Take out the battery then open the bottom panel...

no screw to remove? will it void warranty?

No screw, the whole bottom panel will open up..

ok thanks...later go back try...install ram just slot in only izzit? not hazard to dm1?

Just slot it in

thanks again
1st time open the laptop "internal organ"...nervous...desktop open till no rasa liao

---

Added on August 17, 2011, 11:05 pmHow to on the webcam?

This post has been edited by tenchi0205: Aug 17 2011, 11:05 PM

go to
Start>All Program>HP>HP MediaSmart>Hp MediaSmart Webcam

or else...
you can click directly to HP MediaSmart icon on the bottom windows tab

Intel SSD X18-M Gen2

I bought the above SSD, then another caddy bay to convert it to 2.5".

for the changing part is actually quite simple, just open the back cover and screw off a few of screw only. It's more likely like how we change the desktop 1.
the troublesome part is just the OS. It's either use imaging to external hard disk / recovery disk which required external DVD ROM.

yes, more than enough. I'm running that now. Including MSSQL 2008 also.

---

Added on August 20, 2011, 11:08 amJust about yesterday, i notice this happen on my lappy. wonder do this bother you guys or not.

http://superuser.com/questions/240794/why-...-spiking-my-cpu

This post has been edited by khaikai: Aug 20 2011, 11:08 AM

hei guys.. what bag u are using to carry this toy around? I am considering getting STM Alley bag and ordering it online since it is nowhere to be found around in KL.

Hi, need advice here......
My laptop problem....
1) Sometime my laptop touch pad no function. Keyboard as well
2) Press single alphabet key but whole bunch of numbers come out. Even arrow also come with numbers as well.
3) When cursor point to icon, the pop out will blinking. Pls view Here
Is this hardware spoil? or kena virus?
Thanks in advance.........

2)If you boot into safe mode, does it happen ?
3) Does that always happen ? Looks like the keyboard stuck..

Try in safe mode, condition still d same. May be what u say is right keyboard stuck bcos sometime it keep right click ifself even I din't touch anything.
So what should I need to do now? send back to hp center?

Send back for warranty.

@lee_what2004
TQVM......

Morning, wonder anybody know what's the deal will be in this coming it fair @ mid valley for this dm1 coz i wanted to buy...... N to wait for that fair, still got 10days to go.... In fact i wanted it now..... Haha...

---

Added on August 23, 2011, 10:23 amSifu sifu, wats the diff between d
1-3022 n dm1-3200??

This post has been edited by ml5126: Aug 23 2011, 10:23 AM

http://forum.lowyat.net/index.php?showtopi...post&p=43991987

Thanks ya, tpl.....

---

Added on August 23, 2011, 5:38 pmNow the HP website wrote AMD Athlon, is it last time using AMD Zacate E350 but now Athlon E350? Wats the diff????? Or actually the same??

---

Added on August 25, 2011, 6:33 pmSifu- sifu........ NEED HELP URGENTLY..... I just bought my DM1 today.... I tried to uninstall some of the HP program... Then end up my 'fn' key not functioning liao..... Can anyone adv wat program to install back n how to install back the 'fn' key??? THANKS yoh..,,,

This post has been edited by ml5126: Aug 25 2011, 06:33 PM

I just ordered one for my sister from HP's website. How long does it take to reach? Is it like Dell(last time ordered, took about 3 weeks to arrive)?

Try install this
ftp://15.217.49.141/pub/softpaq/sp50501-51000/sp50681.exe

Hey guys, need sum advice over here. Got my DM1-3022au and added extra one 4GB DDR3 1333Mhz RAM. D original 2GB is DDR3 1066Mhz. Am thinking of replacing it wif another 4GB DDR3 1333Mhz RAM as i read on sum articles dat d RAM's speed will automatically underclock to match d other piece. Was thinking if i match both pieces of RAM wif same speed will enable them to utilise it's 'full capacity'? Or no?