mine is northwood, current voltage is 1.584V, is it save to go beyond 1.6V?

hello fren,

sudah overclock ka!!
warranty VOID!!  

i did 4Ghz with tat board..15 x 267mhz.

ur 2.66ghz with 20 x 133mhz.

its all on ur proc how far can go lo..
fsb 200mhz sudah 4Ghz lo.

ya i know..but personal warranty void cos the board is mine previously..i sold it to him few days ago..
temp was good..idle at 40ish..load at 50ish..

Hello OC senpai's,

Im using 2.8 Ghz ESample codename cranford,mobo is Giga 8ipe775/g 865 chipset,512x2 dual channel kingston KVR ddr333 winbond chip,psu just CM extereme power 430watt...temp idle to load is 44-54c...thinking of oc to 3.2 with stock fan is it safe?Water cooling vs air cooling?Water is better rite?Coz a sycthe ninja is around rm2++ i've got and offer from a fren selling his wc set(CPU,GPU,Northbridge) for rm300.Plz advice thnx all

PLz be gentle im a newbie ere hehehe

wah! soo many sifu help  
but which one should i take  
btw i'm using intel proc

Well its seems a failure i cant boot now..theres a beeping sound very fast ones..so where did i do wrong...ermmm   

All Sifu here,
I am using a Pentium4 531prescott 3.0ghz,
and a MSI 7028 915P Neo2 Platinum with DOT(Dynamic overclocking technology)
well, i have a CoreCenter software,
i am thinking of trying OC my Proc
and my ram is 512 corsair value ramDDR2 533
All i need is just increase the FSB in the corecenter is it?
or should i do in the CMOS?
how should i do?
and 1 more question
do increase vcore void the warranty?if i didnt burnt the proc due to OC
Noob in OC here
thanks for help

such a ayat adjective
well thanks antonio_zth

i've a problem here.evertime i restart my pc, my overclocked proc will also reset to normal.why?? and how to increase my volt 4 proc??using what software.now i'm using clockgen..hope u all can help me...my spec as my signature below.

I have a Pentium 4 Prescott (P4E) 2.8Ghz. I tried using the Clockgen software to overclock but failed even by a little bit. How do i unlock my processor anyway?

Using stock HSF with Intel D865PERL mainboard. 800mhz FSB 4x256mb Kingston Rams.

Mainboard = motherboard rite? not so sure abt that.

Im newbie in this kind of stuff. I've oc my cpu to 2.9. Issit posible to increase more? Im using a stock cooler for and the temp now is arround 47c. I saw some ppl post that the votage or anything else need to be adjust too. So, can any of u guys here help me out with this. btw, im using an p4p800se asus mobo

any soft modd to overclock my machine, try to search for it.. didnt found it

Product: ThinkCentre A51 8123-KAB [change]


Operating system: All [change]

Original description: Based on 8123-32A: Intel® Pentium® 4 Processor 515, 256MB, 80GB 7200RPM S-ATA HDD, PCI Desktop (3x4), Intel Graphics Media Accelerator 900, 48x CD-ROM, 10/100 Ethernet, Windows XP Professional


thanks guys

not really satisfied. but if it goes more than 55c will my processor fried or mayb damage? :confused;

Hi i'm noob in OC. Is my processor and motherboard suitable for overclocking?

Below is my system spec:
CPU  : Intel Pentium 4, 2800 MHz (14 x 200) 800FSB L2:1024KB on Cooler Master Jet 4
MOBO : Gigabyte GA-8IPE1000-G
RAM  : 1.5GB Kingston Value Ram DDR 400
PSU  : Enermax EG465P-VE (460W)
DC  : Grandmars Redeon 9550 Infinite (Core:400 / Memory:700)

Can anyone guide me for Overclocking my system?

Thank a lot.........

Yes, is 865pe, the voltage is manage by motherboard, i never adjust it. Do i need to fix it manually?
My 1.5G RAM is 2x512mb + 2x256mb, its ok? and For the FBS:DRAM, wat value should be?

Hi again...I just wanna ask about the FSB:DRAM ratio. Wat issit actually?
Here's mine, issit a good to have a 1:1 or there is a better ratio?
Need guidance from some pros pls.

Ohh okay, now I get it. Can it be tweak to make it works faster than cpu? Actually, how? Hmm....but I noticed somethin, my ram actually works at 333, but now it works at 266    So this mean the lower it is, slower rite? It was 333 before I tweak the timing from 3-4-4-8 to 2.5-3-3-7. Can tell me wat's wrong? Thx   

A newbie learning here 

New burn-in processor method.
Overclocked ur proc UNDER defaults voltage..
Results ! P4 630 3Ghz @ 3.825Ghz AT 1.34volts! Defaults 1.4volts!


method:
1)overclock proc at default voltage to max (prime stable)
2)under volts at one notch..prime again..
3)keep under volts until prime95 unstable/error.

ive successfully under volts my P4 630  to 1.34volts.
from 1.4v,1.38,1.37,1.36,1.35 to 1.34volts.
Runs colder & ROCK Stable.

is it i need to change my hsf? i m stock stuff...

the most stable temp is about how much?
49'c?

thx alot...btw, if i overclocked my ram too much , will the temp of the ram increased and caused my ram rosak?