u must teach me sifus !



but isnt tat take with 60D?

This post has been edited by Breakers: Aug 25 2011, 12:23 AM

can i skip from pr1.1 to belle? and can it be vice versa? means from belle to 1.1 if i 1 2 update the offical anna?

*belle is tempting me...* =p

me too

From 1.1 to belle i can't guarantee but at dailymobile forum i see ppl do From 1.2 but i think it's safer to get the Anna files first. U can flash back to 1.1 but not any version. There's a special Scandinavian version and it's the only version u can use to downgrade. Other versions will brick ur phone. So From there u can flash to Anna again.

i c i c, thx thx..so the ways from flashing 1.1 to anna is't the same wit the guide that previously some forumer post at here??

This post has been edited by jay2you: Aug 25 2011, 01:03 AM

1.1 or any version u can flash to belle oso.....u just need the anna files to trick Phoenix that ur phone is anna

Flashed successful! ivo777 1.5 version...

This post has been edited by jay2you: Aug 25 2011, 02:09 AM

10 time format phone... test several cfw.

now using delight 2.0 :B

wow, since the leaked ver of Belle, now people are flashing custom firmware like people using android. =.="

---

Added on August 25, 2011, 5:27 amyeah, they should at least give me 2 Samsung Galaxy Tab 10.1 for upping their names

This post has been edited by Leo the Lion: Aug 25 2011, 05:27 AM

-remove-

This post has been edited by Leo the Lion: Aug 25 2011, 05:51 AM

This post has been edited by xaiemanx: Aug 25 2011, 05:59 AM

Since Belle is so “hot” now eventhough it’s still in BETA. So I would like to share bits some of my tutorial to help those who is eager to try Symbian Belle on their device. Take notes, the tutorial only works on Nokia N8 since the firmware is only suitable for this device.

Preperation:

1. Backup all your important data
2. You need this 3:

Phoenix - download it from my blog
Belle Beta Firmware – get it here
Anna Firmware – get it here



Guide:

1. After download Phoenix, Belle Beta Firmware and Anna Firmware, install Phoenix first, then extract both Belle Beta Firmware and Anna Firmware to your desktop.
2. Copy RM-596 folder (including everything inside), then paste it into this directory “C:\Program Files (x86)\Nokia\Phoenix\Products\“.
3. Run Phoenix applications, go to File>Open Product, then search RM-596 by using the filter. Found it, select then click Ok.
4. Connect your phone via USB Cable in Ovi Suite mode
5. Click Flashing>Firmware Update, then select the variant supposedly “Product code: 0598797. Description: china_prc_dark_grey“, click OK.
6. Check “Dead Phone USB Flashing” and then click Options.
7. Delete both RM596_APE_ONLY_ENO_11w15_v0.148.fpsx and RM-596_M025.44.emmc.fpsx.
8. Change the:

RM-596_022.014_79.92_prd.core.fpsx to RM-596_111.010.0606_79u_prd.core.fpsx
RM-596_022.014_28.01_Chinese_PRC_79.92_prd.rofs2.fpsx to RM-596_111.010.0606_13.01_MEA_A_79u_prd.rofs2.fpsx
RM-596_022.014_C01.01_PRC_79.92_prd.rofs3.fpsx to RM-596_111.010.0606_C04.01_MEA_1_79u_prd.rofs3.fpsx
RM-596_022.014_U02.01_79.92.uda.fpsx to RM-596_111.010.0606_U07.01_79u.uda.fpsx

9. Click OK
10. Click Refurbish, then follow the instruction as below:

- Disconnect USB Cable.
- Press Power Button at least 8 seconds. ##I highly recommend you press a little longer than 8 seconds till you feel your phone vibrates 2 time
- Connect USB Cable. (it will immediately recognize your device)
- Click OK

11. Phoenix will start flashing Belle firmware for your phone. You may need to wait a little while though
12. After flashing Belle firmware is done, it will appear a SUCCESS message. We’re still not finish here yet.
13. If your phone boot differently than the previous firmware like Anna/Symbian^3, means you have successfully installed Belle firmware into your phone.
14. After setting up your Nokia account (or just skip it like in the video), do a hard reset using *#7370# in order to reduce the potential of bug (since it’s still in BETA).
15. Restore your phone with the backup you have made
16. Then have fun with your Belle :-)


Problem you might be facing:

In case if the flashing didn't work out, try again from step 1. This may happen because you did not press power button long enough till the phone vibrate 2 times like in step 10. If that's not the case, it might be that you did not install Nokia Ovi Suite or update the driver inside your pc.

If your phone wont start/bricked, Press Power buttons like more than 10 second, then press power button again so the phone could start again. If this doesn't work, try 3 hard reset button: Hold “Volume Down + Camera Key + Menu Key” and press power button until your phone vibrates.



What will it look after flashing:



*Do it at your own risk.

Follow my blog:

such as??

means if anything happen to your phone like bricked, crashed, warranty void , damaged and etc wont be responsible by anyone except yourself.

problem solved after installing official anna updates for n8 from nokia. Maybe it was me who wasn't patient enough~ huhuhu~

btw, that picture was taken using 600D and long exposure of 1 minute~ notice that the starry effect is all over the place, not so clean, where got nice picture? if n8 camera have the ability to manually set the shutter speed, taking that kind of picture should be achievable~

upgraded OS to symbian anna last night! even with broadband connection, the whole process took about 1 hour~ but it is worth the wait~ I would wait for official belle update although the unofficial ones seems tempting to me as I am using this phone for work and I cant afford to let the phone becoming brick~

The leak belle is quite stable haven't had any problem yet till now

---

Added on August 25, 2011, 10:33 amMine is taken using a 60d . N8 no shutter control so cant

This post has been edited by aspire2oo6: Aug 25 2011, 10:33 AM

Belle is seducing me thx sifus for explanation..

I will getting soon my N8 from my sister after she get Iphone 4 in two months time, by then i hope Belle is available for N8 user..

For a brand new N8, the free RAM is about 170MB

If you have it done at Care Center, how much free RAM do you get after flashing and installing new Anna?

This post has been edited by Optiplex330: Aug 25 2011, 12:10 PM

free ram or phone memory?