@KongorJr., can you download MSI AfterBurner and Furmark and run those at default settings and see the graph on MSI AfterBurner, whether its constant speed or not?

@Ikmal91, foir now, wait.

Doesn't seems got people complaining similar problem with two previous gen Asus..

It won't exactly directly solve the problem. We're still trying to identify the problem and so far got 1 N45Sf having similar problem.
So we need more data whether this problem is across the whole N45SF or it just a defect..

MSI AfterBurner: http://event.msi.com/vga/afterburner/download.htm
Furmark: http://www.ozone3d.net/benchmarks/fur/

Download, install and run both of it. Start Furmark and monitor the MSI AfterBurner, you should see some graph on it. See if the 3rd and 4rf graph is constant or there is sometime dropping..

Does seems like hardware now ><

Try this
http://somemorebytes.com/wp/wp-content/upl...gerUni-1.01.zip
Run it as admin, disable PowerMizer, run the test again..

This post has been edited by lee_what2004: Aug 22 2011, 09:38 AM

I mean the thumbnail beside this thread title, see other thread like Vaio, DV6..
http://forum.lowyat.net/NotebookSpecificDiscussion

That is F@H ?

Could be the cable...

I only use Wormz for rainmeter

Run powermizer, untick enable powermizer, instant apply.

or try Fixed Performance Level,
maybe can try adjust the "Overheat Slowdown Override"

Seems like your GPU don't like games
Have you update DirectX ?

This post has been edited by lee_what2004: Aug 22 2011, 01:46 PM

Looks to me installed screen protector..

http://www.microsoft.com/download/en/details.aspx?id=8109
+60-3-6279-5077

Can open device manager, under monitor, open generic monitor properties, details, hardware id,
what's the model ?

Go to the "details" tab, change to hardware id.

Hmm, couldn't find much on its spec other than it being used on old Alienware but that's 17'' 1920x1200...

This post has been edited by lee_what2004: Aug 22 2011, 03:13 PM

What about if you run ThrottleStop and force the CPU to run at 1.8GHz and try the furmark?

Run throttlestop, tick use multiplier, change to 18, then click turn on.

My phone can't load the image, can tell me what happen? Not smooth? Or worse?

We can't control voltage in most notebook...

This post has been edited by lee_what2004: Aug 22 2011, 05:21 PM

If run it lower at 1.2GHz?

Can you do the MSI AfterBurner and Furmark test?

This post has been edited by lee_what2004: Aug 22 2011, 06:59 PM

Glossy, think Mirror.
Matte, you will see light being blur..

http://event.msi.com/vga/afterburner/download.htm
http://www.ozone3d.net/benchmarks/fur/

When you point light to the screen, can't see clear reflection ?