wow.. haven't seen the case for while ...... where's the white CCFL men ??

really miss the look ... and effect...............

It's time for him to come home to Ah Lian. That's y he's posting last kopek pix of the old Akasa case.

haha its there, but maybe he used flash in his pics

Yes..the house of Lian Li beckons...must resist temptation... V1000....

Naw...took out all bling items di...no ccfl..no led...no nothing.

aiyah, cant imagine ur rig without bling la.
faster go chuck some in
but the cables are very neat. not like my lian li ><

Resistance is futile! Surrender now!

This is my pc before WC

This is my pc before WC and sleeving
but still its very neat

This post has been edited by cstkl1: Dec 8 2006, 02:29 PM

With Water cooling and Sleeving,

Actually is dont think theres anyway i can make this neater except for the ide molex cable which is sticking out

Sorry was using my phone camera...

Please comment...

This post has been edited by cstkl1: Dec 8 2006, 02:34 PM

Hi cstkl1 I notice something , although your case cable is superb but the cable at the outside of your case

Overall, nice and tidy

oh that actually this is not the original comp position i turned it to get a pic of it. i have wire harness on the back of the desk to tidy the wires.

in the pic missing my 2 external hdd and colour printer. the one in the pic on the ground is the black and white laser jet. so

actually will be very messy indeed..

This post has been edited by cstkl1: Dec 8 2006, 03:02 PM

This is cable management section ...so i guess cables out side the case also count .... just joke

anyway the case looks superb ..... cable management hard to judge since there arent much cables.... only tubes

actually now that u mentioned it. not really happy like so much obstruction from the front fan to the rear. was thinking of changing the pump and tank and place it the out side of the case.

cause the mobo temp is still the same and is like 5c higher than the cpu.
is this because of the water cooler??

on the ligher note. gpu on full throttle was last time at 61c and now is around 55c
that is still puzzling as to y??

does that mean when i was using my stock amd cpu fan the heat was being blown to my graphic card??

Because there is not enough of air flow within the case ...... the exhaust fan is not enough as ur chipset used heat pipe ... there is no moving air across the mobo area... ur gigabyte cooler fan is too low ...

so add a fan on the mosfet heatpipe???

actually the mobo comes with one ....the gigabyte cpu mosfet cooler i think more for show only.

hmmm so any recommendations??

This post has been edited by cstkl1: Dec 8 2006, 05:24 PM

btw cstkl1 , what Watercooler is that?

think not mistaen its the gigabyte galaxy 3d water cool set

It is recommended by some of the review on the mobo to have the fan installed to keep the chip set cool ... since we aren't staying in country that generally has lower temperature...

That's Gigabyte Galaxy 3D WC kit ....

Maybe the new version 2 somemore ... can't see clearly ... the photo is kind of small

This post has been edited by Doom: Dec 9 2006, 12:15 AM

hmmm but if i install the mosfet heatsink cooler , that means i have to take off the one on the water block..

yup its a gigabyte galaxy 3d ii.

actually this is the first time i assembled the pc from scrath on my own,
first time sleeving,
first time cable management,
first time water cooling
first time overclocking too.

for the water cooling set i chose this cause i thought it was a good entry to water cooling with decent performance, also from the setup so far i think if i was to upgrade it would be the pump, tank and maybe the waterblock since the tubing seems to be a good quality and the radiator is in an aluminium casing.

saved some dough for a year and made sure i bought parts that i can fully utilize in the bios. going sli however was not was i aiming for but wanted an sli ddr2 mobo.
saying that however i dont like the soundmax audio. wondering y they didnt use the realtek audio which is more customizable and better sound.
will post a higher res pic later cause need my bro laptop for the memory stick since i dont have the usb driver for the dsc t33 which is a pain to find.

again is there any 3rd party mosfet heatsink cooler anyone can recommend???
cause prefer the mobo temp to be same or lower than the cpu.

well tht's a huge list of first time, i still don't have the heart to sleeve my psu scared i will make a mistake removing molex, my cable management sux, can't afford WC kit, but can overclock