lol, im a bit jealous. all the step i already done.. and im not using s2e for now..
im always do and wipe everything before flash.. im trusting fresh install than upgrade method. weird thing that happen is while powering off loading screen, it show status that im unmounting my sdcard. Then powering on.. it shows corrupt sdcard. something wrong happen in the process. zzz

i dont think my phone or my sdcard brick :-(

If you have problems with /sd-ext not mounting (with "Invalid argument"), and formatting /sd-ext in CWM doesn't work, just do a manual format:

Code:
with adb shell :
$ adb shell mke2fs /dev/block/mmcblk0p2

or

For a manual format open terminal and type
su
mke2fs /dev/block/mmcblk0p2

If the system doesn't allow due to data usage in the ext, wipe dalvik-cache and redo this procedure again.
I did this too, and everything is fine.

Thanks alex, but that command only if you using ext or second partition. im not using any. just 1 fat32 paritition. :-(

forget it. i try this once again. hope this works.

This post has been edited by curiouso9: Sep 24 2011, 08:55 PM

So how's the v1.4 so far? I am attracted to this version by the wireless which supposed to be better xD
Any special steps i need to do if i want to update to this version from ver1.2 hotfix 2? (i am currently using link2sd as well)

how about s2e in this new update? is it really ok?
if not, i will stick with link2sd...^^

actually what difference btwn s2e and link2sd?
s2e more better rite?

Since you're on ver 1.2, you will have to disable mad2sd first :

Using Terminal Emulator :

#su
#mad2sd off
#reboot

1) Install v.1.4 , hotfix1 and gapps.
2) Perform wipe battery stats.
3) Reboot.
4) Install S2E and perform the settings as according to Psyke's guides.

Done.

Note : You need to have Ext4 to use S2E. If not then you'll have to use Link2SD.

---

Added on September 24, 2011, 10:29 pmS2E is more advanced and perform better than Link2sd. But it needs Ext4 to function.

This post has been edited by alexysc: Sep 24 2011, 10:29 PM

i thought i already disable mad2sd before ? do i need to do that again? (i am not sure which version i am using) (i remember it was before the version before the hotfix 3

i had ext4 partition using CWM before...
how bout u alex, do u use s2e or link2sd in this new update (v1.4)? ^^

You can check if you have or have not disable mad2d :

Terminal Emulator -

#su
#mad2sd

If you've disabled it, it'll show something like this :

* swapon - enable swap
* swapoff - disable swap
* tweak - tweak drives for speed

MAD Team ROM status :

Swap Size : xxxxxxKB

Don't worry about those stats. I don't have swap partition, but it shows my swap size.

---

Added on September 24, 2011, 11:05 pmYes, I've migrated to S2E from Link2Sd....and it's now working great!

This post has been edited by alexysc: Sep 24 2011, 11:09 PM

My Freespace using S2E

I've installed about 100 apps and still have 115MB free !

This post has been edited by alexysc: Sep 24 2011, 11:14 PM

nice!
im going to update after this...just finish download the update...

when uninstalling the link2sd, dont need to move all apps rite?

Better do a clean install as this v.1.4 is entirely a new rom - deodexed.
This means,

1) Wipe data
2) Wipe Dalvik cache
3) Wipe battery stats
5) Do a manual format of ext4 partition :

Code :

Using adb shell -

$ adb shell mke2fs /dev/block/mmcblk0p2

or

Using terminal emulator -
#su
#mke2fs /dev/block/mmcblk0p2


4) Install v.1.4 , hotfix 1 and gapps. (better install the usual minimum gapps - official: minimal (20110613).
The first time I install the full gapps and it required a lot of space till my memory remains only about 50+ MB!

Then install S2E and perform the settings as according to Psyke's guide for S2E.

Then re-install your apps. You can back up with titanium and re-install back, but I don't use titanium as it sometimes may mess up the data files.

EDIT : I did not move my apps before uninstalling Link2SD. I just uninstalled it.

This post has been edited by alexysc: Sep 24 2011, 11:34 PM

means uninstall all my apps before uninstall link2sd? how do i perform step 1,2,3 and 5?

No need to uninstall your apps. Just uninstall Link2sd.

Use CWM to perform all those steps except No.#5 which you use using your phones's Terminal Emulator.

This post has been edited by alexysc: Sep 25 2011, 12:01 PM

At which step do we uninstall the link2sd? at the beginning?

Yes.

Done Thanks a lot. At the S2E, i ticked all except for download cache right?

---

Added on September 25, 2011, 4:27 pmdo i have to install the S97ramscript again?

This post has been edited by starz92: Sep 25 2011, 04:27 PM

Yes you're right....except download cache.

Check if your S97ramscript is there :

>Root Explorer > system/etc/init.d -----> if it's not there, then re-install again.

Can the S97ramscript be applied for other android devices? I have a China generic Android Tablet running Android 2.2. So just curious if it will be ok for that?

Your device needs : Root and Kernel which supports init.d

There's no harm trying because this is a script.

On your device, open root explorer, go to > /system/etc/ ---> look if init.d folder is there or not. If not,
you can try creating a folder and name it init.d. If you can't create, then your phone's kernel doesn't support init.d.

Btw, stock froyo rom too doesn't support.