Oh yeah already have that applied Thanks tho!

Hi, do you have a physical shop?

Thanks

Whats the current price for hd3 , a2+? Any idea where csni get them?
Are stands worth it? Or should i go with something else?

This post has been edited by vcxv: Oct 8 2017, 08:54 PM

anyone wanna let go their used D1?

Hi Reubs, apology for the delayed response. Hope that this might still help. We are mainly operating online and on-site at the moment, so we do not have a physical shop yet. We are the main reseller currently who provide advice and support online. However, audition can still be arranged if still needed.

Folks, we are running promotion for Audioengine HD3 at only RM1899 now with our online partner 11street in conjunction of #MYCYBERSALE 2017. Offer is extended until Oct 24. Be sure to grab it now especially if you have been eyeing on it. Link's as follows.
http://www.11street.my/productdetail/audio...s-pair-52860565

Is there offer being extended? Considering to get 1

I have a perfect condition AudioEngine s8 subwoofer that i am selling. Make me an offer.
I also have a pair of A5's that are not as loud as it used to be but I think that can be rectified quite easily.

Make me an offer for one or all of them. Will leave that up to you.

Thanks

May I know where else I can audition the a2+?

After 7 year of usage my audioengine A5 developed the infamous popping and crackling when it is activated (no self-shut dead)/No input state/volume min to max makes no difference.
The first symptoms is very low volume (maxed out on volume knob) when operating from cold state, after a while (amps getting hot) the volume gained and become normal loudness (you can lower the knob now). Then after further usage hours(in my case, months) later, the popping and crackling comes and goes randomly. The final stage is popping and crackling non-stop from cold state.
Below are my findings while opening the back plane and checking out at the amps boards. Some caps were blown (obviously). One resistor looks blown too (might be just the foam melted on it). Overall i will try to replaced all the blown caps and resistors, see if it will resurrect the A5 (of course I need to find a shop to do this)



If anyone can recommend me good audio/electronic shop that can replaced those caps with extra durability and heat capacity would be very grateful for your help (maybe custom upgrade those electronic components too)

Thanks for reading my report so far

anybody selling their audioengine s8?

I have a pair of white A5+'s I want to let go which are in perfect condition.
Need the funds for my wedding and its just sitting on my table hardly being used.
At max also once in half a year.

Make me an offer

This post has been edited by Watta??: Mar 18 2019, 02:15 PM

Anyone know of a physical shop in KL where I can go check out a set of Audioengine HD3s?

Try Gamers Hideout. They carry Audioengine products. Call before going to confirm availability.

Not sure Mr. Chin still run the business

Malaysia Distributor:
Digital Audio Studio
CK Chin
012-290 5989
72, Jln Brunei Utara, Pudu 55100 KL

Seems the price has gone up a lot.

Was thinking if there is anywhere to trade in A2+ to upgrade to A5+ ?

guys..i know it's an old thread, maybe someone can shed some lights to the issue i am having..my old audioengine A5 right speaker (the passive speaker) got very low or soft sound to it..i manage to change some caps but the volume is still low abt 30% - 50%..potentiometer seems good that no issue in increasing or decreasing the volume..but cant confirm if that is the real problem..anyone having the same issue and managed to solve it?

This post has been edited by pronester: Jan 4 2021, 12:21 PM

Double check all connections to the passive speaker. Some problems occur because connection isn't proper, could be the wire connecting between the two, and loose terminals at the passive/active side inside the speaker box.

thanks for the response..i will check again inside the speaker with the amp in it..

anyway i tested the passive with other speaker system and the sound is normal/loud..there shud be some problems inside the amp unit