btw one more thg wanna ask...do u guys run prime test thn stil do other stuff wif the pc? or izit better to jz run the prime test? im priming while doin other stuff oso...

i do many thing when priming .. sumtimes watching movies, foobar

how do i change the fsb:dram timing...cant see any option to change in BIOS..using msi 845pe max mobo...btw how to install 2 prime95 bcoz it ask me to uninstall the 1st 1

This post has been edited by Mooneyes: May 28 2006, 10:06 PM

Advance Chipset Features>DRAM Timing Setting>DRAM Frequency(AUTO/200/266/333).. that is ur divider setting..

u dun need to installl 2 copy of prime95 for dat.. just run the app twice..

which 1 should i choose when oc...i have 384mb ddr...how long should i run prime 95 to see wether my sys stable

This post has been edited by Mooneyes: May 29 2006, 12:12 AM

6hour at least to assure that it is completely stable..
n more detail about ur ram n procs?..

my proc is 2.4b n my ram is ddr266 n using all standard hsf n psu

so just use the 266... and u'll run them as 1:1 divider..
forget about the hsf n psu first..
futher disscusion u should post it here dude..

hi all gurus...
hope to get some advice. thanks in advance.

here's some info of my P4 captured with CPU-Z, anything I can tweak to serve me better?

CPU


Mobo


RAM


SPD


I think the RAM speed is a bit low.. isn't? please advice.

guys one noob question here, i cant find the option in BIOS to overclock my proc/memory (mayb my mobo doesnt support?)

running P4 1.7Ghz, 768Mb pc2100 ddr, Ati9500

I hav successfully overclock my ATI easily with the help of rivatuner/ ATI tools but can this simple way apply to overclock the FSB, proc, memory? if yes, wats the software

TY

This post has been edited by toda6866: Jul 28 2006, 03:50 PM

Need some ideas/intro about the RAM timing and about the maximum volt input before the hardware spoilt

can my mobo ASUS P4GPL-X adjust the timing ram?
go to 2-2-2-5?

find the menu in ur bios
2-2-2-5 depend on ur ram too

This post has been edited by nelza_ax: Aug 17 2006, 08:59 AM

anyone know is there any software can display total watt computer use?

This post has been edited by m_redz: Aug 17 2006, 11:38 AM

anyone using gigabyte m55sli-s4 here? encounter any problems during OC?

This board not allow me to overclock, i'm noop in overclocking... can somebody help us...

This post has been edited by yu_8200: Sep 23 2006, 12:24 AM

I have found a very good watt calculator... hope the moderator can pin this up

eXtreme Power Supply Calculator

Its not even a software.. no need to download anything, just key in the hardware you are using and they will estimate the amount of power needed... cheers

hello sempai, I need advise

I having dillemma to upgrade graphic card or system. My current specs is as you see on my sig. Now I got O/c my (lock) Barton2500+ to 3200+ (2.2Ghz @ 200Fsb)

Should I upgrade to AM2 system (3500+) or to upgrade graphic accelarator from Radeon96xt TO nV 6800GT ?.

have my CPU gone bottleneck ? Will my AM2 system leap ahead my Radeon96xt to the max OR should my current setup with nV6800gt would have major performances?

guys... can u guys tell me more bout testing ram... i heard this thing, err.. ram burning.. i dont get it why hav to burn the ram.. and i oso tried to dload this ram burning /testing prog called memtest... but dont know how to use it....

i hav read some guide for ocing ram for my ddr400. seems lik my mobo has the diff menu from wat hav i read..
see:


and this is the info of my ram


how do i determine the
CAS latency time
RAS# to CAS# delay
RAS# Precharge
Act to Precharge Delay

based on my mobo..?