WELCOME TO INDONESIA GUNPLA BUILDER WORLD CUP (GBWC) 2011..

==============
Well I see Freedom


I also see Sandrock


I think I will expect to see the same thing on Malaysia GBWC 2011

This post has been edited by ascentic: Nov 8 2011, 04:33 PM

i just buy my 1st gundam. but should have ask recommendation in this thread 1st

i buy this - MG rx-78-4 gundam g04
im searching for 1/144 bcause i want big but i nver assemble before so i should try smaller one..most of the thing sell there is 1/100
bigger box rm300++

1/100 is around 7cm ?

gonna do it tonight

No 1/100 is about 15cm+. You also bought a MG kit as your first kit. It may seem advanced or a little hard for u though.

G-04 should be 18cm; the smaller the number after the "/", the bigger the kit will be most of the time. If you just start, HGUC/AW/FC/AG 1/144 is pretty much recommended Or if u can't find those, go for 1/100 from 00 series

thanks .. u sure that 1/100 is 15-18cm
bcause i saw the below rm60 .. something like mini gundam is 1/100.. nt sure bout that

btw what is the biggest size of gundam ?

This post has been edited by shark7: Nov 8 2011, 07:54 PM

Yeah, if u're talking about MG RX-78-4 G4, definitely 18cm or slightly taller due to extra armor. Generally MG from:
- Seed/Destiny, 0079 series (that has rx-78 Gundam variations), G-Gundam series - avg height = 18cm
- Zeta series - avg 19-20cm
- CCA series, incl Unicorn series - 19-20+cm; basically they're among the tallest in MG lines
- V, Crossbone - 15-16cm; shortest within MG lines
- Wing seroes - 16-17cm
Above are for MG

As for 1/100, if you combined new and old series the height may vary. May I know that 1/100 mini gundam u mentioned, what's the name of the kit?

i can't remember the name of the kit but what i know is the box is small, and its like big head iinm n scale 1/100 - im not sure,i think i look it wrongly ..
can't remember bcause i wass looking for scale 1/144 but din't found (is not that i dint found,i only find like 3-5mins), i only see 1/100 and suddenly there more ppl coming there so i just take the one that looks nice

and i take MG because i heard that is one of the good grad

anyone know the estimate price for gundam scale 1/60 ..its around 30cm iinm .
i want that big...

This post has been edited by shark7: Nov 9 2011, 01:05 AM

in Lowyat already got.
Don't remember the price

mgs2u offers rm141.. wanna survey around then only buy.. i think BTS shud be cheaper..

don intend to collect Wing series yet. gonna control. only interested in FA Unicorn. LOL. but yeah, ctrl...YEN too high.

need to clear my backlogs first now donno how to spray flat on my exia....cannot disassemble also. ish. no masking tape also. ish.

maybe jz take a4 paper to cover. LOL

lol, that's SD kit that you bought, and for RM60, that's really costly.

Unfortunately, SD kits don't come in scale. Hence the name "Super Deformed".

This post has been edited by Harddisk: Nov 9 2011, 08:47 AM

hahaha... last time I got face same problem.. when I wanna top coat.. need to remove all the clear parts summore.. already very lazy.. and very thigh.. need to plug out oso a problem.. so I just let it be la.. than i remember masking tape.. that time I also no buy haha.. so end up just spray on la make the kit looks abit old haha...

Don worry so much. I also start gunpla with mg. Red frame. Still if I follow the manual closely will never be problem

ffffffuuuu mgs2u promotion today
RM1.60 for decal

A noob question - where and when is this years competition being held? I hear there are two different venues this time - one at Sg Wang and one (junior category) at Mines?

under which category? bandai or 3rd party ones?
all i seen r still normal price

yupe, 2 venues

3rd party one
hmm metal transfer decal is for what?

i thought got only dry and water slide

How to use Metal Transfer Sticker:
1.Clean up and try the surface of Metal ,Glass, Plastic,PP,ABS,Wooden;
2.Gently peel the adhesive gemstone off by hand or clamp. Apply to everywhere you want. 3.Gently press softly the sticker on the products.

got it from here

I can say that, Metal Transfer decal is a dry transfer .... if you wan to know more... it's from HEre..

This post has been edited by ascentic: Nov 9 2011, 10:30 AM

Guys, Gunpla sale on HLJ now. Tempting price price for EX-S, but the shipping kills it all.

1/48 Mega Size MS-06S Char's Zaku II price looks good. 40% discount, but don't know how much will it become after shipping