QUOTE(maxgenesis @ Jul 27 2011, 02:23 PM)
lol...how sure u are is symptom of mobo burn? might be some firmware bug or software bug?This post has been edited by ChaosSixth: Jul 27 2011, 02:28 PM
HTC Sensation with Sense 3.0 Official Thread, HTC's 1st Dual Core Smartphone
|
|
Jul 27 2011, 02:28 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,420 posts Joined: Sep 2009 |
|
|
|
|
|
|
Jul 27 2011, 02:36 PM
|
![]() ![]() ![]() ![]() ![]()
Senior Member
854 posts Joined: Mar 2007 |
As of late, there seem to be some network issues with DiGi and Maxis. I use both lines and both of them are giving me calls, sms and data issues everyday. WTH?
|
|
|
Jul 27 2011, 02:49 PM
|
![]()
Junior Member
16 posts Joined: Mar 2009 |
Well guys.. i just did some further experiment and it's does really proves that my phone won't be able to receive / outgoing call in certain area although there are signal coverage.
I stay in ipoh and work at simpang pulai area, while in this area, the signal bar fluctuate between fullbar to 1 bar on my sensation and i can't receive and do outgoing call, but with my old htc touch 3g, the signal bar is consistent 3 bar and no issue. If I drive out ~2 to 3 KM from my work place.. woalah.. instantly in/out call with a snap of finger So does this meant the sensation receiption signal is weak ( or just in my case)?? Anyway i will complaint to Digi tomorrow.. sigh~~~~~~~~~ |
|
|
Jul 27 2011, 02:56 PM
|
![]()
Newbie
0 posts Joined: Jun 2011 |
Guys curretly this prob already struck me..my lock ring doesnt seem to respond to my touch.darn..need to slide it up few times..i saw someone post the other day with the youtube video..anybody experience this?i restart the hp feq time same result.
|
|
|
Jul 27 2011, 02:57 PM
|
![]() ![]()
Junior Member
281 posts Joined: Sep 2007 |
|
|
|
Jul 27 2011, 02:59 PM
|
![]() ![]()
Junior Member
106 posts Joined: Oct 2010 |
|
|
|
|
|
|
Jul 27 2011, 03:00 PM
|
![]() ![]()
Junior Member
281 posts Joined: Sep 2007 |
QUOTE(jlai2 @ Jul 27 2011, 02:56 PM) Guys curretly this prob already struck me..my lock ring doesnt seem to respond to my touch.darn..need to slide it up few times..i saw someone post the other day with the youtube video..anybody experience this?i restart the hp feq time same result. 1. have u been using other phone's charger instead of the one provided from the box? if thts the case then stop using it and go back to your original charger.2. if u are using the charger from the box then u can try pull the battery and leave it for an hour or so to allow static to discharge then try to press the power key to drain excessive power in the device's capacitor and then put the battery back in and boot it up again. 3. if the above does not work. let the phone discharge the battery slowly until it turn off itself and then put it to charge and leave it the alone until it is full. This post has been edited by lcs87: Jul 27 2011, 03:05 PM |
|
|
Jul 27 2011, 03:03 PM
|
![]()
Newbie
0 posts Joined: Jun 2011 |
|
|
|
Jul 27 2011, 03:03 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,420 posts Joined: Sep 2009 |
hmm..i guess my problem is some random software issue i think..hmm..
