Ok.. Now my problem is system auto-restart after OC.. I just bought new PSU oni.. maybe still not enuff juice..
PowerLogic Magnum300 300w True/pure power 600w max
Pentium 4 2.8E HT Prescott @ 3.06Ghz
MSI PM8M-V 800fsb VSL Motherboard
512mb DDR400 Pc3200 @ 219Mhz
Geforce 6600GT 128mb DDR3 @ 519/1160

My CPU idle temperature is 41c and the graphic card is 51c without OC.
After OC the CPU is 51c and the graphic card is 55c.
Problem is whenever i start 3D application. It runs for a moment and then the PC restarted. I don't think that temperature is going to cause any trouble. I was wondering if the 300w Pure power is enuff?

i think another way to check the rev. would be take out the chipset heatsink and see wat is written on it
from L628(or week 29,not sure) onwards will be c2..

hit 500mhz is not hard,hynix c4 can do it
ask gengstapo
many kvr 533 come with this chip

hi all, i already build up my new set of pc which are below :

e6600, gigabyte gds3, 2x512 kingston high performance ram, galaxy 7900 gs, Segate 250GB HD..

erm. then the main thing i here is to ask how to do oc for my spec?

i had tried 320x9 but the problem is the mobo cant detect my HD anymore.. help plz~

plz giv answer here, i know maybe i can get answer in other forum topic but it seems like i hav to take lots of time coz of over 100pages, so i prefer to make a new topic..

tq.. & plz help in how to set the ram in bios wif my mobo.. i hav no idea where to put those 4-4-4-12 / 5-5-5-15 or others..

Lasty, e6600 wif gds3 most suit oc mhz is ? (wif intel ori fan only)

oyea.. my e6600 is version B , it's writing --L629B361--

thanks for any1 who like to help out a newbie like me 

im oc newbie, how can i determine it is stable or not after oc..

hehe..definitely x bcoz of ram..coz i'm using corsair xms2 667c4...i think tat ram should b easily reach 900 if oc...

Is it necessary to update my bios in order to oc? I don't plan to stretch it to the max, just oc a little first with the stock HSF and hopefully the stock vcore.

And what are the risk of flashing my bios? Any tips to do it safely?

My mobo is a DS3 with F4 bios. Check my sig for the rest of my rig.