hy there...i'm new here with new (traded with vtec rock his TCCD), i actually hit DDR670@3-4-4-8@2.8VDimm (not stable thou), DDR660 Super-PI-ed 32M, n DDR630 stable after memtest n Super-PI-ed, wonder y Priming failed after 10minutes even after i lowered the CPU multiplier as low as 6x (300x6), 400x6...

different memory divider used.... different value of async latency/read preamble needed... and other timings as well

maybe i shud post the detail (RAM timings n others info) thou....
ok, will do tonite...
from previous thread...most guys do at 2.5v, 2.6v, i havent try this, but didnt dare to do at 2.9vdimm...

wow.... DDR670.... i'm curios to see this. can show ur screenshot?

i'll post it tomorow ok...yeap...managed to get DDR670 but... failed all stress test lor...only hit.i think already hit the ceiling...

as promise...
i did hit this clock after using clock gen, n fail all stress test ok...

[attachmentid=120238]

hello guys..i got a prob with my FC..i cant ever set it to 250 Mhz with this setting :


Genic BIOS Setting :
CPU Frequency = 250MHz
Hammer Fid Control = x9
HT Frequency = 3x
HT Width = Up 16 Down 16
PCIE Clock = 100MHz
AMD K8 Cool & Quiet = Disabled
DDR Voltage Contorl = 2.6v
Chp Voltage Contorl = 1.5v

DRAM Configuration :
Memclock Index Value (Mhz) = 200 Mhz
Tcl = 2.5
Tras = 8T
Trcd = 4T
Trp = 4T
Trrd = 2T
Trc = 8T
Trfc = 16T
Twr = 3
Twtr = 2
Trwt = 3
Tref = 3120
Twcl = 1 Mem clock after CAS#
DDR Output Driving = Auto
DDR DQ Drive Strength = Auto
1T/2T Memory Timing = 1T
Read Preamble Value = 5.5ns
Async Latency Value = 8ns
Dynamic Idle Cycle Counter = 256cycle
DDR Output Driving = Auto
DDR DQ Drive Strength = Auto
PDL Delay Adjust = Auto
DLL Speed Override = Auto
MTRR Mapping Mode = Continuous
DRAM ECC Feature Control = Disabled



My current spec are :
Processor - AMD64 3000+ Venice E3 (s939)
Mobo : DFI NF4 Infinity Ultra
RAM : 2x512MB GSkill FC
Graphic Card - Inno3D 7600 GST
HDD : WD 120GB 8MB
Optical Drive : ASUS 52x DVD-ROM, LG DVDRW
PSU : Fortron Bluestorm 500W
Window XP PRO SP2

hope somebody can giv ur opinion..

anybody can help me..now on everything at default also got BSOD

really? have you tried EVERYTHING at default speed?

yes..i already set everything at default setting..but when it come to window, after 5 sec, BSOD !!

maybe got windows corruption

window corrupt also can make BSOD ek?

ur's is G.Skill GBFC? here's mine

okies..thanks for sharing..i'll try it..
btw, how to now izzit GB or not ?

kulus it is everything ok?do u try that setting?

hi i'm using Team Extreem PC4800 DDR600 Samsung TCCD RAM Module n currently running at 315MHz @3-4-4-8 1T @2.86V (MemTest-ed it, Primed it, SuperPI-ed it - stable), if i increase VDimm to 2.9, shud be ok rite?coz... i felt (touched the heatspreaders) quite hot, way hotter than CPU (maybe around 50°C~70°C)...

hi..im using corsair xms xpert TCCD..nw running 265mhz (ddr530)@ 2.5-3-3-5 @ 2.65v
will post some screenie soon...after i set up my rig again..izit a waste i use TCCD on my 478 system? i thk kenot fully utilise its power

yes, honestly i think it's a waste since an average set of Hynix DT-D43 can do the same thing at cheaper price.

actually not thking to change but my previous DT-D43 kenot goes more thn 230 in dual channel becoz one stick is mix chip wif a CT indeed..i try single stick for the DT-D43 n max i can go is 250fsb @ 3-3-3-7 @ 2.8v...i try 3-4-4-8 @ 2.8v but not much increment

Hi guys,

Regarding this particular model:

Team Xtreem Hermes DDR1
PC4400 DDR 550MHz
512MBX2, 2.5-4-3-7, 2.7~2.9V

Is this TCCD loaded RAM capable of achieving 560MHz easily on loose timings (3-4-4-8) at a max of 3.2Vdimm? I think it's possible but i don't want to assume. My rig specs are as in my signature.

Owh, and also if it has any compatibility issues with my PC specs.

Thanx.

This post has been edited by leadaxer: Jun 3 2007, 12:18 AM