nice case...

i do have a question, what if ur psu already out after 3-4 years of service, then can change the PSU into a different brand or higher watts? i know it can be change, but i dunno what brand? can tell me which manufacturer specializes in making SFF PSU

normal Sugo or with the windowed version

looks pretty neat...ever thot of sleeving the multicolored wires?

Very nice. I tried to hid all those wires behind the tray but most of the time there will be not enough range for some wires to connect with appropriate hardware.

My rig,


[attachmentid=195638]

[attachmentid=195639]

This post has been edited by SEP910: Feb 19 2007, 10:51 AM

nice job on the routing the wire, sleeve a bit la --> more nicer looks

hmm . very nice indeed the only problem is the 4 pin mobo connector ...

need to sleeve but difficult to be done .. i am using the liberty series as well...

overall really attractive look

The final cable route is actually neater than what you'd see in the pictures I took. But there is little room in the casing and folding the ide cables was a PITA. I've given all my sleeving and modding stuff to ianho, so I don't plan on sleeving the wires....besides...there's no window...and it's a HTPC..who the hell cares how nice it looks inside as long as it looks neat and there's enough room for good airflow, i'm cool. I might get some spiral cable wrap from dollar store next time. Will take a few more pix after I upgraded my hsf (in a week or two)

As for the psu, silverstone sells the replacement model, i'm not sure where to get other compatible psu, but psu will last very long time...it's just the fan that'd go kaput.

I still havent received my mobo for the sugo...that's gonna be a big PITA to manage since that casing, similar to my lascala lc-11b, has little room for cable management.

still ok rather than me.

Mine was quite messy.

dude, u can start by sleeving the silvy up.... re-routing d cacings myt b very tricky but sleeved cacings usually behaves better...

forgot to read somemore... ahaahaha... btw, sleeving is not all on aestatic purposes... kamon, post teh latest pic already... like to make us wait lyk wat ianho does best... ahahahaha...

This post has been edited by r4ydc24: Feb 23 2007, 08:22 AM

ill take some pictures after i got my new heatsink. My friend just shipped it to me, should be here by end of next week. Regardless, I really like the casing, it does a good job filtering dust. It gets really dusty during winter over here, and my server with a RM100 casing I bought from Msia would usually be filled with dust within a month....but the silverstone has little to no dust in the casing after 3 months

my setup.. not my best but quite satisfied with it :









This post has been edited by SHOfrE3zE: Feb 25 2007, 08:52 PM

it looks nice ... can u show photo with further view as can't see the casing itself...

really nice tho... hmmm dam sure.. thats not power logic casing rite?

erm...SHOfrE3zE,wht psu do u using...is it pre sleeved psu?...
btw,nice...

I believe it's a Thermaltake Casing.

Here's my ThermalTake Tsunami Dream. 14-year old amateur cable management, I guess Can't expect too much, right?

dont mind me saying so....its a little messy...some sleeving and recabling might help...and if ur serious abt ram cooling, that cyclo isnt going to help much, you'd be better off getting the ram coolers frm one of our forummers

This post has been edited by cablesguy: Feb 25 2007, 03:51 PM

Oh well, at least I tried, right? I'll be doing a little sleeving after my first term exams now, just might be able to improve on the ATX power and CD drive molexes. I've done my best on hiding cables so far, guess I'd have to send it to ianho if it were to get better. As for RAM cooling, the Cyclo is mostly for the bling bling factor, coz I already have Cooler Master Copper Heatspreaders Might be upgrading my CPU heatsink to the TR Ulra 120 soon too. Who knows? Thanks for the constructive criticism though, mate. Appreciate it a lot!

Sending to Uncle would be shortcut ... the best is u learn it through different attempt .... from there u would get the satisfaction ...

unless those serious cutting job then u send to uncle.. cable management only take times and trials to get it done ..

so far i really like the way ur sata cable wrap around the pata cable .. looks cool with UV CCFL ... plus ur Iceq2 cooler that UV reactive as well ...

hmm it would turn out nice when u get the sleeving done ...

True too, but at the end of the day, even if I try for days, the real true and FINAL satisfaction would REALLY come from : Knowing that the job has been taken care of by the best expert available, thus the best results possible. I will try again though, thanks for the advice.

The SATA cable? Lol, I did figure it out after some time coz I didn't really enjoy the way it was curled up beside the IDE cable, looked kinda fugly My HIS GC cooler is merely the IceQ, not IceQ 2, so I don't think there's any bling-bling factor there I'll be starting on UVing everything soon, once I get my hardware mods done. Sleeves, molexes, fluorescent stickers, fans etc. etc. YOU NAME IT!!

Thanks again for the comments, Doom!!