Hi everyone..Anyone here used a P4 550 3.4GHz proc before?mind sharing how good it is ar?thanks..

my foxconn intel socket 775 ati Xpress 200 sucks at overclock.. i'm using it to overclock my celeron 2.8.. just barely reach 3.3 but keeps changing back to default 2.8.. anyone uses this board?

Im using Foxconn 945P7AA-8KS2 and its a 945P board.Oc-ed my P4 511 2.8GHz and managed to reach 3.1Ghz max nia..

same like mine

just got patriot 2X512 ddr2 667 ram. wanna test on my abit il8 2nd rigs

This post has been edited by Devilc0de: Jul 5 2006, 11:36 PM

so we need to anti foxconn now!

post some screenshot ..

Freak`

This post has been edited by Freak`: Jul 6 2006, 10:45 AM

wana oc my current CPU, 2.4Ghz, then how much i should put for the vcore?
how far i can reach for my spec?

P4-2.4Ghz, prescott, revision= C0.

Click here.

This post has been edited by RokXIII: Jul 7 2006, 07:09 PM

raise ur fsb 2mhz at a time > prime atleast 10 min or more to see wether ur system got err0r or not .. repeat the same step until ur pc is not stable / cannot boot / auto restart after get into windows.. reduce ur fsb abit like 5mhz n then start prime for few hours to see wether ur system stable or not..

Freak`

actually my proc is 2.4A? 2.4C or wat? i have found in the intel website, the only 1 which is match with my proc spec is 2.4A, is that true?

btw, i m using the stock hsf n dunno wat brand of psu, idle temp is around 45 n full load temp is 61. So, if i keep on oc, will it bring any damage to my cpu?

1 more thing, the FSB:DRAM divider is 4:5, how do i change it to 1:1? i m a oc noob here, so if got any wrong, pls correct me. thanks!

google for cpu-z .. download .. it will show what type of proc u have .. prescott or northwood..

u dont know what spec of ur pc bro?? better get to know ur pc first before u oc .. if not .. mayb u can fry ur proc / hardwares when oc ..

get a good cooler .. i assume that ur proc is prescott .. mine prescott too .. darn hot..

about the divider .. look in the bios .. got option there ... btw which msi mobo r ya using?? 865pe chipset right?

Freak`

This post has been edited by Freak`: Jul 8 2006, 03:44 AM

i got checked by using cpu-z, sorry s didnt mention b4. but which 1 should i refer to? revision?model?stepping?

my mobo is MSI i865PE Neo2-PS. the proc is prescott, is quite hot but condition bcom better after i jus clean out the dust and apply the AS5 thermal compound....

u using i865PE oso, so izzit it cant lock the pci/agp speed? i look at the bios setting, dun hav such feature....

CPU-Z

This post has been edited by RokXIII: Jul 8 2006, 10:08 AM

im using IS-7 E.. oh.. forgot to tell u that u must lock ur pci/agp.. if not ur pc gonna crash becoz of that .. never use neo2 .. just look around in the bios ... it should be there ..

Freak`

i jus checked my mobo, it reli cant lock the pci/agi. so when i raise the fsb, the pci/agp will raise together. since my mobo cant lock the pci/agp, so after i raise the fsb, i set the pci/agp to the default value, 66.66/33.33, is this way working?

yea .. just set it to that value .. raise ur fsb until ur system restart / cannot boot into windows ... then decrease like 5mhz n prime it .. if not stable when prime .. decrease a lil bit .. until ur system stable at prime test..

Freak`

Only good mobo can have that kinda function.. think i btter change edi..

anybody noe hw much is the ratio for FSB:vcore i need set if i OC my PD 805

any other thing i need 2 take care?coz currently i m using stock HSF(with a 12cm fan blowing the HSF)..oni can push till 2.8..if 3ghz,the temp will increase till like 49-50C..scary sial

thats ur idle temp is it? or its load temp ?

Freak`

yes..idle temp