Nothing to comment bro ... u have adopted the most straight forward method ..

Spiral wrap ...

It's good if u find the spiral wrap in black rather than grey .....

There's also other type of plastic wrap selling at ACE Hardware or IKANO Power if not mistaken .. .

But so far .. excellent u have utilized the power of spiral wrap to the max ..

godlike ....

hahah, u are giving preview arr ???

Faster post your rig dude ...

hehehe .. finally the long awaiting A10 is arrived with awesome setup ..

So far so good ... looks good ..

btw, can't u route the 8 pins mobo connector behind the side patent fan ..

I did mine last time by routing through the opening between the mobo and graphic card ... then straight up to the connector ..

not sure ur setup can do the same or not ...

yah hopefully it's long enough loh ...

if not I really have no idea where u gonna get 8 pins extension..

probably two 4 pins extension could works as well ..

arrr ... !! I've nth to play around now .. everyday stick with the same setup ...

What I did with my A10 last time is to use the extension ..

so whenever I wanted to remove the mobo with the tray I just disconnect it..

Still consider removable right

Hope he akachester could get the extension that fit nicely ..

@ltcbomd
Bot bad, BTX mod it and it would become even brilliant....

@karthyhu
It's a bit hard to source for that extension cable ...

This is what I did last time for graphic card

Cost me less than RM5 to get it complete .. .



So just try to get the right connector, pin, wires and it could be done with a crimp ... btw .. could get industrial heat shrink at the shop as well .. very cheap only ..

Basically very good job ...

btw is the CCFL necessary ?? I just feel that it's kind of in the way ..

it block your sexy 3870 men ....

btw, off topic .. does CF 3870 really prove actual game boost and estimate by how much in rough percentage .. thanks .. has intention if the performance boost is promising.

@AoiNatsume

ic thanks for the info ... coz I just don't feel like going got 3870X2 that's hot by nature and would take some times or probably no third party cooler for it due to its design of dual core on single PCB...

I was so depress after played The Witcher for while and realized as I progress the lagging is so obvious with 3870 compared to 2900XT that forced me to downgrade the graphic setting ..

which for me it's not acceptable given choosing ATI over NV is for its better image graphic rendering.

btw is the stock cooler UV reactive ??

Given the limitation of the CoolerMaster PSU .. u already did a good job ..

no critique could be given apart from sleeving the PSU pllzzz ...

The sata cable would be just fine ...

btw why don't just get two identical L-Shape sata cables ??

It's easier to manage

probably changing your rom to sata interface could get rid of that thick IDE cable...

It could be better without the IDE cable and the Thermaltake fan really got messy wires ..

I hate that fan ... Got two last time and just dumped it away on someone else rig for free ....

btw it would be nice if you could get some black SATA cables .. that would reduced color contrast of the mobo and PSU cables .. .

heheh .. no need to comment anymore ..

you have reached the pro level ... loh ..

neat, tidy and steady ..

MOdular PSU make cable management easier or not really depend on the type of case and routing mechanism and spaces to hide cables ...

It's all depend on the case most of time .. modular PSU is good in once case but not the rest lll same goes to standard PSU ...

It's all about planning and execution ..

@limhongwoon
I've no idea, probably u could ask AoiNatsume since he works for her shop ..

@rainingzero
you are absolutely correct, they are called enthusiast because they deal with their case each and every time ...

only minority customer who are loaded of cash in pocket would pay premium price for both hardware and services ...

Try to tie several cables into one so that it doesn't lying around here and there ...

use some wire twist to hold those cable nicely ..

I did cable management for one of the forumer before in this case ..

It has no place to hide cable, that's why organizing route of cables is the key to manage cable in this case ..

Have all cables route nicely and tie together then use the other side of HDD cage to hold those cable as straight possible.

This won't give u wifi kind of cable management but at least it's neat .

@samftrmd

All four pictures that u posted are not the same setup right ??

coz each got different set of hardwares ..

btw, just personal preference ... I really hate PSU cable being twisted and wrapped around and hang like a piece of banana....

It's really awful method that used by most PC shop assembler when dealing with package machine ..

So far so good, just work on with some sleeving and routing cable for a more neat look..

@mcfm

Hahha, after so long of waiting finally u are almost settle with your mod

Nice window and UV theme,

btw, just replace the anti slippery mat with something else like Acoustic Mat ...