Antonio. have u ever noticed any improvements in fan stacking? i tried once before one CM aluminium pushing and the TT fan pulling. maybe i got 1 degree diff at the usual fan speed i use. but that could be because of normal flux in temp.

i buy another rad from moderno and well got a 3-4 degree drop and i run fans much slower now. heh happy camper here.
reading from aerogate2 probe as close as possible to the core and with a wad of as5 on it. typical temp now are 10 degrees above ambient (from thermometer on table) during idle, which used to be 13 about.

post temps after ur lapping man. i also curious. the block look ok to me so i lazy to lap it .

ah_fong : what u mean got water vapour out side the water passage.?
understandably the the acrylic top wont sit flush with the block, there is a black rubber ring there in the first place. it doesn't really matter. there is some water collecting in mine too. as long as the water is not flowing out of the block =D

- preferably not to use ONLY distilled water. use the one provided with the Kit. it should last u at least half a year or more with top ups. when u eventually run out use distilled water with some automotive solution.
look in the water cooling tips for reason y. http://forum.lowyat.net/index.php?showtopic=165070

"how to take out the water from the radiator cpu black and the pump without pouring out the coolant??? "
- this sentence doesn't make sense..... what do you mean??

Well the mosfets no choice if hot what i have is
- CM little chipset cooler stuck on it and a slow suspended fan over the cpu area.


liquid3d's article
http://www.madshrimps.be/?action=getarticle&articID=368
no wonder the WC setup looks familier. latest post on the WC screenies page.

AllnGap- Lol guess no one use round acrylic reservoir before

GB Galaxy got some pretty good reviews and quite good performance, wa for 500 i would have gotten that if it came out earlier. Try pcmoddingmy.com they had a review for it other sites try google it loh.
If got more money then and get the swiftech kits which is one of the best WC (not water closet) Lowyat Bulk order got bring in.

Not sure what TT bigwater review say got radiator problem and water tank problem. But its agreed that the bigwater is a entry model kit with a low flow and pressure pump and small tubings. the radiator not really a problem. heh well i got no problems with it loh.

Other than that. heh try the sticky for some general overview of what LCS will be like cheers and welcome to water cooling http://forum.lowyat.net/index.php?showtopic=165070