---

Added on July 27, 2011, 12:40 amanother thing is, when doing wet sanding do we really need to use dishwasher detergent?
cuz mine not really skin friendly. normal body soap can ahh

thanks for the compliment
but im trying to stay away from spray
later need to spray every part

thanks for the compliment
but im trying to stay away from spray
later need to spray every part

try my hand on sanding. used mr compound coarse for polishing. do i need to sand more (1500 grit) to make it shiny like normal again?



and OO Gundam.

---

Added on July 27, 2011, 12:40 amanother thing is, when doing wet sanding do we really need to use dishwasher detergent?
cuz mine not really skin friendly. normal body soap can ahh

no nid every part ba  , separate em into , armx2, legx2, head+body, lower body , other weaps n armor.
or if u lazy or want to save, spray em on full assemble mode.

oh ya better mask those transparent part during topcoating

top coat make the kit look nice lar

I use plain water only for wet sanding.... 

add dishwasher can get better result??

00q rite?

^ seriously??
Effective meh?

no effect on the plastic except as a lube eh?

yup, just now open up my SF wing to see what's wrong with the rotation mechanism, mana tau it stuck inside, then take it out and spray some WD40 and now it move very smooth 

but WD40 is quite messy because of the pressure it spray out is very high

---

Added on July 27, 2011, 9:43 am
i guess wont have any problem since it is something like an oil? dont know la, let me try first, but i doubt it give any problem

Just Complete. Will take picture later



Takes about 2 weeks time to complate

Color:

White
Off white  (Gaia 001 White + Gaia GP03 blue abit) -> Gaia 001 White

Dark Blue
Gaia 002 Black -> Gaia 061 Midnight Blue -> Gaia GP03 blue coating

Blue
Gaia 001 White -> Gaia GP03 Blue -> Gaia 024 Cobalt Blue

Grey Blue
Gaia 001 White -> Gaia 063 Blue Grey -> Gaia 062 Medium Blue

Grey
Gaia 075 Neutral Grey V -> Gaia 074 Neutral Grey IV

Yellow
Gaia 001 White -> Gaia 025 Orange Yellow -> Gaia 005 Yellow

Red
Gaia 001 White -> Gaia 005 Yellow -> Gunze Wine Red -> Gaia 003 Red

Green (Head Camera and eyes)
Hand paint using Tamiya Enamel Green + Yellow + Clear Blue

Panel Line using Tamiya Enamel Black, Dark Grey. Also with Copic Modeler 0.02 Marker Black and Warm grey

All coated with Gaia 008 Flat Clear

a not so gentle reminder, WD40 can damage plastic and rubber parts!

seriously, this is why airsoft players don't use it on their gun. <-- a little OT info. it may cause discolouration on plastic and most importantly, it will damage the polycaps parts (loose elastic). lubing wd40 on nerf guns is also not advised as it will damage the "O" rings.

so NO to WD40. if you really need to lube your gunpla, use baby oil or singer oil. these are mineral oils, which are safer on plastics. plus, baby oil smells nicer.  u can also use silicone spray, but some silicone spray can cause discolouration on plastic.

Check out my sign. Unicorn + sinanju + special weapon letting go