|
|
|
Jul 27 2011, 03:05 PM
|
![]()
Newbie
0 posts Joined: Jun 2011 |
|
|
|
Jul 27 2011, 03:07 PM
|
![]() ![]()
Junior Member
281 posts Joined: Sep 2007 |
QUOTE(ChaosSixth @ Jul 27 2011, 03:03 PM) the hardware does not burn that easily 1 la..its probably some software issue..where the code go haywire under some weird circumstance...Added on July 27, 2011, 3:09 pm QUOTE(jlai2 @ Jul 27 2011, 03:05 PM) that could be the problem...i think mili only can produce 5v/500mA... and i think htc sensation requires 5v/1A...This post has been edited by lcs87: Jul 27 2011, 03:09 PM |
|
|
Jul 27 2011, 03:10 PM
|
![]()
Junior Member
16 posts Joined: Mar 2009 |
QUOTE(kwchan_7 @ Jul 27 2011, 02:49 PM) Well guys.. i just did some further experiment and it's does really proves that my phone won't be able to receive / outgoing call in certain area although there are signal coverage. Updates... Finally i know what's the issue is, for some reason, my phone network mode is preset to GSM/WCDMA auto. I then re-select to GSM only and the signal bar suddenly turn full bar and no more issue on incoming and outgoing call...I stay in ipoh and work at simpang pulai area, while in this area, the signal bar fluctuate between fullbar to 1 bar on my sensation and i can't receive and do outgoing call, but with my old htc touch 3g, the signal bar is consistent 3 bar and no issue. If I drive out ~2 to 3 KM from my work place.. woalah.. instantly in/out call with a snap of finger So does this meant the sensation receiption signal is weak ( or just in my case)?? Anyway i will complaint to Digi tomorrow.. sigh~~~~~~~~~ Will monitor and see hows thing go later today. Hopefully this is the culprit... |
|
|
Jul 27 2011, 03:18 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,420 posts Joined: Sep 2009 |
QUOTE(lcs87 @ Jul 27 2011, 03:07 PM) the hardware does not burn that easily 1 la..its probably some software issue..where the code go haywire under some weird circumstance... yah i do feel like hardware wont burn that easily..and now no problem persist..might update u all if i still receive the problem..so far i use for 1month plus.i jz got this problem once..=)Added on July 27, 2011, 3:09 pm that could be the problem...i think mili only can produce 5v/500mA... and i think htc sensation requires 5v/1A... |
|
|
|
|
|
Jul 27 2011, 03:25 PM
|
![]() ![]() ![]()
Junior Member
423 posts Joined: May 2007 |
|
|
|
Jul 27 2011, 03:25 PM
|
![]() ![]() ![]() ![]()
Senior Member
680 posts Joined: Jan 2003 From: Klang, Malaysia |
QUOTE(kwchan_7 @ Jul 27 2011, 03:10 PM) Updates... Finally i know what's the issue is, for some reason, my phone network mode is preset to GSM/WCDMA auto. I then re-select to GSM only and the signal bar suddenly turn full bar and no more issue on incoming and outgoing call... That means your current location 3G/HSPA is weak Will monitor and see hows thing go later today. Hopefully this is the culprit... |
|
|
Jul 27 2011, 03:33 PM
|
![]()
Newbie
0 posts Joined: Jun 2011 |
QUOTE(lcs87 @ Jul 27 2011, 03:07 PM) the hardware does not burn that easily 1 la..its probably some software issue..where the code go haywire under some weird circumstance... Yeah.the mili charger stadard producing 5v/1a.i check on the spec already..Added on July 27, 2011, 3:09 pm that could be the problem...i think mili only can produce 5v/500mA... and i think htc sensation requires 5v/1A... |
|
|
Jul 27 2011, 03:35 PM
|
![]() ![]()
Junior Member
281 posts Joined: Sep 2007 |
QUOTE(jlai2 @ Jul 27 2011, 03:33 PM) then you should refer to the reply i made earlier..i added something else that you can try to do to fix it:1. have u been using other phone's charger instead of the one provided from the box? if thts the case then stop using it and go back to your original charger. 2. if u are using the charger from the box then u can try pull the battery and leave it for an hour or so to allow static to discharge then try to press the power key to drain excessive power in the device's capacitor and then put the battery back in and boot it up again. 3. if the above does not work. let the phone discharge the battery slowly until it turn off itself and then put it to charge and leave it the alone until it is full. |
|
|
Jul 27 2011, 04:02 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,643 posts Joined: Aug 2008 From: Malaysia |
my goodness ... dunno why the battery dropped so fast these few days.
4 hours from fully charged and now left 15% =.=ll Before no such thing happened .. |
|
|
Jul 27 2011, 04:16 PM
|
![]() ![]() ![]()
Junior Member
374 posts Joined: Mar 2005 From: Sarawak |
check your apps
I installed minimal apps and most of the time use the phone as a phone (duh!) and play games, so far no problem. apps i got (other than games) 1. ES File explorer 2. Equalizer (messes with speaker phone function but can be fixed by disabling flip speaker) 3. Rock player 4. Dice Player 5. Juice Defender+ 6. Whatsapp 7. Viber 8. Dolphine Browser HD 9. ColorNote If you are having problems and suspect it to be software related, check your apps! This post has been edited by vccy118: Jul 27 2011, 04:17 PM |
|
|
Jul 27 2011, 05:05 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
5,464 posts Joined: Jan 2003 From: Über Special Forces Gaming Room |
install watch dog and check batt usage?
i found 3d bowling draining the batt 2%. uninstalled it and monitoring. |
| Change to: | 0.0316sec
0.66
6 queries
GZIP Disabled
Time is now: 6th December 2025 - 12:24 PM |