports n USB3 but is the 1GB ram a typo? That's crazy. The RB2011 had only 128mb. That's a big jump. Not that I mind but price will probly be high.

License given at the MUM is L4 which normally sells for USD45.
But this one only 2.4Ghz, if 5Ghz should be:
RB3011UiAS-5acHnD or
RB3012UiAS-5ac2HnD

or preferably RB3012UiAS-5HacD2HnD

This implies that only Nv2 supporting and enabled devices can participate in Nv2 network.

Regular 802.11 devices will not recognize and will not be able to connect to Nv2 AP.

If got USB port can link to USB Modem which can trigger the SMS function

anyone know how to block DNS attack ? mine seem super high at 50-70% usage

Due to popular demand, we are giving out free RouterBOARD hardware gifts to all already registered attendees and the next 100 people to register, with any type of registration (free, voucher or paid) - you will receive the product at registration - you must attend the MUM to receive it.