i'm having fun with undervolt setting now.
231*13=3.0Ghz, vcore 1.27V (stock 1.35V)
cpu/nb 1.23V, nb freq 2.3Ghz
ddr1854 CL9 1.55V
HT link 2Ghz


wow can disable core by core? disable at bios or software - turboV?

This post has been edited by lengchai86: Aug 10 2011, 05:54 PM

bios...

this clock just nice.
x6 1090t already no stock?
only can get x6 1075t?
less one thing to play with.

imc so far no my attempt stable for 3.1ghz but the ram lah stuck up at certain setting n clock only

this is my 1st time oc cpu. please give some comment and suggestion.
[attachmentid=2380472]
[attachmentid=2380473]

1st time OC, then its very good OC result. oredy reach 3.99Ghz a.k.a 4.0Ghz which is very hard for my setup to achieve. 3.9 on Deneb is like a dream for OCer. only a few can do, else didn't even reach 3.6 like me

This post has been edited by lengchai86: Aug 11 2011, 05:23 PM

56c consider hot? im using hyper 212+ cooler.
what else i can oc?
i feel my nb abit hot. how can i know the temp?

Just dont go above 65c can already

nice clock bro, doing not bad.
i think the full load temperature just nice.
what ram you have there?
can try set dram voltage to 1.5v,
i mean try to use minimum voltage see how.

using Corsair PC1333 2GB X 2.
set dram voltage? is to set the voltage of ram? is oc-ing the ram?

yes, set the voltage of the ram.
700mhz, consider overclock already.

i already set dram voltage to 1.5v but nth change.
i saw come ppl nb frequency and dram frequency higher. how to make that?

nothing will change if u set the voltage only..
nb freq: adjust multiplier or fsb
ram: adjust ratio or fsb

you can lower your cpu multiplier and increase the fsb. then the HT link and cpu/nb freq will increase. but remember to use lower HT link freq to make sure its not run above 2000Mhz. cpu/nb freq you can run higher freq but mybe need a slightly more voltage to stable.

haha, nothing change is good.
just use the minimum stable voltage.
cpu nb and dram clock are tight to the htt reference clock.

Water cooling is a nice thing.

Previous using cm 212, 3.85ghz already highest 58c.
Now using modded h50. 4.05ghz only 53c max.

Finally my 965be break 4ghz mark.
Still tweaking vcore. Finally break 1.5vcore. Nice temp.

This post has been edited by taxidoor: Aug 14 2011, 11:58 AM

53'c full load on 1.5v vcore.
that is great.

nice temp man

Good job my friend for your 4GHz. But frankly speaking it was an easy run for 4GHz @ C3 Deneb base.

CL8 / 7 give u better performance. By increasing the multi to 19 and raise the FSB up to 210 is a basic thing dude. 4.2/4.3GHz on air is a dream for Ocer i can say.

This post has been edited by verdict: Aug 15 2011, 09:02 AM

WC does help but at d end of d day, chip itself matters d most. after diagnosed with hands of lemong (thx to u know who u are ), i realised that luck does play a part. sometimes u get decent chip while sometimes u got one which u can do nothing bout it, regardless how good is ya cooling solution.