Does the screw holes match too?
I'm thinking the choc pro is a clone of FILCO

He probably means the top cover.

EDIT : My bad (refer next post)

This post has been edited by kaiserreich: Oct 26 2011, 05:55 PM

It wont decay if it's well made.
There's a cupboard made of Jati (teak) at my grandma's place made in 1950, still standing nicely without any defects seen.

But this is hardwood, not sure about the type of wood used for those keyboards however.

from : http://geekhack.org/showthread.php?23455-I...e-and-row-4-set

This set is totally crazy, gonna get 1 set of this.
PBT dyesubbed. Probably looking at $20 plus shipping ($14)

the pictures are the proposed designs

If anyone wants to join me to save shipping, PM me.

This post has been edited by kaiserreich: Oct 31 2011, 02:42 AM

Yeap, cyclone is correct


One of the better rubber domes out there when it was new.
In other words, no.

Means it has 1.25 unit width
For FILCO/DUCKY type keyboards, these refer to the ALT/CONTROL/WINDOWS/MENU keys

I hope it gets combined with Group Buy Round 4.
Donating too much money to US postal service already.

For typing case, your wrist are supposed to be floating, meaning, the base of the palm is not supposed to touch the table.
I have not game much lately, so I don't know how that would affect my wrist since floating palms for that case is rather tiring.

This is what i see from the pictures, floating hands, but sadly, I don't practice the sitting posture.

These are up
http://geekhack.org/showthread.php?23572-P...3856#post443856

Custom PCB + plate


So that you can do this, plus some win keys in between the CTRL and ALT position


What's left now is a CNC Aluminum case


Why does so many group buys happen all at once

This post has been edited by kaiserreich: Nov 2 2011, 12:50 PM

It might fit, but not with the same layout, since it has no holes for the 2 Unit Numpad zero, Numpad Enter and Numpad +, plus you need to rewrite the code for the numpad.

I'd take the easy way out and buy a numpad, and put it on the right side of my mouse if I ever need to key in shit loads of numbers.

Shipping is another $14


Btw, does anyone knows who makes nice acryllic molding?


thickness: 3mm
Outer dimensions 129×440×10（mn)


Thickness: 3mm
Outer dimensions: 129×360×10（ｍｍ）


Acrylic Thickness: 3mm
Measures: 290 x 103 x 13mm

The HHKB one fits the Poker nicely

@cyclone,
I thought about getting the bird electron cover but RM140 for a piece of acryllic is pretty steep.
On side note, would you like to advertise on your sales thread whatever that we can custom order from the Leopold website, such as the custom keycaps/wrist rests etc?


@bai
I'm asking the acryllic guy at garage sales to give some quotation but still no info on that yet.
Maybe you can help us ask about the costing and stuff, then we make a bulk order. I think most of us here uses 104-key keyboards but I'd like to put them on my 87-key keyboards and Poker as well.

The design of the acryllic is pretty simple

Bend the two sides of the acryllic
And then glue on some extra acryllic on both sides of the edges to prevent the cover from moving around.
Finally add some teflon/rubber feet at the edges of the cover so that it does not scratch the case.

The hard part is to get perfectly 90degrees with little bending radius to make it look like the ones in the picture.

This post has been edited by kaiserreich: Nov 3 2011, 04:23 PM

Too many options really kills the distribution of these sets, making it less cost effective.

Previous group buy with 190 sets of 100+ keys was only $40. Pretty darn cheap.

I don't think rubber feet is an issue. Maybe we can buy some teflon mouse feet and cut ourselves or something.

As for the measurements, I am not sure about the TKL and the Full sized versions.
But the Small one fits the HHKB and the Poker nicely.

Then again, just need a ballpark figure, so that if it's affordable, maybe we can start a bulk for that.

EDIT:

From: http://geekhack.org/showthread.php?20284-H...le-in-use/page2
This the feet I am referring to.
Come to think about it, we can just buy those sticky cloth tape, cut it to size, and it should do fine for a feet. Those tape are cheap.

I made some measurements on my FILCO TKL, and the cover for the realforce TKL version should fit nicely. Can always make a sample out based on the dimensions since if it doesn't fit, I can just eat it up and put it on my realforce

This post has been edited by kaiserreich: Nov 3 2011, 05:05 PM

SS6Gv2 is non illuminated, plus if you want that, just go for leopold, cheaper than SS6Gv2, similar or better quality

http://forum.lowyat.net/topic/2012978

Switches available are
Blue
Red
Black


SS6Gv2 uses Black switches
Razer BW uses blue

Method 1: Normal Airmail
Method 2: Arrives in Malaysia as e-parcel
Method 3: Arrive as Poslaju

Pick your kill