I believe your chip getting hot.
Blow a table fan and try memtest

I believe he not only had the best TCCD, but also awesome good memory controller

hehe.. he did that on another friend's CPU.. his own cpu only got him 300mhz or slightly higher..

i have a feeling his pair is going to be a very good kit on my venice

for some reason i feel down
as my mem controller only works with 200 n 166 devider..
n for some friggin reason, even 1.7v at 9x300 [ddr500] unable to run sPi 1m =_=;
thats y im thinking of trying 1:1 ddr600 kit, be it 1gb, or 2gb kit..
hope can get it run at 2.7?
how bad is a bad mem ctrl'r ?

This post has been edited by e-jump: Jan 3 2006, 04:57 PM

a 'not so good' memory controller is
- not very flexible with divider options
- overclocking capability does not perform up to average like others

2GB DDR600 kit? lol only ram that does it is Crucial Ballistix PC4000

sometimes it's not the voltage that matters.. it could be cooling, motherboard, PSU, ram, CPU limit etc that affects your overclock.. so pumping excessive voltage might not help at all.. and will even create certain negative effects on your system

edit : btw.. anyone felt the forums faster than before?

This post has been edited by babyelf: Jan 3 2006, 06:46 PM

yey to my 350w truepower with single 12v@16A
guess this is the culprit


but, it cost more than ur ddr500 uccc
unless u got source

oh well, hope u can fire up the new batch team sticks n get some interesting result to finalize my decissions

p/s: what happen to team tccd ddr600? no more?

heh i can get the ballistix if you need it.. expensive tho..

there's no DDR600 TCCD in this batch.. I can get some in the next batch..

in this case, can we consider the proc as faulty??

not faulty..

usually better memory controller only comes on more expensive processors.. but if you're lucky u might get CPUs like venice week 17, opterons etc with very good memory controller..

proC is not faulty when it can run at stock speed with recomended voltage..
n im sure at stock setting, all deviders might work
and they never claim it can be overclocked to certain extent.. its juz a bonus


1gb or 2gb.... haih~ @_@

faulty = cannot run at all
cacat = cannot run at default speed/setting.... should request for RMA

at 228mhz now...
BUT at 2T....
whats the difference between 1T and 2T?

Bandwidth, its a total waste for BH-5 to run @ 2T. At any circumstance, it should be 1T all the time.

This post has been edited by Hyde`fK: Jan 6 2006, 03:35 PM

Someone pls explain

ive once asking expert here & wat they said :

"running 2T is running on the 1/2 from actual speed"

http://www.amd.com/us-en/Processors/Comput...5E13335,00.html

i can run 1T at 1:1 divider but when drop to 6:5 divider, it can't....

mana feedback/review/result for 2gb (be5) fr ur bulk?
since im interested

lol.. only gengstapo have it so far.. i'll try to get some other results for u from else where